• 비파괴검사학회지
• /
• 제33권1호
• /
• pp.63-68
• /
• 2013

Some essential components in nuclear power plants are periodically inspected using non-destructive examinations, for example ultrasonic, eddy current and radiographic examinations, in order to determine their integrity. These components include nuclear power plant items such as vessels, containments, piping systems, pumps, valves, tubes and core support structure. Steam generator tubes have an important safety role because they constitute one of the primary barriers between the radioactive and non-radioactive sides of the nuclear power plant. There is potential that if a tube bursts while a plant is operating, radioactivity from the primary coolant system could escape directly to the atmosphere. Therefore, in-service inspections are critical in maintaining steam generator tube integrity. In general, the eddy current testing is widely used for the inspection of steam generator tubes due to its high inspection speed and flaw detectability on non-magnetic tubes. However, it is not easy to analyze correctly eddy current signals because they are influenced by many factors. Therefore, the performance of eddy current data analysts for steam generator tubing should be demonstrated comprehensively. In Korea, the performance of steam generator tubing analysts has been demonstrated using the Qualified Data Analyst program. This paper describes the performance demonstration program for steam generator tubing analysts and its implementation results in Korea. The pass rate of domestic analysts for this program was 71.4%.

• 대한한의학회지
• /
• 제33권3호
• /
• pp.200-230
• /
• 2012

Objectives: Ginseng, Panax ginseng C. A., white ginseng, has been used for thousands of years in Traditional Korean Medicine. Red ginseng can be made by a steaming process of white ginseng changing a variety of ginsenosides and ingredients such as dencichine. This article reviews red ginseng for mechanisms for pharmacodynamics and toxicity based on the content of ginseng's active ingredients, ginsenoside changed by steaming. Methods: The following electronic databases were searched: PubMed, Science Direct and Chinese Scientific Journals full text database (CQVIP), and KSI (Korean Studies Information) from their respective inceptions to June 2012. Results: Compared with unsteamed ginseng, the content of ginsenosides Rg2, Rg3, Rg5, Rh1, Rh2 and Rk1 called red ginseng-specific ginsenosides increased after the steaming process. Different ginsenosides have shown a wide variety of effects such as lowering or raising blood sugar and blood pressure or stimulating or sedating the nervous system. Especially, the levels of Rg2, Rg3, Rg5, Rh1, Rh2 and Rk1 were increased by the steaming process, showing a variety of pharmacodynamics in biological systems. Also, various processing methods such as puffing and fermentation have been developed in processing crude ginseng or red ginseng, affecting the content of ginseng's ingredients. The safety issue could be the most critical, specifically, on changed ginseng's ingredients such as dencichine. The level of dencichine was significantly reduced in red ginseng by the steaming process. In addition, the possible toxicity for red ginseng was affected by cytochrome P450, a herbal-drug interaction. Conclusions: The variety of pharmacological and toxicological properties should be changed by steaming process of Panax ginseng C. A., white ginseng. Even if it is not sure whether the steaming process of white ginseng would be better pharmacologically, it is sure that steaming reduces the level of dencichine causing a lower toxicity to the nervous system.

• 한국정보컨버전스학회:학술대회논문집
• /
• 한국정보컨버전스학회 2008년도 International conference on information convergence
• /
• pp.63-70
• /
• 2008

The authors, Tom Karygiannis of NIST, and Bernard Eydt, Greg Barber, Lynn Bunn, and Ted Phillips of Booz Allen Hamilton, wish to thank Steven Fick, Rick Korchak, Kate Remley, Jeff Guerrieri, Dylan Williams, Karen Scarfone, and Tim Grance of NIST, and Kenneth Waldrop and Beth Mallory of Booz Allen Hamilton. These individuals reviewed drafts of this document and contributed to its technical content. The authors would also like to express their thanks to several experts for their critical review and feedback on drafts of the publication. These experts include V.C. Kumar of Texas Instruments; Simson Garfinkel of the Naval Postgraduate School; Peter Sand of the Department of Homeland Security; Erika McCallister of MITRE; and several professionals supporting Automatic Identification Technology(AIT) program offices within the Department of Defense(DoD), especially Nicholas Tsougas, Fred Naigle, Vince Pontani, Jere Engelman, and Kathleen Smith. During the public comment period we received helpful comments from the following Federal Government agencies: the US Departments of Defense, Health and Human Services, Homeland Security, Labor, and State; the Office of the Director of National Intelligence; the Office of Management and Budget; and the General Services Administration. We also received several helpful contributions from commercial industry, including comments from EPCglobal, VeriSign, and Priway. Finally, the authors wish to thank the following individuals for their comments and assistance: Brian Tiplady, Daniel Bailey, Paul Dodd, Craig K. Harmon, William MacGregor, Ted Winograd, Russell Lange, Perry F. Wilson, John Pescatore, Ronald Dugger, Stephan Engberg, Morten Borup Harning, Matt Sexton, Brian Cute, Asterios Tsibertzopoulos, Mike Francis, Joshua Slob in, Jack Harris, and Judith Myerson.

