• Journal of Korean Society of Transportation
• /
• v.26 no.1
• /
• pp.137-144
• /
• 2008

It is important to know pedestrian volume to carry out pedestrian safety analysis and pedestrian friendly design. However, it is too difficult to come across research work related to pedestrian volume analysis in the field of transport, due to lack of interests on pedestrian movement. Most transport research has been focused on vehicles and highways rather than pedestrian. On the other hand, in the field of urban studies, there comes an effective tool to estimate pedestrian volumes using Space Syntax theory. This theory twins out to be effective and economic because it only requires network information, which is easy to acquire from maps and field survey. However, this method is different in the way representing networks from the way that is common in the field of transport. To make up for this point, this paper develops a novel measure for estimating pedestrian volume using Dial's algorithm, and applies the model in the two test networks; Insadong and Soongryemoon networks. The application results reveals that developed measure is an effective tool to explain pedestrian volume; a correlation coefficient between the measure and pedestrian volume is 0.713 in Insadong and 0.492 in Soongryemoon, and the goodness of fit($R^2$) of regression models are 0.893 in Insadong and 0.671 in Soongryemoon. This estimation method is significantly less complicated to estimate the effect of a pedestrian network change than Space Syntax theory, which requires special softwares not readily available.

• Journal of Korean Society of Transportation
• /
• v.28 no.6
• /
• pp.17-24
• /
• 2010

As various social problems occur due to increasing traffic accidents, the government has setup and executed strong safety policies. As a result, the number of traffic accidents and the death toll have been decreasing in recent years. However, the setup and execution of the various policies for reducing traffic accidents cost much, so it is necessary to evaluate the cost-effectiveness of each policy. In the present study, enforcement by means of an unmanned over-speed enforcement system, the enforcement effect of which was proven good compared to the cost required for traffic enforcement, is compared with enforcement by policemen. As a result of the comparison, the average speed was 82.66 km/h before the use of unmanned systems and policemen; the average speed with manned enforcement was 70.57 km/h; and the average speed with unmanned systems was 67.85 km/h. The speed limit violation rate was 65% before the use of unmanned systems and policemen; 32% with manned enforcement; and 15% with unmanned systems. Considering the kinds of vehicles, the average speed and violation rate were highest among private cars, then vans, and then trucks.. Considering lanes. The accident rate was estimated based on the above results, and the input cost-to-advantage was estimated. The annual cost-to-advantage was estimated by comparing the above estimated values with the conditions before the unmanned over-speed enforcement system. Subsequently, the enforcement by policemen showed a negative advantage of 76,130,590 won, and the enforcement by the unmanned system showed a positive advantage of 38,577,670 won.

• Journal of Chest Surgery
• /
• v.42 no.3
• /
• pp.401-403
• /
• 2009

We performed nerve resection and reconstruction of the phrenic nerve in a 63-year-old female patient who underwent complete resection of a malignant thymoma. The left phrenic nerve was completely encased by the tumor for 2 cm. Thus, a 3 cm long piece of phrenic nerve with 5 mm margins of safety on each end was resected and it was directly anastomosed in an end-to-end fashion. At 11 months after reconstruction, fluoroscopy demonstrated adequate and symmetric motion of both hemidiaphragms, which indicated the restoration of phrenic nerve function. The pulmonary function test results were comparable to those obtained preoperatively at 30 months. There has been no evidence of recurrence at the recent follow up visits.

• Journal of Korea Water Resources Association
• /
• v.45 no.10
• /
• pp.1023-1034
• /
• 2012

Linear regression technique has been used widely in water resources field as well as various fields such as economics and statistics, and so on. Using fuzzy regression technique, it is possible to quantify uncertainty and reflect them to the regression model. In this study, fuzzy regression model is developed to compute design floods in any place in Pyeongchang River basin. In ungaged basins, it is usually difficult to obtain data required for flood discharge analysis. In this study, basin characteristics elements are analyzed spatially using GIS and the technique of estimating design flood in ungaged mountainous basin is studied based on the result. Fuzzy regression technique is applied to Pyeongchang River basin which has mountainous basin characteristics and well collected rainfall and runoff data through IHP test basin project. Fuzzy design flood estimation equations are developed using the basin characteristics elements for Pyeongchang River basin. The suitability of developed fuzzy equations are examined by comparing the results with design floods computed in 9 locations along the river. Using regional regression method and fuzzy regression analysis, the uncertainties of the design floods occurred from the data monitoring can be quantified.

