• Journal of the Korea Safety Management & Science
• /
• v.14 no.4
• /
• pp.59-70
• /
• 2012

This study compared data regarding industrial accidents and awareness level for beauty product safety for four main parts of beauty industry such as hair-care, nail-care, skin-care, and make-up. Major risk factors in beauty industry are dust, musculoskeletal disorders, and organic solvent of beauty product in order of percentage. The specific types of industrial accidents in beauty industry are mainly associated with musculoskeletal system such as cuts, sprain, and varicose vein. They are mainly compensated by personal budget. The awareness levels of chemical and heavy metal containment for beauty product by beauty industry employee were 77.2% and 59.1% respectively. Most employee confirmed only important items of labelling requirement of beauty product. Also, most employee did not understand MSDS(Materila Safety Data) for chemicals used in beauty industry. Only 38.1% of beauty industry employee has had safety education while most employee (73.6%) realized that they needed safety education. Also, safety education supervised by KOSHA(Korea Occupational Safety and Health Agency) was the most preferred. This study would be good basis for safe and healthy working environment of beauty industry employee.

• Journal of Life Science
• /
• v.15 no.1 s.68
• /
• pp.1-8
• /
• 2005

The purpose of this study was to investigate the potential subacute toxicity of dimethyl disulfide by 3 weeks inhalation in F344 rats. The test article, dimethyl disulfide was exposed by inhalation to male and female rats at dose levels of 0, 5, 25, or 125 ppm/6 hrs/ day for 3 weeks. Five rats/ sex/ group were sacrificed on day 4 after the initiation of treatment, while 5 rats/ sex/ group were sacrificed at the end of treatment period. During the test period, clinical signs, mortality, body weights, food consumption, hematology, serum biochemistry, and gross findings were examined. Slight decreases in body weight gain were noted in both sexes of the highest dose group in a dose dependent manner but were only statistically different from the control animals in males of the group. A slight non-significant reduction in food consumption were also noted in the both sexes of the highest dose group. There were no adverse effects on mortality, clinical signs, hematology, serum biochemistry, and necropsy findings at any dose tested. Based on these results, it was concluded that the 3 weeks repeated dose of dimethyl disulfide by inhalation resulted in suppressed body weight gain and decreased food consumption at 125 ppm of both sexes. In the present experimental conditions, the target organ was not determined in rats. The no­observed-adverse-effect level (NOAEL) was considered to be 25 ppm/6 hrs/day for both sexes.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.19 no.4
• /
• pp.336-346
• /
• 2009

As a follow-up survey of A Study of Monitoring Method on Exposure Level and Biomarkers of Environmental Pollutants-Focused on Ulsan Industrial Comlpex Area, published in 2005, a close examination of the health status was conducted for selected Ulsan residents. Based on the previous study, a total number of 129 subjects were divided into two groups: the exposure group consisted of 39 residents whose blood levels of lead, mercury and/or cadmium were higher than international reference values, and 90 residents of control group with normal levels. Environmental exposure level and its association with health condition were examined by various methods such as questionnaire, analyses of lead, mercury and cadmium in blood and medical examinations. The geometric mean concentrations of lead, mercury and cadmium in blood were respectively $2.07{\mu}g/d{\ell}$ (exposure $2.54{\mu}g/d{\ell}$, control $1.90{\mu}g/d{\ell}$), $5.94{\mu}g/L$ (exposure $8.57{\mu}g/L$, control $5.07{\mu}g/L$), $1.32{\mu}g/L$ (exposure $1.30{\mu}g/L$, control $1.33{\mu}g/L$). The concentrations of the three heavy metals in blood showed lower levels than internationally recommended values except for blood mercury. Also, any abnormal or, peculiar disease, or target tissue damage related to the heavy metals was not observed among the all subjects. Therefore, it can be said that no significant difference of heavy metal concentrations and health conditions was found between the two groups.

