• Tuberculosis and Respiratory Diseases
• /
• v.48 no.2
• /
• pp.236-245
• /
• 2000

Background: Transbronchial lung biopsy(TBLB) has known to yield useful information for pulmonary infiltrates of uncertain etiology, However, its safety and usefulness have not been conclusive in the critically ill patients with respiratory failure. Moreover, TBLB has not been recommended for patients with mechanical ventilation. This study was conducted to investigate the diagnostic values and risks of Will performed on critically ill patients at bedside to obtain information on the pulmonary infiltrate of unknown etiology. Methods: Twenty patients(21 admissions with 23 cases) with diffuse pulmonary infiltrates who were treated in a medical intensive care unit of a tertiary referral hospital from January 1994 to May 1998, were enrolled for the study. Their medical records were retrospectively reviewed. TBLB was opted when a noninvasive diagnostic work-up failed to reveal the cause for the pulmonary infiltrate. The procedure was performed at patients' bedside without assistance of fluoroscopy. Bronchial washing or bronchoalveolar lavage was performed on the same pulmonary segment before performing TBLB. Results: Adequate specimens were obtained in 18 cases(78%). TBLB provided a specific diagnosis in two cases. The results of TBLB suggested the underlying etiology in 9 cases; bacterial pneumonitis(4), hypersensitivity pneumonitis(1), polymyositis(1), radiation fibrosis(1), idiopathic pulmonary fibrosis(1), and BOOP(1). Therapeutic decisions were altered in 11 cases(47.8%) based on the TBLB results. Pneumocystis carinii was found in the BAL fluid of another case. Ten patients with a therapeutic change and ten patients without a management change had mortality rates of 40% and 80%, respectively. The APACHE III scores were significantly higher in patients with complications($72.8{\pm}21.8$) compared with those without complications ($48.3{\pm}18.9$)(p<0.05). The complication rates were higher in those with mechanical ventilation(50%) than in those without Mechanical ventilation(33%), but the difference was not statistically significant(p=0.3). Conclusions: TBLB may be a useful diagnostic option for critically ill patients with unknown cause of pulmonary infiltrates. However, it should be cautious be used with care for patients with mechanical ventilation or for severely ill patients.

• Korean Journal of Poultry Science
• /
• v.35 no.4
• /
• pp.341-350
• /
• 2009

The research work was carried out to study the pathogenesis covering the clinical signs, gross and histopathological lesions in different organs, and reisolation and identification of the organisms after experimental infection with the local isolate of Salmonella enterica serovar. enterica subspecies (S.) Pullorum at different time interval of the experiment during the period February 2006 to December 2006. One hundred pullets (seronegative to S. Pullorum of 12 weeks age were purchased and divided into 5 (A, B, C, D and E) groups and each group consisted of 20 birds. Four groups (A, B, C and D) were infected orally with a dose of $10^6\;CFU$, $10^7\;CFU$, $2{\times}10^7\;CFU$, $10^8\;CFU$ of S. Pullorum, respectively, and one group (E) was treated as uninfected control. The used methods were necropsy and histopathology, culture of bacteria, staining and biochemical test of Salmonella. Five birds from each group were randomly selected and sacrificed $1^{st}$ week, $2^{nd}$, $3^{rd}$ and $4^{th}$ weeks of post infection (PI). From all the groups, the bacteriological samples (crop, liver, lung, heart, spleen, bile duodenum, ceca and blood) were collected with pre enriched in buffered peptone water in sterile poly bags. Liver, lungs, heart, spleen, intestine, etc. were collected in 10% buffered-formalin for histopathological examination. No clinical signs, gross and histopathological lesions were found in control group and no S. Pullorum was reisolated. Clinical sign of experimentally infected with S. Pullorum in pullets were loss of appetite (100%), slight depression (75%), ruffled feathers (85%), diarrhea (60%) and loss of weight (100%) in chickens. The feed intake and body weight at different weeks after PI differed significantly (p<0.01) among the groups. Grossly, the highest recorded lesion was button-like ulcer in the ceca (80%) and the lowest was white nodules in lungs (1.25%). S. Pullorum were reisolated from crop (91.25%), liver (91.25%), lung (83.75%), heart (71.25%), spleen (87.75%), bile (33.25%), duodenum (92.50%), ceca (97.50%) and from different group of infection (61.25%). The highest microscopic findings were intestinal and cecal mucosa and submucosa exhibited infiltration of mononuclear cells and congestion (96.25%), and the lowest finding was nodule formation in the lungs (3.75%). The pattern of the disease production by local isolate of S. Pullorum in Bangladesh is almost similar with other isolates in different countries.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.180-185
• /
• 2003