• 산업경영시스템학회지
• /
• 제32권2호
• /
• pp.120-131
• /
• 2009

Most world-leading companies are aware that Environment and Health and Safety Issues are critical to the product quality and sustainable growth of their company. Environment-friendly efforts are seen in almost all aspects of business operations in an advanced nation. The Extended Producer Responsibility(EPR) and EU Directive on Waste Electric and Electronic Equipment(WEEE) attempt to tackle the growing quantity of WEEE by making producers responsible for the costs of the collection and recycling of their products at the End-of-Life(EOL). To implement the RFID-based integration system for EOL household electric appliances, such as washing machines and refrigerators, we analyzed the process of collecting, recovering, and recycling the EOL products returned from the distribution points. Furthermore, we proposed a soon-to-be process using the RFID-based integration system in the metropolitan recycling center(MRC). This soon-to-be process model is composed of RFID tags, readers, ALEs, applications and several devices. Through the introduction of the RFID-based integration system, we are expecting to see increasing traceability and real-time management for EOL products from customers, and also improvements in valuable reusable materials(VRM) produced from recycling processes.

• Smart Structures and Systems
• /
• 제17권6호
• /
• pp.917-933
• /
• 2016

In a prestressed concrete bridge, the magnitude of the prestress force (PF) decreases with time. This unexpected loss can cause failure of a bridge which makes prestress force identification (PFI) critical to evaluate bridge safety. However, it has been difficult to identify the PF non-destructively. Although some research has shown the feasibility of vibration based methods in PFI, the requirement of having a determinate exciting force in these methods hinders applications onto in-service bridges. Ideally, it will be efficient if the normal traffic could be treated as an excitation, but the load caused by vehicles is difficult to measure. Hence it prompts the need to investigate whether PF and moving load could be identified together. This paper presents a synergic identification method to determine PF and moving load applied on a simply supported prestressed concrete beam via the dynamic responses caused by this unknown moving load. This method consists of three parts: (i) the PF is transformed into an external pseudo-load localized in each beam element via virtual distortion method (VDM); (ii) then these pseudo-loads are identified simultaneously with the moving load via Duhamel Integral; (iii) the time consuming problem during the inversion of Duhamel Integral is overcome by the load-shape function (LSF). The method is examined against different cases of PFs, vehicle speeds and noise levels by means of simulations. Results show that this method attains a good degree of accuracy and efficiency, as well as robustness to noise.

• 인터넷정보학회논문지
• /
• 제13권4호
• /
• pp.95-102
• /
• 2012

차량 애드 혹 네트워크(VANETs)를 위한 응용들의 개발은 지능적 안전 운송시스템 제공이라는 매우 제한적인 명확한 목표를 가지고 있다. 공공의 안전을 위한 긴급경고 기술은 제한된 시간에 신속하고 효율적으로 경고 메세지를 전달하는 지능형 방송 기법을 필요로 하는 응용중의 하나이다. VANETs 방송 프로토콜 설계 시에 접근제어 계층에서 여러 노드들이 동시에 전송을 시도할 경우, 다수 패킷들의 충돌과 여분의 지연을 발생하는 방송폭풍 문제가 고려되어야 한다. 본 논문에서는, 효율적으로 방송폭풍 문제와 시간 한계를 해결할 수 있는 조기 지능형 경보 방송(EI-CAST) 알고리즘을 제안한다. 제안 알고리즘은 충돌시간(TTC)에 기초한 조기경보 기술과 퍼지논리에 기초한 지능형 방송 기술을 사용하며, 시뮬레이션을 통해 제안 알고리즘과 기존 경보방송 알고리즘의 성능을 비교 평가 하였다. 실험결과 제안 알고리즘의 경우 경보 전송거리 4 km 이내의 차량들은 사고발생 이전에 경보메시지를 수신할 수 있으며 패킷 충돌이 없음을 확인할 수 있었다.

