• International Journal of Internet, Broadcasting and Communication
• /
• 제15권2호
• /
• pp.49-59
• /
• 2023

In accordance with the revision of "Special act on the safety control of publicly used establishments", this study is aim to measure the change in evacuation time due to whether safety facilities, etc. are installed of a room escape cafe business and kids cafe business(hereinafter referred to as "New publicly used establishments"), which were added as new targets of the publicly used business from June 8, 2022. In the case of new publicly used establishments or publicly used establishments whose owners are changed after the revision of the relevant laws, safety facilities, etc. are installed and maintained under the "Special act on the safety control of publicly used establishments", but in the case of existing businesses that have been operating even before the revision of the law, the business continues without safety facilities, etc. installed because the revised law is not retroactively applied. The purpose of this study is to compare and analyze the change in evacuation time by measuring the evacuation time to operating before the revision of the law to simulate evacuation at existing new publicly used establishments without safety facilities, etc. and measure the evacuation time at new publicly used establishments with safety facilities after the revision of the law

• International Journal of Internet, Broadcasting and Communication
• /
• 제15권2호
• /
• pp.60-72
• /
• 2023

The purpose of this study is to measure the change in evacuation time at high schools according to the change in hallway width using an evacuation simulation program and to analyze the result of such change. In order to measure the evacuation time according to the change in the hallway width according to the 「Rules on the Standards for Evacuation and Fire Protection Structures of Buildings」 and to analyze the change in evacuation time resulted from the increase in the number of occupants, a scenario was constructed by applying the 「performance-oriented design method and standard for firefighting facilities, etc.」. As a result of the experiment, it was found that the evacuation time was the shortest when the width of the hallway was the widest, which was 3m. On the other hand, the evacuation time took the longest at 1.8m, which was the width of the second narrowest hallway. For the safety of high school students who spend a lot of time at school, it is necessary to secure a wide hallway width when building a new school or to provide periodic safety education in the case of an existing school whose hallways are considered narrow.

• 대한안전경영과학회지
• /
• 제10권3호
• /
• pp.43-53
• /
• 2008

This study is carried out for the fire safety of the factory building, the fire risk reduction measure in compliance with an example approached in fire risk reduction systematically, contribute to reduce the fire risk. The analytical fire risk process of discovering, identifying, estimating and evaluating risk and control measure as risk reduction measures are core concept, applies loss prevention with loss control techniques. The painting process in the workplace where the fire hazard and death accident accompanies coexists. Loss prevention problem of creation prevention of dangerous atmosphere at workplace is health and human services problem of normal circumstances, must be inspected with problem of combustible gases at the time of fire explosion. Static electricity measure accomplished the risk control process thoroughly as the fire risk reduction process model with the ignition sources measure which is presented. Fire risk from within organizing will be able to classify with each field by detailedly but risk treatment process will be able to apply basically all the same concept. Consequently about risk management example from before, this study is proposed risk management techniques that standardized rightly in the actual condition of organization with one plan, with discovery of fire risk, the feedback process in compliance with a fire risk reduction and the review which control the result is joint responsibility of engineer, technical expert and manager as part of safety management to practice with the fact must be supervised.

• Nuclear Engineering and Technology
• /
• 제44권4호
• /
• pp.415-420
• /
• 2012

It is important to understand the amount of time required to execute an emergency procedural task in a high-stress situation for managing human performance under emergencies in a nuclear power plant. However, the time to execute an emergency procedural task is highly dependent upon expert judgment due to the lack of actual data. This paper proposes an analytical method to estimate the operator's performance time (OPT) of a procedural task, which is based on a measure of the task complexity (TACOM). The proposed method for estimating an OPT is an equation that uses the TACOM as a variable, and the OPT of a procedural task can be calculated if its relevant TACOM score is available. The validity of the proposed equation is demonstrated by comparing the estimated OPTs with the observed OPTs for emergency procedural tasks in a steam generator tube rupture scenario.

• 한국수소및신에너지학회논문집
• /
• 제29권5호
• /
• pp.466-472
• /
• 2018

The investigation of cryogenic liquid pool spreading is an essential procedure to assess the hazard of cryogenic liquid usage. In this experimental study, to measure the evaporation velocity when the pool is spreading, liquid nitrogen was continuously released onto unconfined concrete ground. Almost all of the reported results are based on a non-spreading pool in which cryogenic liquid is instantaneously poured onto bounded ground for a very short period of time. A simultaneous measurement of the pool location using thermocouples and of the pool mass using a digital balance was carried out to measure the evaporation velocity and the pool radius. A greater release flow rate was found to result in a greater average evaporation velocity, and the evaporation velocity decreased with the spreading time and the pool radius.