The increase of traffic over a bridge has been emerged as one of the most severe problems in view of bridge maintenance, since the load effect caused by the vehicle passage over the bridge has brought out a long-term damage to bridge structure, and it is nearly impossible to maintain operational serviceability of bridge to user's satisfactory level without any concern on bridge maintenance at the phase of completion. Moreover, bridge maintenance operation should be performed by regular inspection over the bridge to prevent structural malfunction or unexpected accidents front breaking out by monitoring on cracks or deformations during service. Therefore, technical breakthrough related to this uninterested field of bridge maintenance leading the public to the turning point of recognition is desperately needed. This study has the aim of development on automated inspection system to lower surface of bridge superstructures to replace the conventional system of bridge inspection with the naked eye, where the monitoring staff is directly on board to refractive or other type of maintenance .vehicles, with which it is expected that we can solve the problems essentially where the results of inspection are varied to change with subjective manlier from monitoring staff, increase stabilities in safety during the inspection, and make contribution to construct data base by providing objective and quantitative data and materials through image processing method over data captured by cameras. By this system it is also expected that objective estimation over the right time of maintenance and reinforcement work will lead enormous decrease in maintenance cost.

• Food Science and Preservation
• /
• v.17 no.4
• /
• pp.494-499
• /
• 2010

Pasteurization by radiation was performed to improve the microbiological quality of fresh yam juice. Samples were irradiated at doses of up to 5 kGy and microbiological, physicochemical, and sensory qualities were investigated during storage at 5oC for 8 days. Total aerobic bacterial, coliform bacterial, and yeast and mold counts in pre-irradiation samples were 7.09, 6.91, and 3.42 log CFU/g, respectively. Total aerobic bacterial and coliform counts fell significantly, in a dose-dependent manner, after irradiation, and these organisms were completely eliminated after 1 day of storage when 3 kGy or 5 kGy of radiation was applied. Yeast and molds were eliminated by irradiation at 3 kGy. Irradiation reduced sample viscosity. The $L^*$ value decreased after irradiation, whereas the $b^*$ value rose. Sensory evaluation testing revealed no significant difference between control samples and those irradiated with 1 kGy, except in color and texture, but sensory scores fell when irradiation of 3 kGy or over was employed, except in the taste domain. The results indicate that gamma irradiation with 1 kGy is effective to ensure the microbiological safety of fresh yam juice, without significant alteration in sensory characteristics, although further work should seek to reduce the detrimental effects of irradiation.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.5-5
• /
• 2011

