• 대한안전경영과학회지
• /
• 제14권3호
• /
• pp.127-134
• /
• 2012

Plant safety management that is enforcing introducing more than 95% in domestic manufacturing industry is using total plant efficiency by the evaluation index, and as a result, can see a lot of examples that plant productivity, economy and safety is increased. The efficient safety estimation for a business should analyze an accident data by considering every possible and potential factor. This study's purpose centers plant safety management activities that is management system for plant production and safety efficiency's maximization, plant evaluation system that plant safety management activities factor(reliability, maitainability, safety, service quality) that is enforcing in manufacturing industry can develop evaluation model that can evaluate qualitative activities by quantitative activities in process that maximize plant safety management wishes to do design.

• 대한안전경영과학회지
• /
• 제9권2호
• /
• pp.1-8
• /
• 2007

Safety check-up and individual education, safety status wishes to present included safety assessment table for safety management assessment system construction about unit work process in Study. Safety management assessment table gives each grades about worker of unit work process, safety check-up, education, management and identifies merits and demerits of unit work process, it is that propose safety management assessment system that can reduce accident occurrence possibility.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.255-258
• /
• 2015

Scaffolds are frequently used in construction projects. Despite the impact on the entire safety, scaffolds are rarely analyzed as part of the safety planning. While recent advances in BIM (Building Information Modeling) provides opportunity to address potential safety issues in the early planning stages, it is still labor-intensive and challenging to incorporate scaffolds into current manual jobsite safety analysis which is time-consuming and error-prone. Consequently, potential safety hazards related to scaffolds are identified and presented during the construction phase. The objective of this research is to integrate scaffolds into automated safety analysis using BIM. A safety checking system was created to simulate the movements of scaffolds along the paths of crews using the scaffolds. Algorithms in the system automatically identify safety hazards related to activities working on scaffolds. Then, the system was implemented in a commercially available BIM software program for case studies. The results show that the algorithms successfully identified safety hazards that were not noticed by project managers of the projects. The results were visualized in BIM to facilitate early safety communications.

• 한국재난정보학회 논문집
• /
• 제19권1호
• /
• pp.105-116
• /
• 2023

연구목적: 본 연구에서는 최근 항공산업현황과 항공안전관리시스템 운영체계 현황을 살펴보고 현재 운영중인 항공안전관리시스템의 미비점을 파악하여 항공안전관리의 선제적 예방 및 개선방안을 제시하는 것을 목적으로 한다. 연구방법: 최근 발생한 사건사고조사와 국내법 현황, 해외 운영기관 및 안전관리 체계 분석을 통해 항공안전관리의 개선방안을 제시하였다. 연구결과: 최근 발생한 항공기안전 관련 사건과 현재 운영하고 있는 항공안전관리점의 미비점과 국외 항공선진국의 대응 사례를 통하여 관리체계와 법제도 측면의 개선점 및 예방적 항공안전을 위한 관리방안을 도출하였다. 결론: 항공안전관리 개선방안을 데이터를 활용한 기법을 기반으로 제시하였으며, 추가 관련 연구를 통해 구체화해 나가야 할 것이다.

• 한국전기전자재료학회논문지
• /
• 제36권6호
• /
• pp.598-602
• /
• 2023

With the purpose of instilling an awareness of the safety of users of electrical equipment and inducing voluntary facility improvement through the safety rating system for general low voltage electrical equipment, simulation and field application of the safety rating of general low voltage electrical equipment were conducted. For the introduction and application of the safety rating system for general low-voltage electrical equipment, data related to domestic safety was investigated and analyzed, cases of introduction in other fields were reviewed, and for design, the 4M risk assessment method of the Korea Occupational Safety and Health Agency and the cases of safety index development in Korea were analyzed and standardized. Safety rating system simulations were conducted for general low-voltage electrical equipment, and problem improvement measures were prepared by analyzing the results through on-site verification and simulation applied to the initial design. Design standards for the introduction of the safety rating system for general low-voltage electrical equipment were prepared, and 394 youth training facilities were applied to the field to see if the design standards were practically applicable to the field. With the application of the safety rating system for low-voltage electrical equipment for general use, youth training facilities that had been classified as 'appropriate' were able to induce an upgrade to a higher level through voluntary facility improvement according to the application of grades (A to E). As a result of inducing voluntary repair projects based on the results of the 1st and 2nd inspection of youth training facilities, it was confirmed that 86 facilities received grade A, 225 facilities received grade B, and only 311 facilities received grade A to B out of a total of 394 facilities, and there was no grade E.

