• 한국안전학회지
• /
• 제8권4호
• /
• pp.65-72
• /
• 1993

This study is conducted for both examination of a possiblity of danger and investigation of operational condition of selected 120 companies, to establish the safety standard of workplace hazards.

• 한국가스학회지
• /
• 제12권3호
• /
• pp.81-84
• /
• 2008

본 연구는 현재 상용화를 추진중인 Propane-DME(dimethyl ether) 혼합가스를 가정용 가스레인지에 적용하였을 경우 각 버너에서의 열효율 특성이 KS 기준에 부합되는지를 알아보기 위하여 국내 4개사의 가정용 가스레인지를 대상으로 Propane 100%인 가스와 Propane-DME 혼합비율이 $80%{\sim}20%$(wt.%)인 혼합 가스에 대하여 실험을 수행하였다. 실험결과, DME의 발열량이 낮아 DME 혼합비율이 높아질수록 열효율은 감소하는 것을 알 수 있었다. 또한, 4개사 중 1개사의 제품은 Propane-DME 혼합비율이 $80%{\sim}20%$(wt.%)인 혼합가스를 사용하였을 경우 열효율이 KS 기준인 40%에 미치지 못하는 것으로 나타났다. 이에, Propane-DME 혼합비율이 $80%{\sim}20%$(wt.%)인 혼합가스를 가정용 가스레인지에 적용하기 위해서는 적정한 기준개발이 요구된다.

• 대한안전경영과학회지
• /
• 제11권2호
• /
• pp.167-178
• /
• 2009

De facto standards can be divided into the U.S. group standards' and 'forum and the consortium standard. mainly applies to high-tech industry forums, and a consortium standard of the industry given the nature of the standard are frequently revised, the country Due to the introduction of standard time. Economic loss to consider when in reality, the introduction of national standards of the United States is limited to the desirable standard, and the fact the actual award of standards, national standards, or if you want to introduce standard, each of depending on the type of attitude and strategy for standards by category, based on the characteristics of each body strategy and are needed. Through this study on utilization of de facto standards for national standards, it is researched that major de facto standards bodies status and domestic industrial fields which need utilization of de facto standards for national standards. Through overseas Case, effective usage of de facto standards will be obtained.

• 한국식품위생안전성학회지
• /
• 제17권2호
• /
• pp.55-60
• /
• 2002

In order to investigate the microbiological contamination of spring water, we performed the standard plate count, coliform and psychrotrophilic bacteria in 109 spring waters in Seoul. Of 109 spring waters, geometirc mean standard plate count was 0.19 CFU/ml, and the highest in Mt. Boolam, 4..43 CFU/ml and Mt. Dobong, 3.86 CFU/ml, but not detected in Mt. Woomyun and Mt. Cheonggye. Four spring waters have shown over 100 CFU/ml in standard plate count. The geometric mean psychrotrophilic bacteria was 49.2 CFU/ml, the most prevalent spring water was Mt. Nam, 125 CFU/ml, the lowest Mt. Woomyeun. Among a total of 109, coliform was detected from 21 spring waters(19.3%) and the geometric mean of coliform was 0.005 MPN/100ml. The isolated genera of coliform were 7 isolates of E. coli(33%), 5 Klebsiella(24%), 4 Enterobacter(19%), 3 Citrobacter(14%) and 2 Serratia(10%), respectively. The 22 spring waters(20.2%) failed to meet the standard limits of drinking water based on regulation in Korea. The inappropriate rate of standard plate count in spring water was 4.5%, that of coliform was 81.1% and both of them was 13.6%. There was the significant correlation between standard plate count and psychrotrophilic bacteria in spring water(r=0.95, p<0.01).

• Nuclear Engineering and Technology
• /
• 제49권7호
• /
• pp.1537-1546
• /
• 2017

Many thermal-hydraulic tests have been conducted at the Korea Atomic Energy Research Institute for verification of the SMART (System-integrated Modular Advanced ReacTor) design, the standard design approval of which was issued by the Korean regulatory body. In this paper, the contributions of these tests to the standard design approval of SMART are discussed. First, an integral effect test facility named VISTA-ITL (Experimental Verification by Integral Simulation of Transients and Accidents-Integral Test Loop) has been utilized to assess the TASS/SMR-S (Transient and Set-point Simulation/Small and Medium) safety analysis code and confirm its conservatism, to support standard design approval, and to construct a database for the SMART design optimization. In addition, many separate effect tests have been performed. The reactor internal flow test has been conducted using the SCOP (SMART COre flow distribution and Pressure drop test) facility to evaluate the reactor internal flow and pressure distributions. An ECC (Emergency Core Coolant) performance test has been carried out using the SWAT (SMART ECC Water Asymmetric Two-phase choking test) facility to evaluate the safety injection performance and to validate the thermal-hydraulic model used in the safety analysis code. The Freon CHF (Critical Heat Flux) test has been performed using the FTHEL (Freon Thermal Hydraulic Experimental Loop) facility to construct a database from the $5{\times}5$ rod bundle Freon CHF tests and to evaluate the DNBR (Departure from Nucleate Boiling Ratio) model in the safety analysis and core design codes. These test results were used for standard design approval of SMART to verify its design bases, design tools, and analysis methodology.