• The Korean Journal of Mycology
• /
• v.47 no.4
• /
• pp.393-406
• /
• 2019

In August 2017, anthracnose symptoms were observed on the petioles and leaf veins of Korean radish (Rhaphanus sativus) in Hongcheon, Jeongseon, and Pyeongchang of the Gangwon province, Korea. Many grayish to dark-brown spots of 1-2 mm in diameter, appeared on the lower surface and leaf veins of the radish leaves. The spots gradually enlarged and coalesced to form dark-brown irregular lesions. Ten Colletotrichum isolates were obtained from the affected tissues of the Korean radish. Out of them, eight isolates were identified as C. higginsianum and two isolates were identified as C. truncatum based on morphological characteristics and multi-locus molecular phylogenetic analysis using the internal transcribed spacers and intervening 5.8S rDNA (ITS), partial beta-tubulin gene (TUB2), partial actin gene (ACT), and partial chitin synthase-1 gene (CHS1). The pathogenicity test was carried out on wounded and unwounded Korean radish (cv. Siraegimu and Osarimu), and Chinese cabbage (cv. Chuno and Smart) by inoculating with a spore suspension. All isolates except one C. truncatum isolate developed typical symptoms on both wounded and unwounded Korean radish. In Chinese cabbage, only the plants inoculated with C. higginsianum isolates developed symptoms regardless of the wound. This is the first report of anthracnose caused by C. truncatum on Korean radish in Korea.

• Journal of Nutrition and Health
• /
• v.18 no.4
• /
• pp.283-292
• /
• 1985

A sanitary quality of a university foodservice establishment was assessed in terms of time and temperature, pH and Aw, and microbiological evaluation. Critical control points during various phases in product flow of fried fish cake soup were identified using hazard analysis concept. The results are summarized as follows : 1) Time and temperature data indicated that phases of holding ingredients at room temperature after cooking, and hot - holding of soup before assembly were critical. 2) pH and Aw values were in favorable for microbial growth. 3) Microbiological data indicated that microbial quality of ingredients was in poor condition. A holding practice of cooked ingredients at room temperature might provide the chance for microbial contamination and multiplication. Hot - holding time and temperature of soup should be strictly controlled to assure the food safety, since the microbial quality of serving food can be directly influenced by the hot - holding temperature of soup. 4) Microbiological test results for food containers, equipments, working surfaces, and supplies indicated that sanitary conditions of earthenware, gloves, wiping cloths and cutting board should be improved promptly. 5) Critical control points identified were : ingredients, pre - preparation, post - preparation, and holding before assembly and service. 6) Guidelines for the effective quality control program for this operation were suggested.

• International Commerce and Information Review
• /
• v.13 no.3
• /
• pp.377-401
• /
• 2011

Under the WTO system, direct export support system that provides financial and tax related support is altogether prohibited. This presented an obstacle in strengthening competitiveness of Korean export business and in increasing exports continuously. One of the methods used to solve this problem was to actively leverage export insurance. In Korea, export insurance services have been conducted by the Korea Trade Insurance Corporation (k-sure) to promote export. Korea has been among the world's active users of the export insurance system. Given this situation, this paper examines the effectiveness of the Korea export insurance system in the promotion of export. In particular, this study analyzed about discriminating effects of the export insurance on the export of big and small-medium business. In order to analyze, We introduce a Export Supply Function model. In this paper, We construct two model. The one is about big business, the other is small-medium business. For empirical analysis, unit-root test was conducted to understand the safety of time series. The results show that all variables are not I(0) time series. Instead, they are I(1) time series. To this, cointegration verification was conducted based on the use of Johansen verification method to define the existence (or non-existence) of long-term balance relationship among variables. The results come out as follows. The export insurance of big business has a stronger effect on export than that of small-medium business. The cause of these results is due to the distinct structure of Korea industries. In view of the fact that the insurance can make the risk decreased. We can say that the export insurance affects the export of a high-risk country.

