• 한국재난정보학회 논문집
• /
• 제16권2호
• /
• pp.331-342
• /
• 2020

연구목적: 본 연구는 건설업에서의 사고·장애 예방을 위해 시행되고 있는 안전관리비 제도의 문제점과 개선방안 도출을 목적으로 한다. 연구방법: 연구를 위하여 건설안전관리자 20명을 대상으로 세부 설문지를 개발하여 전문가집단인터뷰(FGI) 분석기법을 시행하고 분석하였다. 연구결과: 분석결과 '안전관리비 제도의 이해'를 위해 기준 매뉴얼 작성, 정기 현장교육 시행, 안전관리비 모니터링 시스템 구축 등의 대안이 도출되었고, '안전관리비 제도의 효율성과 필요성'을 개선하기 위해 이례상황 시 즉시 투입할 수 있도록 유연한 비용 집행의 자율성을 보장할 필요성이 있으며, 과도한 증빙서류 요구로 개선되어야 할 항목으로 분석되었다. 결론: 본 연구를 통해 건설현장의 안전관리비 제도 개선을 위한 문제점을 인식하고, 건설안전관리자에 의한 개선방안을 정책적·제도적인틀속에서 마련되어야 할 것이다.

• 한국안전학회지
• /
• 제28권5호
• /
• pp.49-53
• /
• 2013

This paper describes the assessment of seismic performance of the concrete gravity dam seismically reinforced by post-tensioned anchors. In order to evaluate the seismic performance, the response spectrum analyses have been carried out for 7 different configurations of the post-tensioned anchors, and then their performance improvement in the maximum tensile and compressive stresses is compared to each other. The comparative results demonstrate that the layout of the post-tensioned anchors strongly influences the seismic performance of the concrete gravity dam. In this study, the slightly-inclined vertical anchorage system shows the largest improvement on the overall performance of the seismically-excited concrete gravity dam.

• 한국안전학회지
• /
• 제25권2호
• /
• pp.24-28
• /
• 2010

The nuclear power Plant onsite AC electrical power sources are required to supply power to the engineering safety facility buses if the offsite power source is lost. Typically, Diesel Generators are used as the onsite power source. The 125 VAC buses are part of the onsite Class 1E AC and DC electrical power distribution system. The DC power distribution system ensure the availability of DC electrical power for system required to shutdown the reactor and maintain it in a safety condition after an anticipated operational occurrence or a postulated Design Base Accident. Recently, onsite DC power supply system trip occurs the loss of system function. To obtain the performance such as reliability and availability, we analyzed the cause of battery charger trip and described the improvement of DC power supply system reliability. Finally, we provide reliability performance criteria of charger in order to ensure the probabilistic goals for the safety of the nuclear power plants.

• 한국안전학회지
• /
• 제14권3호
• /
• pp.181-192
• /
• 1999

Our government has been continuously making an effort to improve safety management and prevent accidents in small-to-medium sized enterprises, but the accidents are still happening. Since there hasn't been a study on the actual state of safety management for the munitions manufacturing industry so far, this paper aims to investigate and analyze the actual state of the munitions manufacturing companies in Kyung-In area and it also shows the countermeasures of improvement.

• 대한안전경영과학회지
• /
• 제20권1호
• /
• pp.23-31
• /
• 2018

Industrial disasters cause lots of damages from individuals to companies and country. Especially, damages caused by constructional disasters take very large portion in the whole industry and are accompanied by huge personal physical damages. For the prevention of disasters, roles of safety manager are very important and especially, effects of disaster prevention can be changed by occupational ability of construction safety manager. To improve job abilities of safety manager, job education is very important. This research suggested a model for job education management of construction safety manager and proposed improvements as a study on improvement of curriculum for vitalization of job education of construction safety manager so as to improve occupational ability of safety manager. To achieve them, this research examined standard and operation status of current job education of safety manager and the problems and suggested a model materializing job educational contents as a measure to vitalize job education system of safety manager.

