• 한국안전학회지
• /
• 제12권3호
• /
• pp.30-37
• /
• 1997

This paper deals with the residual stress of carburized spur gears is calculated being on the assumption that the main cause of residual stress is the volume difference between case and core due to the martensitic transformation in cooling. A formula is proposed to estimated the residual stress from the hardness and the amount of retained austenite. The estimated residual stress is close to the stress measured by X-ray method. The estimated residual stress is applied to the analysis of the fracture mechanics of carburized spur gear teeth. The stress intensity factor due to the residual stress is demonstrated. The stress intensity factor is computed by the influence function method, and it is shown that the factor is decreased by the residual stress in Carburized gear tooth.

• Geomechanics and Engineering
• /
• 제8권3호
• /
• pp.377-390
• /
• 2015

The governing equations of wave propagation in one dimension of elastic continuum materials are investigated by taking the influence of the initial stress into account. After a short review of the theory of elastic wave propagation in a rock mass with an initial stress, results indicate that the initial stress differentially influences P-wave and S-wave propagation. For example, when the initial stress is homogeneous, for the P-wave, the initial stress only affects the magnitude of the elastic coefficients, but for the S-wave, the initial stress not only influences the elastic coefficients but also changes the governing equation of wave propagation. In addition, the P-wave and S-wave velocities were measured for granite samples at a low initial stress state; the results indicate that the seismic velocities increase with the initial stress. The analysis of the previous data of seismic velocities and elastic coefficients in rocks under ultra-high hydrostatic initial stress are also investigated.

• 한국안전학회지
• /
• 제18권4호
• /
• pp.44-50
• /
• 2003

Design method for involute bevel gears is developed. The developed gear design system can design the optimized gear that minimize the number of pinion teeth with face tooth. Method of optimization is MS(matrix search) which is developed from this study. Design variables are pressure angle 20., transmitted power, gear volume, gear ratio, allowable contact stress and allowable bending stress. etc. Gears design method developed this study can be applied to the plane, helicopter, printer, machine tools.

• Safety and Health at Work
• /
• 제6권1호
• /
• pp.35-38
• /
• 2015

Background: Organizational changes that involve healthcare hospital departments and care services of health districts, and ongoing technological innovations and developments in society increasingly expose healthcare workers (HCWs) to work-related stress (WRS). