• Journal of the Korea Computer Industry Society
• /
• v.2 no.8
• /
• pp.1133-1138
• /
• 2001

In this paper, we implemented that MMT(Multimedia Terminal) demonstrates spot news, weather forecast, sports news and cultural news employed CDMA mobile communication networks. The MMT displays mobile pictures/joint pictures/on screen ad and to make known Bus stop or Mobile stations. The MMT gives driver's and passenger's safety and valuable information for one's use GPS satellites. We verified to make real time mobile picture transfer use of CDMA2000 1×(IS-95C) network and development the scheduler control each module. This system tested on vehicle that train and bus. MMT was implemented high reliability and stability by the embedded system. The mobile terminal shows reliable data transfer rate about 74Kbps on IS-95C.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.1381-1388
• /
• 2011

Recently, Because of weight lighting and tighten safety regulations of the railway vehicle railroad weight lighting and safety improvement technology is internationally required. Slide step for moving the passenger to high flatform in the railroad vehicle is recognized of important parts. However, Due to high price and weight, it is limited. In this research, In order to apply for railroad, it was redesigned to optimize part count and reduce the price and weight. By choosing honeycombcore as a part for enduring high weight and weight lighting, We produce honeycombpanel of sandwich structure which a different kind connected by using existing stainless(STS304)steel and thermo plasticity glue. Finally, we can find that honeycombpanel is suitable for weight lighting and high weight. As well as, with test result, we can prove that low-high platform railway system will be optimized, if steps are applied to honeycombpanel.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.3
• /
• pp.171-176
• /
• 2016

This paper proposes road safety facilities applying Hot-dip zinc-aluminum-magnesium alloy-coated steel sheets and coils to reduce the loss of function caused by the corrosion of steel in the service state. Vehicle crash simulations and full-scale crash tests were carried out to provide reliable information on evaluating the crash performance with the products of road safety facilities built with hot-dip zinc-aluminum-magnesium alloy-coated steel. From the results of the simulations and full-scale crash tests, the impact behaviors evaluated by the three-dimensional crash simulations considering the strain-rate dependency in a constitutive model were similar to those obtained from the full-scale crash test results. The full-scale crash test results met the crashworthiness evaluation criteria; hence, the proposed bridge barrier in this paper is ready for field applications.

• Journal of the Korean Society for Railway
• /
• v.17 no.2
• /
• pp.87-93
• /
• 2014

The KTX, running in Korea but imported from Alstom Co. in France, has folding type staircases complying with European standard EN 4752. However, when operating, the step size is only 200mm, while the Korean standard step size is 253mm, a standard reflecting the average value of persons aged 20~60. From the aspect of kinesiology, the current step size can cause falls or slips during embarking and disembarking of passengers because body load is mostly focused on the heel and the current step is much more narrow than the standard size. Thus, we have performed an analytical study to check the safety of folding type staircases on the KTX after re-design.

• Journal of the Korean Society for Railway
• /
• v.16 no.6
• /
• pp.447-453
• /
• 2013

Since PSDs(Platform Screen Doors) are set up at many subway stations, their design related to safety has become gradually important. In particular, the interference check with a running railway vehicle is the most important of performance indices because the collision between PSDs and vehicles can be dangerous for passengers in the car and on platforms. When the train comes into a station with a curvature, the passenger car has a large translational and rotational motion and the displacement is enough for coming in contact with PSD. The performance is affected by many design parameters such as rail design parameters and vehicle velocity. This study proposes dynamic analysis models for railway vehicles and rails. Some parameters were also considered in the models to determine their influence on the performance.

• Journal of Navigation and Port Research
• /
• v.38 no.3
• /
• pp.247-252
• /
• 2014

Despite the facts that navigation technology and educational programs were developed, and that maritime law has been enforced strictly, the number of maritime accidents has not dropped significantly. Accident prevention is emphasized because of the extreme life, property, and environmental losses that accompany maritime accidents. Even though there are a variety of preventive activities, their performance is not satisfactory. In order to promote preventive activities and to organize safety management, a Preventive Index of Ship Accident(PISA) and a Preventive Level of Ship Accident(PLSA) which are abstracted from the statistical data of ship accidents (2009~2013) are proposed. The survey module by which these variables can be calculated is composed of preventive domains such as education, engineering, enforcement and information, and is applied for the preventive indexes measurement of cargo, passenger, tanker, tugboat and fishery ships. We compared and analyzed measured result with statistical accident rates and cases to confirm the index utilities. It was found that there is some correlation between the index value and the ship accident rate. It is expected that this index will become useful to evaluate a preventive status for the prevention of ship accidents and for the maritime safety culture.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.2D
• /
• pp.163-170
• /
• 2008