• Journal of the Korean Arthroscopy Society
• /
• v.9 no.2
• /
• pp.180-185
• /
• 2005

Purpose: To purpose of this study is to evaluate the clinical and radiological results of arthroscopic meniscus repair using Rapid Loc device. Materials and Methods: A retrospective study was performed on 44 cases which had been turned out longitudinal tear without degeneration. We repaired all cases with Rapid Loc device. Patients were evaluated using clinical examination, Orthopaedische Arbeitsgemeinschaft Knie (OAK) scheme, and MRI. We regarded patients with joint line tenderness, swelling or McMurray positive test as clinical failure. Results: A mean age was 33.3 years and follow-up period was average 15 months. Clinical results were excellent 15 cases(34.1%), good 20 cases(45.5%), fair 7 cases(15.9%), poor 2 cases(4.5%). MRI showed grade 115 cases(33.3%), grade II 22 cases(50%), grade III 7 cases(16.7%). Clinical failures were 8 cases and only one complication was developed. Conclusion: Rapid Loc device showed the excellent results in meniscus repair. We regard it has a lot of advantages in safety, softness, ease, ability to control tension at repair site.

• 대한공업교육학회지
• /
• v.34 no.2
• /
• pp.230-247
• /
• 2009

This study was performed to investigate and analyze technology teachers' and other subject teachers' satisfactions with motivation-hygiene factors in order to provide informations for their job motivation at secondary schools. The data were collected from 216 technology teachers and other subject teachers in Gwangju City and Chon-nam Province and analyzed and tested at p<.05 or more by employing t-test through SPSS program. The average satisfaction levels of the teachers were M = 3.85 with compounded motivation factors and M = 3.38 with compounded hygiene factors. The former is higher the latter. In the satisfaction levels of individual factors responsibility was first, work itself second, achievement third, and human relation, job safety, growth opportunity, recognition, supervision skill subsequently went down. The satisfaction levels of these factors were higher than neutral(M = 3.00). On the other hand, the satisfaction levels of work environment and payment were a little lower than neutral. Technology teachers were more satisfied than other subject teachers with responsibility and human relation factors among 10 motivation and hygiene factors. They had more positive perception than the others with these two. Generally, these teachers groups presented almost the equal satisfaction level with motivation and hygiene factors. The data were collected from technology teachers and other subject teachers in Gwangju City and Chon-nam Province and thus these might not be applicable to teachers in other cities and provinces.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.53-60
• /
• 2020

The bogies of railway vehicles are one of the most critical components for service. Fatigue defects in the bogie can be initiated for various reasons, such as material imperfection, welding defects, and unpredictable and excessive overloads during operation. To prevent the derailment of a railway vehicle, it is necessary to evaluate and detect the defect of a connection weldment between the car body and bogie accurately. The safety of the bogie weldment was checked using an ultrasonic test, and it is necessary to determine the occurrence of defects using a learning method. Recently, studies on deep learning have been performed to identify defects with a high recognition rate with respect to a fine and similar defect. In this paper, the databases of weldment specimens with artificial defects were constructed to detect the defect of a bogie weldment. The ultrasonic inspection using the wedge angle was performed to understand the detection ability of fatigue cracks. In addition, the convolutional neural network was applied to minimize human error during the inspection. The results showed that the defects of connection weldment between the car body and bogie could be classified with more than 99.98% accuracy using CNN, and the effectiveness can be verified in the case of an inspection.