The research and development of hybrid electric vehicle (HEV), plug-in hybrid electric vehicle (PHEV) and electric vehicle (EV) are intensified due to the energy crisis and environmental concerns. In order to meet the challenging requirements of powering HEV, PHEV and EV, the current lithium battery technology needs to be significantly improved in terms of the cost, safety, power and energy density, as well as the calendar and cycle life. One new technology being developed is the utilization of composite cathode by mixing two different types of insertion compounds [e.g., spinel $LiMn_2O_4$ and layered $LiMO_2$ (M=Ni, Co, and Mn)]. Recently, some studies on mixing two different types of cathode materials to make a composite cathode have been reported, which were aimed at reducing cost and improving self-discharge. Numata et al. reported that when stored in a sealed can together with electrolyte at $80^{\circ}C$ for 10 days, the concentrations of both HF and $Mn^{2+}$ were lower in the can containing $LiMn_2O_4$ blended with $LiNi_{0.8}Co_{0.2}O_2$ than that containing $LiMn_2O_4$ only. That reports clearly showed that this blending technique can prevent the decline in capacity caused by cycling or storage at elevated temperatures. However, not much work has been reported on the charge-discharge characteristics and related structural phase transitions for these composite cathodes. In this presentation, we will report our in situ x-ray diffraction studies on this mixed composite cathode material during charge-discharge cycling. The mixed cathodes were incorporated into in situ XRD cells with a Li foil anode, a Celgard separator, and a 1M $LiPF_6$ electrolyte in a 1 : 1 EC : DMC solvent (LP 30 from EM Industries, Inc.). For in situ XRD cell, Mylar windows were used as has been described in detail elsewhere. All of these in situ XRD spectra were collected on beam line X18A at National Synchrotron Light Source (NSLS) at Brookhaven National Laboratory using two different detectors. One is a conventional scintillation detector with data collection at 0.02 degree in two theta angle for each step. The other is a wide angle position sensitive detector (PSD). The wavelengths used were 1.1950 ${\AA}$ for the scintillation detector and 0.9999 A for the PSD. The newly installed PSD at beam line X18A of NSLS can collect XRD patterns as short as a few minutes covering $90^{\circ}$ of two theta angles simultaneously with good signal to noise ratio. It significantly reduced the data collection time for each scan, giving us a great advantage in studying the phase transition in real time. The two theta angles of all the XRD spectra presented in this paper have been recalculated and converted to corresponding angles for ${\lambda}=1.54\;{\AA}$, which is the wavelength of conventional x-ray tube source with Cu-$k{\alpha}$ radiation, for easy comparison with data in other literatures. The structural changes of the composite cathode made by mixing spinel $LiMn_2O_4$ and layered $Li-Ni_{1/3}Co_{1/3}Mn_{1/3}O_2$ in 1 : 1 wt% in both Li-half and Li-ion cells during charge/discharge are studied by in situ XRD. During the first charge up to ~5.2 V vs. $Li/Li^+$, the in situ XRD spectra for the composite cathode in the Li-half cell track the structural changes of each component. At the early stage of charge, the lithium extraction takes place in the $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ component only. When the cell voltage reaches at ~4.0 V vs. $Li/Li^+$, lithium extraction from the spinel $LiMn_2O_4$ component starts and becomes the major contributor for the cell capacity due to the higher rate capability of $LiMn_2O_4$. When the voltage passed 4.3 V, the major structural changes are from the $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ component, while the $LiMn_2O_4$ component is almost unchanged. In the Li-ion cell using a MCMB anode and a composite cathode cycled between 2.5 V and 4.2 V, the structural changes are dominated by the spinel $LiMn_2O_4$ component, with much less changes in the layered $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ component, comparing with the Li-half cell results. These results give us valuable information about the structural changes relating to the contributions of each individual component to the cell capacity at certain charge/discharge state, which are helpful in designing and optimizing the composite cathode using spinel- and layered-type materials for Li-ion battery research. More detailed discussion will be presented at the meeting.

• Korean Journal of Occupational Health Nursing
• /
• v.11 no.1
• /
• pp.13-30
• /
• 2002