According to the rules, a crash cushion is supposed to set up products that is satisfied with the standard of a performance test after performing the car crash test by road safety facilities and management guide. For development of crash cushion, performance should be estimated through the car crash test eventually. However, there is no reasonable design method which considers passenger's safety and only depend on crash test without an alternative plan. Therefore it incurs a loss materially and takes a lot. Therefore, we are asked to create a systematic design of the crash cushion. This study shows that a scientific basis of applying single degree of freedom when it designs the crash cushion after analyzing vehicle crash test data of crash cushion and also represents design of crash cushion through single degree of freedom response spectrum using calculated by crash test data on crash cushion.

• Journal of the Korean Institute of Gas
• /
• v.16 no.6
• /
• pp.102-106
• /
• 2012

The purpose of this paper is to study the failure cases in relation to system of Air Bag in vehicle happened in the field. In the first example, it was separated the soldering parts connected the wire pin between air bag module and clock spring of air bag. Whenever the pin shake by the car's vibration, the driver verified the malfunction phenomenon appeared air bag warning lamp on instrument panel in front of driver's seat. in car inside room. The second example, it verified the warning lamp lighting phenomenon of air bag by produced the circuit plate non-contacting of single an element in air bag electronic control unit. The third example, it verified the light of air bag warning indicator lamp by separated with soldering parts connecting inner pin and resistance terminal of seat belt pretensioner using passenger seat. The fourth example, when the passenger car crash a back of truck, the former bumper get jammed under the latter as the roof height of car low less than that. Therefore, the impact of Car's collision verified that don't transfer with body frame of vehicle because of no attachment impact sensor in it.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.5
• /
• pp.108-126
• /
• 2023

In this paper, the dynamic hard shoulder running for bus only (HSRFBO) was presented to solve the traffic congestion by increase the capacity in chronic congested sections of highways, and a simulation was performed to evaluate the comparison with the current hard shoulder running for all vehicles(HSRFAV) and median bus only lane and HSR(MBOLHSR). According to the evaluation results, it was evaluated to be more advantageous in terms of traffic flow and safety than the current HSRFAV. In addition, the speed of passing buses is slightly reduced compared to the MBOHSR, but the speed of entering and exiting buses is increased and the speed of buses and cars is greatly improved. Therefore It was analyzed that the efficiency of transport personnel was also improved. In particular, it is expected that traffic flow will be stabilized as the difference in speed between passenger cars and buses will be greatly reduced, and violations of exclusive bus lanes by passenger cars will be greatly reduced. In addition, the operation time of HSR is greatly reduced, so that the original function of the shoulder lane can be maintained as much as possible. As a result, it was analyzed that the risk of accidents was significantly reduced when operating HSRFBO compared to when operating MBOHSR, and cross-conflicts with high accident severity did not occur.

• Composites Research
• /
• v.37 no.1
• /
• pp.46-52
• /
• 2024

The development of transportation methods has improved human transportation convenience and made it possible to expand the travel radius of people with disabilities who have difficulty moving. However, in the case of WAV (wheelchair Accessible Vehicle), the safety that may occur in a vehicle accident is still lower than that of regular passenger seats. In particular, in the case of a rear-end collision that may occur in a defenseless situation, it can cause fatal neck injuries to disabled passengers. Therefore, a more detailed design plan must be reflected in the headrest to be applied to WAV. In this study, a multi-cell headrest was proposed to implement local compression characteristic distribution of the headrest during rear-end collision of WAV. Afterwards, a correlation analysis was performed between the passenger's NIC (Neck Injury Criterion) and impact energy absorption using the data set construction through analysis and the clustering results using k-means clustering. As a result of clustering, it was confirmed that data clusters with similar characteristics were formed, and a correlation analysis between NIC and impact energy absorption through the characteristics of each cluster was performed. As a result of the analysis, it was confirmed that the softer the cell compression characteristics in Mid3 and Mid6, the more impact energy absorption increases, and the harder the cell compression characteristics in Front2, Mid3, and Mid6, the more effective it is in reducing NIC.