• 자동차안전학회지
• /
• 제9권1호
• /
• pp.19-24
• /
• 2017

This paper present a performance evaluation scenarios to assess the safety performance of autonomous emergency braking (AEB) system for cyclist collision. To guarantee the safety performance of AEB for cyclist, AEB system should be tested in various scenarios which can be occurred in real driving condition. For this, real-traffic car-to-cyclist collision data are analyzed to classify the real traffic collision scenarios. Using this information, typical car-to-cyclist collision scenarios are selected. Also, in order to develop the detail features of these collision scenarios, several accident cases related with these scenarios are explained. Based on these information, test scenarios which can describe the car-to-cyclist collisions occurred in Korea are proposed. For practicality and feasibility of the test scenarios, proposed scenarios should be designed to assess the safety performance of AEB system effectively. For this, some test scenarios are combined or removed based on the consideration about the effectiveness of each scenario to the assessment of the performance of AEB system. To confirm that the proposed test scenarios are realistic and physically meaningful, simulation is conducted using simple AEB system in proposed test scenarios.

• 해양환경안전학회지
• /
• 제12권4호
• /
• pp.241-246
• /
• 2006

우리 정부와 해운기업은 해상에서의 인명 및 환경보호를 위해 노력하고 있지만 아직까지 내항선에서의 안전관리가 미흡하여 내항선에 맞는 체계적이고 현실적인 안전관리체제 운영의 내실화 방안이 절실하다. 본 논문은 관련기관 및 해운기업에 설문조사를 하였으며, 실증분석을 통하여 현 내항선안전관리의 문제점을 파악하고 개선하여 우리나라 내항해운에 적합한 안전관리체제의 내실화 방안을 제시하고자 한다.

• 한국안전학회지
• /
• 제26권4호
• /
• pp.7-13
• /
• 2011

A study on reliability estimation of sequential-ordered multiple failure modes, which are sequentially ordered between failure modes in a considering system, was performed. Especially, an approach to estimate the probabilities of failure modes has been proposed under an assumption that failure modes are mutually exclusive and sequentially ordered by only a critical variable. A feasibility of the proposed approach were studied by a practical example, which is a reliability estimation of passive safety systems for a probabilistic safety assessment(PSA) of a very high temperature reactor(VHTR) that is under development as a future nuclear system with enhanced safety features. It is difficult to define a robust failure state of this nuclear system because of its enhanced radiation release characteristics, so the new approach is a useful concept to estimate not only its safety but also a PSA. A feasibility study applied two failure modes(e.g., small and large release of radioactive materials) with considering the integrated behavior of this nuclear system. It is expected that the multiple release states for a practical estimation can be easily extended to the aforementioned example. It was found out that the proposed approach was a useful technique to cover the unfavorable features of this nuclear system as to performing a VHTR PSA.

• 대한안전경영과학회지
• /
• 제5권2호
• /
• pp.1-10
• /
• 2003

The discussion for the structure of the intergrated management system(IMS) isbeing made process vigorously in the time of industrial standard in this study. Therefore, safety, health, environment management system was compared, the management method was found, and task standard and object were selected. The structure of database will be possible to prevent industrial injury and environment pollution prevention.

• 시스템엔지니어링학술지
• /
• 제3권1호
• /
• pp.27-31
• /
• 2007

A complex system like ATM(Air Traffic Management) has safety problem emerging from complex interactions between systems. In complex systems, malfunctions of components are not the only causes of critical accidents. To resolve this problem many researchers have proposed new safety analysis models for complex systems. This research is a way of improving safety analysis model focusing on systems engineering design model for ATM.