• 대한인간공학회지
• /
• 제30권4호
• /
• pp.541-550
• /
• 2011

Objective: The objective of this study is to present varying cases of ergonomic improvements in equipments for agricultural work. Background: In Korean agricultural sector, many older people and females, who may be more vulnerable to musculoskeletal diseases than young males, are doing high stressful tasks such as manual materials tasks, harvesting, etc. For reducing the work stress of the farmers, the Korean government has been performing support projects to provide the farmers with agricultural implements specified for their crops. In the projects, ergonomics experts have participated and helped modify the equipments. Method: Fifty cases of equipment improvements, which were carried out in 33 farming organizations cultivating 13 different crops, were reviewed and presented by equipments and their parts. Results: In total, 283 cases of improvements for 12 equipments including 4-wheel, 1-wheel, and 3-wheel powered carts, grass cutter, conveyer, pest control machine, and so on, were presented. The improvements were also classified according to the ergonomic principles like compatibility, ease of use, safety and fitting to the anthropometry, etc. Frequencies of improvements by equipment and its part were the highest in carts and controls, respectively. Principles of safety and ease of use were adopted more frequently in improving equipments than others. Conclusion: The tables of examples of improvements of agricultural implements are main results of this study and the systematical summaries are expected to be widely used in the development of more improved agricultural implements. Application: The results could be used as practical guidelines in ergonomically developing and modifying agricultural implements by both the experts and non-experts in ergonomics. The improvements would contribute to reduction of stress in farm work, which result in increasing the level of safety and health of Korean agricultural society.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 춘계학술대회 논문집
• /
• pp.809-810
• /
• 2007

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2000년도 춘계학술대회 논문집
• /
• pp.210-217
• /
• 2000

This paper estimates the derailment factor of running train on the curved track. To estimate the derailment factor, wheel loads and lateral forces of train are measured on the track. The selected measuring points are the 400R and the 600R in the Honam line, the 300R and the 400R in the Janghang line, respectively. The derailment factors are evaluated from the wheel loads and lateral forces which are measured on the all axles of running trains.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1998년도 추계학술대회 논문집
• /
• pp.595-600
• /
• 1998

Train wheels tend to wear abrasion due to frequent Starlings and brakings. They are important factors of train safety and noise. However, it is difficult and inaccurate to measure their shape and profile manually. Profile measurement system of train wheel with image processing is proposed. The system consists of CCD cameras, PCI image grabber board, and PC operated on Windows '95. Image processing algorithms such as filtering, histogram equalization, and edge detection are presented, and some processing results are illustrated.

• 한국철도학회논문집
• /
• 제8권4호
• /
• pp.354-360
• /
• 2005

The railway track and the substructures constructed in the field test section of Kyongbu High Speed Line are the structures for HSL, for the first time designed and constructed by domestic technical group. It is very important to verify the local design criteria and specifications for these structures and also to assure the recordings for vibration or deflection produced on the essential parts of the structures. The study to verify the high-speed railway track performance and to ensure the run in safety on the track in curved section during the KTX run. Finally, the conclusion are drawn as follows. The measuring values of the deflection effort of the rail and displacement for verifying the track performance in the field test section of Kyoungbu HSL satisfy the criteria of the foreign countries (Japan and Germany). The measured value for the wheel load and the presumed value show the consistent tendency. The wheel loads of the exterior and interior of the rails at the speed superior to 300km/h are measured same. Finally, the comparison between the theoretical value presented during the verification of the derailment to evaluate the safety of the train run at the time of the detailed design of the track and the measured value in the field shows that the correct design of track structure was applied.

• Nuclear Engineering and Technology
• /
• 제42권4호
• /
• pp.377-381
• /
• 2010

In 2007 the Nuclear Energy Agency's Committee on the Safety of Nuclear Installations published Best Practice Guidelines for the use of CFD in Nuclear Reactor Safety. This paper provides an overview of the document' contents and highlights a few of its recommendations. The document covers the full extent of a CFD analysis from initial problem definition and selection of an appropriate tool for the analysis, through final documentation of results. It provides advice on selection of appropriate simulation software, mesh construction, and selection of physical models. In addition it contains extensive discussion of the verification and validation process that should accompany any high-quality CFD analysis.

• 한국소음진동공학회논문집
• /
• 제22권3호
• /
• pp.244-252
• /
• 2012

Recently, the speed of a train has been increased. So the trains are being exposed to wind more severely than before. Because of the operation of high speed trains and lightweight of the train, risks of train derailment have being increased. In this study, aerodynamic effects of a newly designed high speed train, HEMU-400x, are evaluated. For aerodynamic effect evaluation, analysis method is selected by examining the safety standards for high speed train. The condition of aerodynamic effects is selected by adverse effect conditions. In order to calculate $C_s$ coefficients, numerical analysis is conducted. Using $C_s$ coefficients, the side force is calculated. Through dynamics analysis, derailment and wheel unloading are obtained. Using these results, derailment evaluation is performed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 학술대회 논문집 정보 및 제어부문
• /
• pp.318-319
• /
• 2008

In this paper, a steering feel simulator is designed and implemented using a steering wheel with a rotation angle sensor, torque sensor, and an ac motor for the generation of the required torque. The controller in the simulator consists of a 16-bit micro-controller, a D/A converter and A/D converters. The main objective of the controller is to perform torque control where the reference torque is calculated from the torque map for both the vehicle velocity and the wheel sensor cutout. It is shown via the experimentation using the proposed simulator that the simulator output performance can be easily understood for the variation of vehicle parameters or controller parameters.

• 한국정밀공학회지
• /
• 제20권7호
• /
• pp.201-207
• /
• 2003

Sensitivity analysis of suspension elements of an articulated bogie for light railway vehicles is presented. The ride, stability and safety are used as dynamic performance indices. Suspension elements of 10 and a conicity of wheel are used as design variables. To analyze sensitivity of design variables. the railway vehicle dynamics analysis program AGEM is used. The results show that the secondary suspension elements have a strong effect on ride and the primary suspension elements have a moderate effect on ride. Conicity of wheel has a strong effect on the stability. The safety is not effected by all the design variables.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.726-731
• /
• 2004

Bogie is the connection device between carbody and wheel in railway vehicles. It is the core part that exert a important effect on the passenger safety and running safety. Bogie largely consists of bogie frame, suspension, brake, wheel set. Static and Dynamic load have acted on it complexly. When the bogie is designed, finite element method, static load test, fatigue test, running test should be considered. Some bogie frame of high speed railway freight car have the problem. It's end beam was cracked. The crack of the end beam have a bad effect on brake system. In that case, the cars would be in danger of derailment.