• 한국건설관리학회논문집
• /
• 제8권3호
• /
• pp.134-141
• /
• 2007

건축공사에서 종사하는 기능인력의 근골격계질환은 직업병으로서 매우 심각하다 이와 같은 질환은 반복되거나 불편한 작업자세 및 방법에 기인한 것으로서 본 연구의 목적은 건축공사의 대표직종인 목공과 철근공을 대상으로 수작업 부하를 측정하여 부하정도를 분석하고자 한다. 또한 부하정도를 평가하기 위하여 건강한 대학원생을 대상으로 동일한 작업자세에서의 부하정도를 측정하는 실험을 실시한다. 본 연구의 결과는 근골격계부담작업의 개선을 위한 작업형태 및 작업자세의 개선, 사용하는 수공구의 인간공학적 기술 개선을 위한 매우 소중한 기초자료로 활용될 수 있다.

• 한국건축시공학회지
• /
• 제7권3호
• /
• pp.115-122
• /
• 2007

As buildings become higher, larger, and more complex, safety issues for construction workers working at such environments become more important. We analyzed 83 critical accident cases reported to the KOSHA(Korea Occupational Safety & Health Agency) for construction cranes by types of cranes and by patterns of accidents and causes. There are more number of accidents related to mobile cranes than that related to tower cranes, but the numbers of dead were similar in both cases. The most dominant cause of crane accidents was "fall of materials". We also analyzed the cases of crane accidents using the FMEA(Failure Mode and Effect Analysis) in order to set up a priority for safety management and also to prioritize research and development items relating tower cranes. In the process, we tried to eliminate subjective indexes such as an expert group survey and use objective and quantitative indexes. As a result, it was found that critical crane accidents occurs most during the "lifting and translating" activity.

• 한국건설안전학회 논문집
• /
• 제5권1호
• /
• pp.25-30
• /
• 2023

2022년 1월 27일부터 시행된 중대재해처벌법은 안전조치를 소홀히 한 사업주나 관리자를 중대재해 발생 시 1년 이상의 징역형에 처하도록 하고 있다. 이 중대재해의 처벌에 관한 법률이 올해부터 시행되면서 사회의 많은 관심을 받고 있다. 전문가들에 따르면 안전사고율을 낮추는 법안의 당초 취지와 달리 기업에 대한 처벌을 높이는 데 초점을 맞춰 법안을 만들었다는 의견이 대부분이다. 본 연구는 사례연구를 통해 이러한 내용이 사실인지를 확인하였으며, 이를 지속할 경우 기업과 근로자 간의 갈등이 심화되어 안전사고율이 감소하지 않을 것이다. 따라서 본 연구는 기업의 처벌을 무조건 늘리는 것이 아니라 설문조사를 통해 많은 상황을 비교하고 기업과 근로자가 안전사고율을 낮추기 위해 중대재해처벌법에 협력할 수 있는 방안을 제시하였다. 본 연구는 안전한 사회 건설을 위한 발전된 중대재해 처벌 법의 제정을 위한 기초자료로 활용될 것으로 사료된다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1458-1462
• /
• 2003

High temperature and high pressure heavy water flows through the pipes in atomic power plants. The curved parts of pipes are critical parts in that they change the direction of steam flow, and these parts are especially affected by severe wear. Therefore, most pipes in atomic power plants are tested by non-destructive examination by workers who use ultrasonic sensors to measure the wall thickness of pipes. But not only are these pipes located in a very dangerous environment, but the space is also very limited. For the safety of workers, it is necessary to design a device that uses a mobile robot that can inspect curved pipes. This paper presents the design and construction of a small device that can generate the necessary contact forces between ultrasonic sensors and pipe walls in a limited space. And a mobile robot is used in place ortho worker for successful non-destructive examination.

• Safety and Health at Work
• /
• 제8권3호
• /
• pp.267-275
• /
• 2017

Background: The mining industry is known worldwide for its highly risky and hazardous working environment. Technological advancement in ore extraction techniques for proliferation of production levels has caused further concern for safety in this industry. Research so far in the area of safety has revealed that the majority of incidents in hazardous industry take place because of human error, the control of which would enhance safety levels in working sites to a considerable extent. Methods: The present work focuses upon the analysis of human factors such as unsafe acts, preconditions for unsafe acts, unsafe leadership, and organizational influences. A modified human factor analysis and classification system (HFACS) was adopted and an accident predictive fuzzy reasoning approach (FRA)-based system was developed to predict the likelihood of accidents for manganese mines in India, using analysis of factors such as age, experience of worker, shift of work, etc. Results: The outcome of the analysis indicated that skill-based errors are most critical and require immediate attention for mitigation. The FRA-based accident prediction system developed gives an outcome as an indicative risk score associated with the identified accident-prone situation, based upon which a suitable plan for mitigation can be developed. Conclusion: Unsafe acts of the worker are the most critical human factors identified to be controlled on priority basis. A significant association of factors (namely age, experience of the worker, and shift of work) with unsafe acts performed by the operator is identified based upon which the FRA-based accident prediction model is proposed.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.40-41
• /
• 2021

The construction industry has the highest occupational accidents/injuries among all industries. Korean government installed surveillance camera systems at construction sites to reduce occupational accident rates. Construction safety managers are monitoring potential hazards at the sites through surveillance system; however, the human capability of monitoring surveillance system with their own eyes has critical issues. Therefore, this study proposed to build a deep learning-based safety monitoring system that can obtain information on the recognition, location, identification of workers and heavy equipment in the construction sites by applying multiple-object tracking with instance segmentation. To evaluate the system's performance, we utilized the MS COCO and MOT challenge metrics. These results present that it is optimal for efficiently automating monitoring surveillance system task at construction sites.