Industrial shift workers feels suffer mental stresses which are caused by unfamiliar day sleep, noisy environment, sleeping disorder by bright light, unusual contacts with family, difficulty in meeting with friends or having formal social meetings and other social limitations such as the use of transportation. Such stresses influence health of the workers negatively. Thus the health promotion policy for shift workers should be made considering the workers' ways of living and shift work specially. This study attempted to provide basic information for development of the health promotion program for industrial shift workers by examining predictive factors influencing health promotion behaviors of those workers. In designing the study, three power generation plants located in Pusan and south Kyungsang province were randomly selected and therefrom 280 workers at central control, boiler and turbine rooms and environmental chemistry parts whose processes require shift works were sampled as subjects of the study. Data were collected two times from September 17 to October 8, 1999 using questionnaires with helps of safety and health managers of the plants. The questionnaires were distributed through mails or direct visits. Means for the study included the measurement tool of health promotion behavior provided by Park(1995), the tool of self-efficacy measurement by Suh(1995), the tool of internal locus of control measurement by Oh(1987), the measurement tool of perceived health state by Park(1995) and the tool of social support measurement by Paek(1995). The collected data were analyzed using SPSS program. Controlling factors of the subjects were evaluated in terms of frequency and percentage ratio Perceived factors and health promotion behaviors of the subjects were done so in terms of mean and standard deviation, and average mark and standard deviation, respectively. Relations between controlling and perceived factors were analyzed using t-test and ANOVA and those between perceived factors and the performance of health promotion behaviors, using Pearson's Correlation Coefficient. The performance of health promotion behaviors was tested using t-test, ANOVA and post multi-comparison (Scheffe test). Predictive factors of health promotion behavior were examined through the Stepwise Multiple Regression Analysis. Results of the study are summarized as follows. 1. The performance of health promotion behaviors by the subjects was evaluated as having the value of mean, $161.27{\pm}26.73$ points(min.:60, max.:240) and average mark, $2.68{\pm}0.44$ points(min.:1, max.:4). When the performance was analyzed according to related aspects, it showed the highest level in harmonious relation with average mark, $3.15{\pm}.56$ points, followed by hygienic life($3.03{\pm}.55$), self-realization ($2.84{\pm}.55$), emotional support($2.73{\pm}.61$), regular meals($2.71{\pm}.76$), self-control($2.62{\pm}.63$), health diet($2.62{\pm}.56$), rest and sleep($2.60{\pm}.59$), exercise and activity($2.53{\pm}.57$), diet control($2.52{\pm}.56$) and special health management($2.06{\pm}.65$). 2. In relations between perceived factors of the subjects(self-efficacy, internal locus of control, perceived health state) and the performance of health promotion behaviors, the performance was found having significantly pure relations with self-efficacy (r=.524, P=.000), internal locus of control (r=.225, P=.000) and perceived health state(r=.244, P=.000). The higher each evaluated point of the three factors was, the higher the performance was in level. 3. When relations between the controlling factors(demography-based social, health-related, job-related and human relations characteristics) and the performance of health promotion behaviors were analyzed, the performance showed significant differences according to marital status (t=2.09, P= .03), religion(F=3.93, P= .00) and participation in religious activities (F=8.10, P= .00) out of demography-based characteristics, medical examination results (F=7.20, P= .00) and methods of the collection of health knowledge and information(F=3.41, P= .01) and methods of desired health education(F=3.41, P= .01) out of health-related characteristics, detrimental factors perception(F=4.49, P= .01) and job satisfaction(F=8.41, P= .00) out of job-related characteristics and social support(F=14.69, P= .00) out of human relations characteristics. 4. The factor which is a variable predicting best the performance of health promotion behaviors by the subjects was the self-efficacy accounting for 27.4% of the prediction, followed by participation in religious activities, social support, job satisfaction, received health state and internal locus of control in order all of which totally account for 41.0%. In conclusion, the predictive factor which most influence the performance of health promotion behaviors by shift workers was self-efficacy. To promote the sense, therefore, it is necessary to develop the nursing intervention program considering predictive factors as variables identified in this study. Further industrial nurses should play their roles actively to help shift workers increase their capability of self-management of health.

