• Journal of the Korean Professional Engineers Association
• /
• v.18 no.3
• /
• pp.21-27
• /
• 1985

Earthen mass located beneth a sloping group surface, whether natural or manmade, have a tendency to move downward and outward under the influence of gravity. Unless this tendency is suitably counteracted by the Shearing resistances within the mass, a landslide occurs. Avoiding such instabilities is a major concern of the geotechnical engineer. The shearing behavior of a soil is determined empirically, i.e., by field tests or laboratory tests. This results are applied to the slope stability analysis. The factor of safety for slope stability analysis is much more sensitive to the choice of strength parameters as interpreted from soil tests than to the choice of the computational method of analysis. This paper was investigated the influence of the change in the factor of safety due to a change in one of the parameters, relative to the total change in the factor of safety due to change in all parameters. A conclusion may be reached with respect to the required precision definition of the different variables to limit uncertainties in the factor of safety to tolerable levels.

• Journal of the Korean Society of Safety
• /
• v.17 no.4
• /
• pp.61-65
• /
• 2002

Nonpremixed counterflow flames at low strain rates, $ag=12s^{-1}$ and $12s^{-1}$, were numerically simulated to investigate the effects of the duct thickness on the flame structure in normal gravity. For small values of the duct thickness, the positions of the flame and stagnation point were highly sensitive to the duct thickness. When the duct thickness was greater than 6mm, however, the effects of the duct thickness on the flame structure were negligible. The computed temperature along the duct centerline agreed well with measurements.

• Journal of Auto-vehicle Safety Association
• /
• v.15 no.1
• /
• pp.7-15
• /
• 2023

The purpose of this study is to predict the dynamic behavior of clamshell hood system on the harsh road driving condition, and secure the safety and durability performance of the system. The equation of motion of hood system is derived and the numerical analysis is implemented to obtain the lateral movement of the hood system. Also, the actual Belgian road test results are correlated to the predicted ones, and confirm the reliability of the system. Then, the parameter study is conducted to figure out the sensitive factors to affect the dynamic behavior, and the engineering design guide to make the system robust to confine the minimum friction force generated from hood latch and maximum hood weight is suggested from this research.

• International Journal of Safety
• /
• v.9 no.2
• /
• pp.22-28
• /
• 2010

This paper describes a web-based design review system as a knowledge management system relating reliability and safety system design. Since people's consciousness for safety and security become sensitive and increases the need of establishing a proactive prevention method for internal failures and relating risks in products. It also means that prevailing tacit knowledge in retired workers, in order to transform them to be easily used to support new system development, become more important. When considering safety and reliability design, at least two data sheet are necessary; Failure Modes and Effects Analyses (FMEA) and Risk Assessment (RA). These two data are practically made separately. However, it includes the concerns that a risk by failures during long-term use may not be noticed. To overcome this insufficiency, a support tool for integrating reliability evaluation and risk assessment data simultaneously is expected to be revealed. The authors have then developed a web-based design review system for reliability and safety system design. The system include various profitable functions; making FMEA and RA sheet, retrieving past data sheet for engineering change management and new product development and web-based discussion to increase the efficiency of discussion. The system is applied to one practical development works in order to demonstrate its effectiveness that is to be made clear by interviewing user's qualitative comment.

• Journal of Food Hygiene and Safety
• /
• v.8 no.4
• /
• pp.195-204
• /
• 1993

Basolateral and brush border membrane (BLM and BBM) vesicles of renal proximal tubules were prepared from adult male New Zealand White rabbits to evaluate as a potential model for assessment of nephrotoxicity. PAH uptakes using BLMV, glucose and leucine uptakes using BBMV were measured in the rabbits treated cephaloridine. In addition, urinalysis and histopathological studies were performed to investigate the correlationship with membrane vesicle uptakes. The results were as follows: (1) the activite of Na+, K+ -ATPase was enriched 12.3-fold in vasolateral memvrane vesicles (BLMV) and the specific activity of alkaline phosphatase in purified brush border memvrane vesicles (BBMV) was enriched 10.1-fold compared with each of microsomal homogenate. (2) In the uptake experiments, cephaloridine decreased initial and probenecid-sensitive PAH uptakes in BLMV. (3) Cephaloridine tested decreased initial and phlorizin-sensitive glucose uptakes in BBMV. (4) Cephaloridine tested decreased initial and Na+-dependent leucine uptakes in BBMV. (5) Cephaloridine tested significantly increased the urinary excretion of glucose and activity of ${\gamma}$-GTP. (6) Cephaloridine tested caused moderate necrotic changes in renal tubular cells and formation of urinary cast in the lumina of Henle's loop and collecting tubules besides the swelling of renal tubules.

• Nuclear Engineering and Technology
• /
• v.55 no.4
• /
• pp.1571-1584
• /
• 2023

In this study, a numerical analysis was performed as part of an international joint research project to reproduce a real cable tray fire that occurred in the heater bay area of the turbine building of a nuclear power plant. A sensitivity analysis was performed on various input parameters to derive results consistent with the sprinkler activation time obtained from the fire event analysis. For all sensitive parameters, the normalized sprinkler activation time correlated well with the power function of the normalized sprinkler height. A correlation equation was developed to identify the sprinkler activation time at any location when determining the slope or fire growth rate under the conditions assuming a linear or t-squared heat release rate (HRR) time curve. Various cable fire growth assumptions were used to determine which assumption was better to provide the prediction coincident with the information given from the fire event analysis in terms of the sprinkler activation time and total energy generated from cables damaged by fire. In the comprehensive analysis of all the sensitive parameters, the standard deviation of the input parameters increased as the sprinkler height decreased. Within the range of the sensitivity parameter values given in this study, when considering all sprinkler heights, the standard deviation of the cable model change was the largest and that of the overhang position change was the smallest.