• Research in Community and Public Health Nursing
• /
• v.24 no.3
• /
• pp.314-322
• /
• 2013

Purpose: The purpose of the study was to examine associations between job stress and work-related musculoskeletal symptoms (WRMS) in street sanitation workers. Methods: A cross-sectional correlational study was conducted with 87 male street sanitation workers at E Gu in Seoul. The Job stress and WRMS were measured by using the Korean Occupational Stress Scale-Short Form and the KOSHA GUIDE H-9-2012 instrument, respectively. The WRMS was evaluated according to the National Institute of Occupational Safety and Health criteria. Results: The participants reported greater levels of insufficient job control and interpersonal conflict than the general Korean population. Of the participants, 44.8% reported WRMS at any body parts. Specifically, 28.7% reported WRMS at upper parts, while 16.5% reported WRMS at lower parts. Compared to low levels of job demand, its high levels were significantly associated with WRMS at both upper and lower parts of the body (OR=3.62, 95% CI=1.15~11.38; OR=3.60, 95% CI=1.04~12.39). Compared to low levels of occupational climate, its high levels were significantly associated with WRMS at upper parts of the body (OR=3.18, 95% CI=1.22~8.26). Conclusion: Among street sanitation workers, job stress may be a correlate of WRMS. Therefore, nursing strategies for reducing job stress are needed to prevent and manage WRMS.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.4 no.2
• /
• pp.168-179
• /
• 1994

In some ceramic industries, worker exposure to dust, crystalline free silica and lead were determined and evaluated. The conclusions are as follows. 1. Crystalline silica in bulk samples was 10.5 % in sanitary ware industry, 9.4 % in tile industry, and 2.1 % in ceramic insulator industry respectively. The free silica content of air filter sample was 8.03 % in table ware industry, 5.59 % in sanitary ware industry, and 1.32 % in ceramic insulator industry. Because silica content in ceramic dust is relatively high, it is should be considered silica as important factor in evaluating for ceramic industry. 2. The silica contents in dust from tile, sanitary ware and table ware industries are above 5%, it should be classified as "Type" 2 dust. 3. The airborne concentration of respirable crystalline silica was $27.9{\mu}g/m^3$ in a sanitary ware factory and $5.8{\mu}g/m^3$ in a ceramic insualtor factory. Three of ten samples sampled the above factories were exceeded the occupational exposure levels, $100{\mu}g/m^3$. 4. Geometric mean(GM) of total dust in 11 factories was $1.00mg/m^3$ and GM of respirable dust concentration in 5 factories was $0.33mg/m^3$. Sanitary ware industry had the highest concentration of total dust, $1.62mg/m^3$ and of respirable dust, $0.88mg/m^3$. 5. Average lead concentration in air was $0.05mg/m^3$ in glazing process of 2 factories manufacturing table ware. Five of ten sample(50%) were exceeded $0.05mg/m^3$. Therefore lead exposure in pottery industry should be considered as important problem.

• Quality Improvement in Health Care
• /
• v.22 no.2
• /
• pp.75-90
• /
• 2016

Objectives: This study measures the level of cognition of employee's patient safety culture and evaluates the current level through comparing the results to external levels. Ultimately it is performed to construct a strategic improvement plan through the basic database for patient's safety culture. Methods: A questionnaire survey of self reporting type was carried out using structured questionnaire of the patient's safety culture for employees currently employed in a hospital. Total responders was 1,129 and a response rate was 54.6%. The survey results were calculated with a percent positive response, and the current level was evaluated by comparing with the survey results of a hospital (2009 and 2014) and the survey result of The Agency for Healthcare Research and Quality(2014). Results: Sub-dimension of high percent positive response for each area were 'teamwork within hospital units' (80%), 'feedback & communication about error' (73%) and 'supervisor/manager expectations & actions promoting safety' (67%). Meanwhile, 'teamwork across hospital units' (31%), 'hospital management support for patient safety' (29%), 'staffing' (27%) and 'non-punitive response to error' (17%) were relatively low percent positive response. Compared to the survey results of AHRQ (2014) for each area, 'teamwork within hospital units' (80%), 'feedback & communication about error' (73%), 'frequency of event reporting' (66%) were at the top 50% percentile level and the remaining sub-dimensions showed a very low level in the lower 10% percentile area. Conclusion: In order to establish a system for patient safety culture within the hospital and evaluate the effect on this, it is necessary to periodically evaluate the patient's safety culture and establish regulations on hospital safety culture to comply with this.