• KDI Journal of Economic Policy
• /
• v.30 no.1
• /
• pp.71-130
• /
• 2008

Using data from the Korean Labor & Income Panel Study (KLIPS), this study investigates private income transfers in Korea, where adult children have undertaken the most responsibility of supporting their elderly parents without well-established social safety net for the elderly. According to the KLIPS data, three out of five households provided some type of support for their aged parents and two out of five households of the elderly received financial support from their adult children on a regular base. However, the private income transfers in Korea are not enough to alleviate the impact of the fall in the earned income of those who retired and are approaching an age of needing financial assistance from external source. The monthly income of those at least the age of 75, even with the earning of their spouses, is below the staggering amount of 450,000 won, which indicates that the elderly in Korea are at high risk of poverty. In order to analyze microeconomic factors affecting the private income transfers to the elderly parents, the following three samples extracted from the KLIPS data are used: a sample of respondents of age 50 or older with detailed information on their financial status; a five-year household panel sample in which their unobserved family-specific and time-invariant characteristics can be controlled by the fixed-effects model; and a sample of the younger split-off household in which characteristics of both the elderly household and their adult children household can be controlled simultaneously. The results of estimating private income transfer models using these samples can be summarized as follows. First, the dominant motive lies on the children-to-parent altruistic relationship. Additionally, another is based on exchange motive, which is paid to the elderly parents who take care of their grandchildren. Second, the amount of private income transfers has negative correlation with the income of the elderly parents, while being positively correlated with the income of the adult children. However, its income elasticity is not that high. Third, the amount of private income transfers shows a pattern of reaching the highest level when the elderly parents are in the age of 75 years old, following a decreasing pattern thereafter. Fourth, public assistance, such as the National Basic Livelihood Security benefit, appears to crowd out private transfers. Private transfers have fared better than public transfers in alleviating elderly poverty, but the role of public transfers has been increasing rapidly since the welfare expansion after the financial crisis in the late 1990s, so that one of four elderly people depends on public transfers as their main income source in 2003. As of the same year, however, there existed and occupied 12% of the elderly households those who seemed eligible for the National Basic Livelihood benefit but did not receive any public assistance. To remove elderly poverty, government may need to improve welfare delivery system as well as to increase welfare budget for the poor. In the face of persistent elderly poverty and increasing demand for public support for the elderly, which will lead to increasing government debt, welfare policy needs targeting toward the neediest rather than expanding universal benefits that have less effect of income redistribution and heavier cost. Identifying every disadvantaged elderly in dire need for economic support and providing them with the basic livelihood security would be the most important and imminent responsibility that we all should assume to prepare for the growing aged population, and this also should accompany measures to utilize the elderly workforce with enough capability and strong will to work.

• The Korean Journal of Air & Space Law and Policy
• /
• v.20 no.2
• /
• pp.59-158
• /
• 2005

When a military aircraft suffers damages due to the defects in its design, manufacturing or notification, all of which are generally understood as products liability defects, the obvious compensation is sought as it would in other consumer good case. However, there exist clear yet unappreciated difference between general consumer goods and military aircraft, as far as products liability law is concerned - some sort of recovery should be obtained even when there exist only defects, not damages, to the aircraft because of the implication of defective parts is much grave than what can be expected in a consumer goods case. While certain anticipatory measures do exist in manual or at negotiation stages for the safety of military aircraft, such measures are ineffective, if not ambiguous, in recovery effort in the post-accident stage In another word, the standardized military procurement contract manuals and boilerplate forms do not appreciate the unique and dangerous military nature of military aircraft. There are many unique legal issues which can arise when trying to prevent defective aircraft or parts, or to recover compensations for accident due to such defects. At two-level, the government should establish legal system (or countermeasures if you'd like) for purchasing safer military aircraft. First, one should be able to work with legal ground and policy that allows selecting and purchasing safer goods - the purpose of such contract is not litigious, but rather in acquiring what are most reliable. Second, in case the defects do arise and lead to damages, solid legal principles and instructions should be established for effectively pursuing appropriate company, (usually a aerospace industry giant with much experience) for products liability - the purpose of such pursuit is inevitable for a public official, since he or she is no private business man with much flexibilities, even to the point of waiving such compensatory right for future business purposes. This article tries to identify problems in methods of procuring military aircraft or parts - after reviewing on how the military can improve on legal and policy grounds for procuring what will be the focus of future military strength, it will offer some of the ways to effectively handling and resolving a liability issues.

• Journal of the Ergonomics Society of Korea
• /
• v.36 no.3
• /
• pp.183-196
• /
• 2017