• Journal of the Korean housing association
• /
• v.24 no.6
• /
• pp.41-49
• /
• 2013

This study finds out the aged consumers' needs on the developing elderly friendly and sensitive bathtub. This bathtub focuses on enhancement of multi-senses and enhancement of health, safety & convenience during bath. The enhancing multi-senses would have four functions; therapy with color and aroma, the massage with micro water bubbles, the visual and auditory with TV & cinema, and the auditory with music and radio. Also, enhancing others of bathtub would have seven functions; emergency bell, blood-pressure check system for health condition, water temperature indicator, keeping water warm, reading a book in that, and controlling of house entrance door and a getting the phone during bath. The aged consumers' needs find throughout a questionnaire survey, and 497 data was analyzed. The main results are as follow. They consider a full bath behavior as a healthcare. They have an intention to purchase or use the elderly and friendly bathtub, and they prefer using it in common facilities to using it at home. They highly need health related function of bathtub, which are massage (64.4%), blood-pressure check system (55.1%) and aroma therapy (45.7%). The emergency bell (67.0%), keeping water warm (62.2%), and water temperature indicator (49.7%), related to safety & information function of bathtub, are needed. Also, they think tolerance for error and low physical effort in bathtub design alternative, opening door and inside sitting support, to be important.

• Science of Emotion and Sensibility
• /
• v.17 no.1
• /
• pp.29-38
• /
• 2014

In recent days, according as ergonomics and aesthetic engineering are important factors in the product market, there is a demand to develop automobile seat and interior designs which are focused on sensitive elements such as aesthetic and comfort features in order to satisfy the sensitive needs of consumers. To meet such demands, car seats are turning into functional and sensitive products that reflect elements of function and entertainment. According to such trends, this research is aimed to develop the illuminating car seat fabric that serve such functions as recognizing and reacting to car environments, which includes sensing over-speed, open doors, and unfastened safety belts through the illuminating car seat fabrics by optical fiber. For this purpose, basic physical properties of optical fiber are analyzed, appropriate weaving and etching technologies are applied, and the woven fabric of optical fiber for car seats are illuminating depend upon car environments. Moreover, the applicable woven fabric of optical fiber is deduced after evaluating the physical properties (such as tensile strength, heatproof, anti-fouling, washable and combustible traits) for the appropriateness of applying the woven fabric of optical fiber to car seats. For this purpose, the woven fabric of optical fiber is covered according to car seat processes; the optical fiber applied to seats is composed that it may be connected to one end of the connector linked to a LED so that it may perform functions like sensing over-speed, open doors, and unfastened safety belts; the sensed signals are transmitted to the control part, and luminescent signals are transmitted to LED.

• Journal of Food Hygiene and Safety
• /
• v.11 no.2
• /
• pp.129-132
• /
• 1996

Recently, as concern about the residual antibiotics in milk increase, the detection methods of residual antibiotics used extensevely at the present time were investigated and compared to their properties and the detection limits of variable antibiotics. At first, comparactive tests of the detectable sensitivity of 4 test organisms, B. cereus, B. subtilis, M.luteus, B.stearothermophilus C-953, were performed by disc assay. As a result, B.stearothermophilus was the most sensitive strain of all other strains and showe the detect limit of 5-50 ppb for penlicillins (PCs). And also, B.subitilis was showed the more effective detection limit, 200-400 ppb, for aminoglycosides (AGs) and M.luteus was showed predominant sensitivity , 50-500 ppb for macrolides(MLs) and B.cereus was the most sensitive strain for tetracyclines (TCs) and showed the detection limit of 100-400 ppb. Therefore, each test strains were showed a different sensitivity in the detection of the different antibiotic families. When the detection limit of disc assay and other methods were compared, TTCmethod was less sensitive than other methods showing 5-50 ppb detectable lebel for PCs. Also, for the detection of other antibiotic families TTC method was showed the worst sensitivity and Delvo and Charm Farm tests were similar to the detectable properties of AGs and MLs. Although disc assay was showed the similar detection limit for PCs with Delvo and Charm Farm, it was more widely effective for the detection of kanamycin, erythromycin, chlortetracycline, doxycycline, verginiamycin and so on than Delvo or Charm Farm. CharmII test was showed the best sensitivity for the most of antibiotics except neomycin and gentamycin. But it was necessary that different tests must be performed to each antibiotic family and so it was regarded that the effectiveness of that method was low.

• Journal of Korean Academy of Nursing Administration
• /
• v.20 no.1
• /
• pp.35-47
• /
• 2014

Purpose: The purpose of this study was to describe nurses' experiences of accidents in patient safety. Methods: Data were collected from October 8, 2011 to January 31, 2012 through in-depth interviews with seven nurses who had worked on wards or in the ICU in a university hospital. Data were analyzed by applying Colaizzi's phenomenological methodology. Results: The following six categories were extracted: Fear of the patient's condition caused by the accident, Conflict in the accident report, Blame on others and circumstances, Feeling guilty and sorry as the patient's condition is improving, Being disappointed with the unfavorable atmosphere in dealing with the accident, After the accident, being sensitive in performing nursing duties and being faithful to the principles. Conclusion: The results indicate that the organizational culture in the hospital related to accidents in patient safety is still closed and punitive, and such an atmosphere causes nurses to feel seriously hurt, but through this experience nurses are likely to mature as nursing professionals. Programs on prevention of accidents in patient safety and a system to guard against these accidents should be established. Also the organizational safety culture should be improved.