• Safety and Health at Work
• /
• 제12권3호
• /
• pp.304-310
• /
• 2021

Background: Healthcare settings have been recognized among the most hazardous places to work. Based on the five categories of occupational hazards that were identified by the ILO and WHO, this study aimed to analyze policy framework relevant to occupational health protection of health workers (HWs) in public health service in China, then discussed how to share the experience of the National Health Service (NHS) England for improvement. Methods: Based on policy learning theories, policy analysis and qualitative interview were used in this study. Results: In the Chinese public health service, at least five laws related to the regulation of occupational health protection for HWs; however, enforcement of relevant laws was separated and multi-centered; the national monitoring system, which targeted to occupational hazards and health outcome for HWs in China, had yet to be developed; the top three priorities were workplace violence, bloodborne pathogens, and musculoskeletal disorders; national strategies included Security Hospital, and Healthy China 2030. In NHS England, three laws were fundamental; several monitoring systems had been set up, including NHS Staff Survey, Commissioning for Quality and Innovation incentive scheme; mental health, musculoskeletal problem, and nutrition disorder and overweight were raised great concern; Health and Safety, and NHS Healthy Workforce Program were critical nationwide strategies. Conclusion: There were several similarities as well as differences between the Chinese public health system and NHS England, which laid foundation of learning by China. Recommendations of improving occupational health policies in China were provided, based on the lessons learned from the NHS England.

• Safety and Health at Work
• /
• 제6권2호
• /
• pp.146-150
• /
• 2015

Occupational health and safety (OHS) is a broad field of professional practice, which involves specialists from different disciplines including but not limited to engineers, occupational health physicians, physical and biological scientists, economists, and statisticians. The preventive systems required to ensure workers are protected from injuries and illnesses dwell heavily on engineers; however, the extent to which the engineer can go regarding planning and implementing preventive measures is dependent on specific legal requirements, leadership commitment from the company, organization, and nation. The objective of this paper is to identify the areas of opportunities for improvements in OHS management in Ghana with regard to the nation's legal requirements, commitment of the Ghana government, and Ghanaian leadership as well as appropriate structuring of Ghanaian institutions responsible for monitoring and managing OHS in Ghana. This paper identified Ghana's fragmented legal requirements concerning OHS, which are under different jurisdictions with unclear responsibilities and accountabilities. The paper also highlights the training needs of Ghanaian academic institutions regarding OHS. Among other recommendations made including structuring of Ghanaian institutions to manage OHS in line with the ILO-OSH 2001, this paper aligns the recommendations with the articles and elements of International Labour Organization convention number 155 and OHSAS 18001 elements.

• 한국정밀공학회지
• /
• 제33권5호
• /
• pp.371-376
• /
• 2016

Safety related workers, such as firefighters, have to wear a protective helmet. The Development of Helmets for safety is in progress to promote the wearable device industry. Several accidents caused by negligence in recent days have raised public attention to safety. For this reason, the amount of national budget funding for the study of fire-fighting and smart safety helmets has increased. However, most previous studies have focused on safety, rather than the application of new technologies based on physical attributes, especially the characteristics of head shape and size, even though fire helmets play the critical role of protection from flames and external shocks etc. in an emergency. This paper will present the smart technologies and newly developed designs for safety helmets that are personalized for each firefighter, based on the characteristics of their head, and will help a rescue operation to be much more safe and efficient.

• 한국환경보건학회지
• /
• 제36권6호
• /
• pp.441-455
• /
• 2010

Researchers who work in science and engineering R&D laboratories are commonly exposed to a wide range of chemical, biological and physical hazards. They also may adopt ergonomically poor postures for long periods of time. These factors may increase the risk of adverse health outcomes in laboratory workers. Recently, there were several fatal accidents in the laboratories in universities and research institutes in Korea. Consequently, the 'Laboratory Safety Act' was enacted in 2006. However, there are concerns about the health risk associated with chronic exposures to hazards, as the management measures provided in this Act are very limited, focusing primarily on accident prevention and compensation for lab work-related accidents. In this article, the methods for assessing exposure to chemicals in laboratory environments are discussed. Also, epidemiological studies examining the association between laboratory exposure and health effects, including cancer and reproductive toxicity are extensively reviewed. Finally, the possible roles of environmental health professionals in this area are suggested, along with a list of critical research needs for properly assessing laboratory workers' exposure and risk.