• 대한안전경영과학회지
• /
• 제8권3호
• /
• pp.27-36
• /
• 2006

The port, differently from general working place, is a closed area to execute security, customs, and quarantine procedures. The loading and unloading is being done differently by cargoes, ships, berths, and equipments. To load and unload a lot of equipments and different types of labor are required, in which work flow is very complicated. As above mentioned the port is very unique and deteriorated working place including danger. The purpose of this thesis is to propose ways to analyze and establish the preventive measure for cargo handling accidents in port. We have collected 923 accidents happened at Incheon Port during the period from 1994 to 2003. And to analyze and establish the preventive measure we have employed an advanced 6sigma DMAIC technology presently in spotlight as the best tool for management innovation. For the purpose of effective safety management of cargo handling in port, this thesis will help to revise and establish the law, system, standard, and standard working manual with respect to the port loading and unloading system. Now frequency of cargo handling accidents in port is highest for the second time among all industries, so we proposed the new safety management system to substitute port safety committee and to take full charge of safety in Ministry of Maritime Affairs and Fisheries.

• International Journal of Safety
• /
• 제1권1호
• /
• pp.28-35
• /
• 2002

Kullback Discrimination Information (KDI) is one of the pattern recognition methods. KDI defined as a measure of the mutual dissimilarity computed between two time series was studied for detection and classification of bearing flaking on outer-race and inner-races. To model the damages, the bearings in normal condition, outer-race flaking condition and inner-races flaking condition were provided. The vibration sensor was attached by the bearing housing. This produced the total 25 pieces of data each condition, and we chose the standard data and measure of distance between standard and tested data. It is difficult to detect the flaking because similar pulses come out when balls pass the defection point. The detection and classification method for inner and outer races are defected by KDI and nearest neighbor classification rule is proposed and its high performance is also shown.

• 한국안전학회지
• /
• 제32권3호
• /
• pp.21-27
• /
• 2017

Even if several chemical accident prevention systems such as PSM(Process Safety Management), RMP(Risk Management Plan), etc. have been carried out, many chemical accidents have still occurred at industrial plants in Korea. We describe the status of chemical industry and the trend of occurrence of chemical accidents in Korea. And this paper analyzes the recent chemical accidents in eight ways. These ways include chemical accident forms, ignition sources, sources of chemical equipment, human vs equipment/material causes, worker's working situation, employee scale, hazardous substances, week & time, fatalities of manufacture & contractor's workers. Finally we proposes the four representative prevention measures brought to result of cause analysis by accident statistics.

• 대한임베디드공학회논문지
• /
• 제14권1호
• /
• pp.43-49
• /
• 2019

Recently, the importance of industrial fieldbus has been highlighted since the emergence of Industry 4.0. In particular, the Ethernet-based fieldbus protocol is actively used in automation systems. This paper proposes a safety fence system based on EtherCAT, a type of Ethernet-based fieldbus, to measure external loads. In order to measure the external loads, a force sensor was connected to an EtherCAT slave that transmits the sensor data to an EtherCAT master in real-time. The master ultimately controls the angle of the safety fence when it detects danger based on the given data. In the future, more effiecient safety fence system will be developed by using a HMI system to communicate with the EtherCAT master to manage safety and by employing multiple sensors to increase the accuracy of the fence system.

• 한국산업보건학회지
• /
• 제31권2호
• /
• pp.128-137
• /
• 2021

Objectives: The purpose of this study is to propose a smart work environment management service model that can measure and maintain work environments in real time. Methods: How existing private consignment business is being carried out was identified and a simpler method was applied to the model. Results: Common support was provided according to the Korea Standard Industrial Classification. Hazards suitable for the relevant industry classification were selected and information on safety and health education, etc. was provided. Theme-specific support provides services focusing on hazards that can be measured through applications. Hazards are evaluated by applying new standards divided into 'Good', 'Average', 'Inadequate', and 'Faulty'. Conclusions: This model is designed to help employers identify health and safety conditions in small businesses where it is difficult to hire health and safety professionals. Using the app proposed in this study, anyone can easily measure their work environment at any time.