• 대한안전경영과학회지
• /
• 제7권1호
• /
• pp.101-115
• /
• 2005

This study deals with the procedure of safety improvement, productivity increase ,and tact-time reduction through setting up the system about preventive maintenance. Actually, it is hard to establish and carry out preventive maintenance, even though we recognize the importance of the system concerning time, cost, labor, and so forth. In this study in the viewpoint of cost we are for achieving maximum efficiency by change and reduction of planning process adapted to the special work group. At first we briefly will mention the kind ,the necessity ,and the concept of preventive maintenance ,and then divide the equipment used in the assembly line into the two whether it is necessary or not by way of estimating the breakdown loss ,comparing with general establishment of preventive maintenance and modifying it to the case. At the second step we will establish the operation system of plan management related to production and quality in the special case. Check period and category will be set by dividing the assembly equipment into LCL and Focus in the third step. The forth step will contain the operation procedure in detail. And then we must make check and repair record periodically. Finally, on the basis of the record the selection of checking of significance will be conducted. This results in safety improvement, tact time reduction, and productivity improvement.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2004년도 추계학술대회
• /
• pp.131-141
• /
• 2004

This study deals with the procedure of safety improvement, productivity increase, and tact-time reduction through setting up the system about preventive maintenance. Actually, it is hard to establish and carry out preventive maintenance, even though we recognize the importance of the system concerning time, cost, labor, and so forth. In this study in the viewpoint of cost we are for achieving maximum efficiency by change and reduction of planning process adapted to the special work group. At first we briefly will mention the kind, the necessity, and the concept of preventive maintenance, and then divide the equipment used in the assembly line into the two whether it is necessary or not by way of estimating the breakdown loss, comparing with general establishment of preventive maintenance and modifying it to the case. At the second step we will establish the operation system of plan management related to production and quality in the special case. Check period and category will be set by dividing the assembly equipment into LCL and Focus in the third step. The forth step will contain the operation procedure in detail. And then we must make check and repair record periodically. Finally, on the basis of the record the selection of checking of significance will be conducted. This results in safety improvement, tact time reduction, and productivity improvement.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.63-64
• /
• 2012

• 한국의료질향상학회지
• /
• 제26권1호
• /
• pp.46-54
• /
• 2020

Purpose: The purpose of this study was to, present basic data on the necessity of introducing assistant staff to support administrative tasks related to patient safety. Methods: This was a cross-sectional study. The participants (n=103) of this study were nurses, working at general and long-term care hospitals in Korea. Data were collected using structured questionnaires on August 29, 2019 and analyzed with SPSS 25.0. Specifically, data analysis was conducted using frequencies, mean and standard deviation, independent t-test, and X²-test. Results: Assistant staff was needed to support patient safety tasks, but this required nurses who could fully perform patient safety tasks by supplementing their work experience rather than employees who only support administrative tasks. This is because the hospital's patient safety management activities are difficult to distinguish between administrative tasks and patient safety tasks, and even nurses with five years of work experience, must be aware of the basic concepts and should have knowledge of patient safety and have gained experience in managing the patient safety activities. Conclusion: Hospitals are calling for an improvement in the system that increases the number of workers in charge of patient safety affairs and lowers their work experience, rather than the introduction of assistant staff who help with patient safety work.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.2225-2234
• /
• 2011

According to Railway Safety Act, Korea Transportation Safety Authority (KOTSA) has been entrusted with 'Integrated Railway Safety Audit (IRSA) and has implemented the safety audit to the Railway operation agencies such as Korea Railway (KORAIL) and the Railway facility management organization such as the Korea Rail Network Authority (KR Network). The target of IRSA is to establish the effective rail safety management system and to raise the safety level of the Railway operation and facility agencies by checking synthetically their performance of safety duties with sincerity according to the Railway Safety Act. Even though newly introduced IRSA is conducted smoothly, it is necessary to study the methodology and criteria of the state's safety audit system. The purpose of this paper is to improve the efficiency of IRSA by the comparative research between IRSA and other similar safety audit system and to establish the consecutive improvement concept of IRSA. Second purpose is to confirm the effectiveness of IRSA by the analysis of the relationship between audit results and the safety level of the rail operation agencies.