• Journal of the Korean Society of Safety
• /
• v.38 no.2
• /
• pp.30-35
• /
• 2023

Acetone is a widely used Volatile Organic Compound (VOC) in industries and laboratories. However, acetone affects human health adversely and causes fires and explosions. Early acetone detection and improved personnel training in safety and emergency management are necessary to prevent acetone-related accidents. The multi-VOC acetone detectors used currently have a sensitivity and selectivity limit. In this study, we discovered that Pt-loaded iron oxide (a metal oxide semiconductor) conversely, has high detection and selectivity for very low-levels of acetone gas. The loaded Pt catalyzes the reaction between the sensing materials' surface and the oxygen molecules in the air; this optimizes acetone detection and can decrease acetone-related illnesses, fires and explosions.

• Advances in nano research
• /
• v.13 no.2
• /
• pp.121-134
• /
• 2022

Emerge of nanotechnology impacts all aspects of humans' life. One of important aspects of the nanotechnology and nanoparticles (NPs) is in the food production industry. The safety of such foods is not well recognized and producing safe foods using nanoparticles involves delicate experiments. In this study, we aim to incorporate intelligent computer simulation in predicting safety degree of nanofoods. In this regard, the safety concerns on the nano-foods are addressed considering cytotoxicity levels in metal oxides nanoparticles using adaptive neuro-fuzzy inference system (ANFIS) and response surface method (RSM). Three descriptors including chemical bond length, lattice energy and enthalpy of formation gaseous cation of 15 selected NPs are examined to find their influence on the cytotoxicity of NPs. The most effective descriptor is selected using RSM method and dependency of the toxicity of these NPs on the descriptors are presented in 2D and 3D graphs obtained using ANFIS technique. A comprehensive parameters study is conducted to observe effects of different descriptors on cytotoxicity of NPs. The results indicated that combinations of descriptors have the most effects on the cytotoxicity.

• Journal of the Korea Safety Management & Science
• /
• v.14 no.4
• /
• pp.93-105
• /
• 2012

The purpose of this study was to investigate drivers' postures in different car pedal systems and skilled levels under fatigue. Twenty four subjects participated in this experiment. For three-dimensional analyses, six cameras (Proreflex MCU-240, Qualisys) were used to acquire raw data. The parameters were calculated and analyzed with Visual-3D. In conclusion, ROAs of two leg-pedal system were less than one leg pedal system by pattern analysis. Through statistical tests, skilled levels have effects on ROAs(X, Y, Z) of ankle joint at breaking a pedal and ROAs(Y, Z) of ankle joint at accelerating a pedal. Also, car pedal systems have effects on ROAs(Y, Z) of ankle joint, and ROA(Z) of knee joint at accelerating a pedal. In addition, skilled levels and car pedal systems (cross effects) have an effect on ROA(Z) of ankle joint. These findings suggested that we should improve a present single pedal system.

• Safety and Health at Work
• /
• v.10 no.3
• /
• pp.305-313
• /
• 2019

Background: The oil and gas industry is one of the riskiest industries for confined space injuries. This study aimed to understand an overall picture of the causal factors of confined space accidents through analyzing accident reports and the use of a qualitative approach. Methods: Twenty-one fatal occupational accidents were analyzed according to the Human Factors Analysis and Classification System approach. Furthermore, thirty-three semistructured interviews were conducted with employees in different roles to capture their experiences regarding the contributory factors. The content analyses of the interview transcripts were conducted using MAXQDA software. Results: Based on accident reports, the largest proportions of causal factors (77%) were attributed to the organizational and supervisory levels, with the predominant influence of the organizational process. We identified 25 contributory factors in confined space accidents that were causal factors outside of the original Human Factors Analysis and Classification System framework. Therefore, modifications were made to deal with factors outside the organization and newly explored causal factors at the organizational level. External Influences as the fifth level considered contributory factors beyond the organization including Laws, Regulations and Standards, Government Policies, Political Influences, and Economic Status categories. Moreover, Contracting/Contract Management and Emergency Management were two extra categories identified at the organizational level. Conclusions: Preventing confined space accidents requires addressing issues from the organizational to operator level and external influences beyond the organization. The recommended modifications provide a basis for accident investigation and risk analysis, which may be applicable across a broad range of industries and accident types.