Objective: The purpose of this research was to assess the agreement between job physical risk factor analysis by ergonomists using ergonomic methods and physical examinations made by occupational physicians on the presence of musculoskeletal disorders of the upper extremities. Background: Ergonomics is the systematic application of principles concerned with the design of devices and working conditions for enhancing human capabilities and optimizing working and living conditions. Proper ergonomic design is necessary to prevent injuries and physical and emotional stress. The major types of ergonomic injuries and incidents are cumulative trauma disorders (CTDs), acute strains, sprains, and system failures. Minimization of use of excessive force and awkward postures can help to prevent such injuries Method: Initial data were collected as part of a larger study by the University of Utah Ergonomics and Safety program field data collection teams and medical data collection teams from the Rocky Mountain Center for Occupational and Environmental Health (RMCOEH). Subjects included 173 male and female workers, 83 at Beehive Clothing (a clothing plant), 74 at Autoliv (a plant making air bags for vehicles), and 16 at Deseret Meat (a meat-processing plant). Posture and effort levels were analyzed using a software program developed at the University of Utah (Utah Ergonomic Analysis Tool). The Ergonomic Epicondylitis Model (EEM) was developed to assess the risk of epicondylitis from observable job physical factors. The model considers five job risk factors: (1) intensity of exertion, (2) forearm rotation, (3) wrist posture, (4) elbow compression, and (5) speed of work. Qualitative ratings of these physical factors were determined during video analysis. Personal variables were also investigated to study their relationship with epicondylitis. Logistic regression models were used to determine the association between risk factors and symptoms of epicondyle pain. Results: Results of this study indicate that gender, smoking status, and BMI do have an effect on the risk of epicondylitis but there is not a statistically significant relationship between EEM and epicondylitis. Conclusion: This research studied the relationship between an Ergonomic Epicondylitis Model (EEM) and the occurrence of epicondylitis. The model was not predictive for epicondylitis. However, it is clear that epicondylitis was associated with some individual risk factors such as smoking status, gender, and BMI. Based on the results, future research may discover risk factors that seem to increase the risk of epicondylitis. Application: Although this research used a combination of questionnaire, ergonomic job analysis, and medical job analysis to specifically verify risk factors related to epicondylitis, there are limitations. This research did not have a very large sample size because only 173 subjects were available for this study. Also, it was conducted in only 3 facilities, a plant making air bags for vehicles, a meat-processing plant, and a clothing plant in Utah. If working conditions in other kinds of facilities are considered, results may improve. Therefore, future research should perform analysis with additional subjects in different kinds of facilities. Repetition and duration of a task were not considered as risk factors in this research. These two factors could be associated with epicondylitis so it could be important to include these factors in future research. Psychosocial data and workplace conditions (e.g., low temperature) were also noted during data collection, and could be used to further study the prevalence of epicondylitis. Univariate analysis methods could be used for each variable of EEM. This research was performed using multivariate analysis. Therefore, it was difficult to recognize the different effect of each variable. Basically, the difference between univariate and multivariate analysis is that univariate analysis deals with one predictor variable at a time, whereas multivariate analysis deals with multiple predictor variables combined in a predetermined manner. The univariate analysis could show how each variable is associated with epicondyle pain. This may allow more appropriate weighting factors to be determined and therefore improve the performance of the EEM.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.16 no.2
• /
• pp.81-86
• /
• 2012

Purpose : Combined MR/PET scanners that use the MRI for PET AC face the challenge of absent surface coils in MR images and thus cannot directly account for attenuation in the coils. To make up for the weak point of MR attenuation correction, Three Modality System (PET/CT +MR) were used in Severance hospital. The goal of this work was to investigate the effects of MR Torso Coil on CT attenuation correction for PET. Materials and Methods : PET artifacts were evaluated when the MR Torso Coil was present of CTAC data with changing various kV and mA in uniformity water phantom and 1994 NEMA cylinderical phantom. They evaluated and compared the following two scenarios: (1) The uniform cylinder phantom and the MR Torso Coil scanned and reconstructed using CT-AC; (2) 1994 NEMA cylinderical phantom and the MR Torso Coil scanned and reconstructed using CT-AC. Results : Streak artifacts were present in CT images containing the MR Torso Coil due to metal components. These artifacts persisted after the CT images were converted for PET-AC. CT scans tended to over-estimate the linear attenuation coefficient when the kV and mA is increasing of the metal components when using conventional methods for converting from CT number. Conclusion : The presence of MR coils during PET/CT scanning can cause subtle artifacts and potentially important quantification errors. Alternative CT techniques that mitigate artifacts should be used to improve AC accuracy. When possible, removing segments of an MR coil prior to the PET/CT exam is recommended. Further, MR coils could be redesigned to reduce artifacts by rearranging placement of the most attenuating materials.