• 한국재난정보학회 논문집
• /
• 제19권3호
• /
• pp.719-728
• /
• 2023

연구목적: 이동식크레인은 높은 사망률에 기여하는 기계로 최근 6년간(2016~2021) 사고사망사례 중 건설업 2,574건을 분석한 고위험요인(SIF)정보에서 이동식크레인의 사고는 총 61건의 재해가 발생하였다. 현장의 안전대책에도 불구하고 제대로 활용이 안되고 있다. 본 연구에서는 표준 리스크 평가 지수를 제시하여 사고예방에 기여하고자 한다. 연구방법: 전문가 면담과 사망사고 사례분석, 현장실태분석, 문헌조사를 통해 위험성평가의 4M방식의 표준 리스크 평가 지수 방법을 제시하고자 한다. 연구결과: 현장 8개현장 위험성평가를 분석한 결과 재해예방에 실질적인 기여를 할 수 없다는 결론을 얻었으며, 표준 리스크 평가 지수 방식의 개선방안으로 적용하여야 한다. 결론: 건설현장에서 표준 리스크 평가 지수방식으로 전환함으로써 안전보건관계자 및 근로자가 쉽게 이용할 수 있고 재해감소에 기여할 수 있을 것으로 제안한다.

• 대한안전경영과학회지
• /
• 제11권2호
• /
• pp.33-40
• /
• 2009

The Railroad Safety Act was implemented in 2005 due to the increased concerns regarding railroad safety since the Daegu subway fire in 2003. In line with this, the Act became a standard to build the total railroad safety systems which has been overlooked compared to the quantitative growth of the railroad business. The minister of the ministry of Land, Transportation and Maritime Affairs lays down the Act for railroad Companies to conduct emergency programs in response to the emergency occurring on the railroad such as fire, explosion, derailment, etc. By enacting the Safety Act, the nation's construction of the contingency management system for railroad emergency increased", and it made the railroad company prepare the Emergency SOP by establishing 'The guideline on the Establishment of the railroad Emergency Plan' in order to support the efficiency of the Act. In line with this, I would like to analyze a matter of system development and the main function of the "railroad Emergency Training Program" for activation improvement of standardized operation procedure developed through the 'Total capitalize Safety Technology development'.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.1389-1396
• /
• 2008

The recent Sichuan earthquake(2008) in China and Iwate-Miyazaki earthquake(2008) in Japan give Korea peninsula warning that it is no more safety zone against damage by earthquake events. So, rapid and appropriate countermeasures for dam operation and management against earthquake are needed. In Korea earthquake design standard(MOCT, 1997) has been revised after Kobe earthquake. Installation of seismometer and monitoring of earthquake for special class dams is requlated in dam aseismic design standard(MOCT, 2001). Accelerometer installation project for existing dams has been carrying out by K-water to establish an earthquake network for dam safety. Real-time dam earthquake monitoring network has also been developed to detect an earthquake efficiently and to warn to dam administrators as soon as possible. In this study, dam real-time earthquake monitoring system developed by K-water was introduced and applicability of real earthquake record measured by this system to dam safety management was illustrated.

• 로봇학회논문지
• /
• 제14권4호
• /
• pp.333-339
• /
• 2019

Cobots are industrial robots with greatly enhanced safety functions that enable them to work in the same space with workers without protector. Cobots are regulated by the Industrial Safety and Health Act and must be certified according to the manufacturing stage, installation stage and usage stage. The ISO 10218-2 standard applied in the installation phase is difficult to apply in the field. Therefore, it is necessary to develop a risk assessment method based on ISO 12100 standard. This paper proposes a new methodology that combines 'JSA' and 'What-if', which reflects the human error and the lack of known risk factors. Accordingly, a new risk assessment template was proposed and the effectiveness of the developed new template was examined. The current cobot safety regulations need to be unified with safety inspections scheme, and robot safety experts and infrastructures need to be expanded and Robot safety regulations should be unified to 'Robot Act'. Based on this research, risk assessment methods suitable for the field need to be developed additionally, and robot safety regulation needs to be transformed to promote the industry.

• 대한의용생체공학회:의공학회지
• /
• 제31권2호
• /
• pp.129-133
• /
• 2010

Intense pulsed light(IPL) is a photo-therapeutic medical device using xenon lamps with optical characteristics of incoherence, defocusing, and polychromatic. IPL has been recognized as a representative medical therapeutic device with growth of domestic skin care market. However, there is no standard regulation manual and guideline to evaluate the safety and performance of IPL. International Electrotechnical Commission(IEC) is being statued "Technical Report IEC TR 60825-16" which is a guidelines for the safe use of intense light source equipment on humans and animals. In this study, a standard Korea Food & Drug Administration (KFDA) regulation for the safety and performance of IPL was suggested by developing minimal evaluation methods for optical parameters of IPL such as output energy density, pulse mode, spot size, wavelength and uniformity of output light. We expect that this study may be a step to statue a standard regulation manual and guideline for IPLs used in domestic.