• 디지털융복합연구
• /
• 제19권9호
• /
• pp.75-81
• /
• 2021

본 연구의 목적은 기업에서 클라우드 컴퓨팅 서비스를 채택하기 전에 판단 해야하는 중요한 요인들에 대한 우선 순위를 도출하고 평가한다. 연구 방법으로 전문가들에 대한 의사결정 사항을 반영하기 위해서 AHP 분석기법을 활용하였다. AHP는 복잡한 의사결정 문제를 계층적으로 표현하고 그 계층의 항목 간의 쌍대비교(Pairwise comparison)를 통하여 최선의 대안을 도출해 내는 의사결정 기법이다. 기존의 통계적 의사결정 기법들과 비교해 의사결정과정이 체계적이며 간단하여 이해하기가 쉽다. 또한 분석과정에서 의사결정자의 일관성을 판단할 수 있는 지표를 제공하여 절차 또한 합리적이다. 본 연구의 분석 결과 중요도 우선순위 항목으로 보안성, 신뢰성, 경제성 순으로 나타났다. 보안성의 하위 항목요인 중 제1순위는 접근권한의 통제성, 2순위는 외부위협의 안전성으로 도출되었다. 연구 결과가 추후 실무에서 기준으로 활용될 수 있는 방안으로 활용되는데 이바지할 수 있으며, 향후 클라우드 컴퓨팅 서비스 채택을 한 기업의 만족도를 평가하여 비교·분석하는 연구를 진행할 필요가 있다.

• 한국농공학회논문집
• /
• 제63권5호
• /
• pp.1-11
• /
• 2021

Soil moisture plays a critical role in hydrological processes, land-atmosphere interactions and climate variability. It can limit vegetation growth as well as infiltration of rainfall and therefore very important for agriculture sector and food protection. Recently, due to the increased damage from drought caused by climate change, there is a frequent occurrence of shortage of agricultural water, making it difficult to supply and manage stable agricultural water. Efficient water management is necessary to reduce drought damage, and soil moisture management is important in case of upland crops. In this study, soil moisture was calculated based on the water balance model, and the suitability of soil moisture data was verified through the application. The regional soil moisture was calculated based on the meteorological data collected by the meteorological station, and applied the Runs theory. We analyzed the spatiotemporal variability of soil moisture and drought impacts, and analyzed the correlation between actual drought impacts and drought damage through correlation analysis of Standardized Precipitation Index (SPI). The soil moisture steadily decreased and increased until the rainy season, while the drought size steadily increased and decreased until the rainy season. The regional magnitude of the drought was large in Gyeonggi-do and Gyeongsang-do, and in winter, severe drought occurred in areas of Gangwon-do. As a result of comparative analysis with actual drought events, it was confirmed that there is a high correlation with SPI by each time scale drought events with a correlation coefficient.

• Smart Structures and Systems
• /
• 제23권6호
• /
• pp.695-702
• /
• 2019

The number of cable-stayed bridges has been increasing worldwide, causing issues in maintaining the structural safety and integrity of bridges. The stay cable, one of the most critical members in cable-stayed bridges, is vulnerable to wind-induced vibrations owing to its inherent low damping capacity. Thus, vibration mitigation of stay cables has been an important issue both in academia and practice. While a semi-active control scheme shows effective vibration reduction compared to a passive control scheme, real-world applications are quite limited because it requires complicated equipment, including for data acquisition, and power supply. This study aims to develop an Arduino-based integrated cable vibration control system implementing a semi-active control algorithm. The integrated control system is built on the low-cost, low-power Arduino platform, embedding a semi-active control algorithm. A MEMS accelerometer is installed in the platform to conduct a state feedback for the semi-active control. The Linear Quadratic Gaussian control is applied to estimate a cable state and obtain a control gain, and the clipped optimal algorithm is implemented to control the damping device. This study selects the magnetorheological damper as a semi-active damping device, controlled by the proposed control system. The developed integrated system is applied to a laboratory size cable with a series of experimental studies for identifying the effect of the system on cable vibration reduction. The semi-active control embedded in the integrated system is compared with free and passive mode cases and is shown to reduce the vibration of stay-cables effectively.

• Nuclear Engineering and Technology
• /
• 제53권2호
• /
• pp.657-665
• /
• 2021

Nondestructive evaluation methods play an important role in ensuring component integrity and safety in many industries. Operator fatigue can play a critical role in the reliability of such methods. This is important for inspecting high value assets or assets with a high consequence of failure, such as aerospace and nuclear components. Recent advances in convolution neural networks can support and automate these inspection efforts. This paper proposes using residual neural networks (ResNets) for real-time detection of corrosion, including iron oxide discoloration, pitting and stress corrosion cracking, in dry storage stainless steel canisters housing used nuclear fuel. The proposed approach crops nuclear canister images into smaller tiles, trains a ResNet on these tiles, and classifies images as corroded or intact using the per-image count of tiles predicted as corroded by the ResNet. The results demonstrate that such a deep learning approach allows to detect the locus of corrosion via smaller tiles, and at the same time to infer with high accuracy whether an image comes from a corroded canister. Thereby, the proposed approach holds promise to automate and speed up nuclear fuel canister inspections, to minimize inspection costs, and to partially replace human-conducted onsite inspections, thus reducing radiation doses to personnel.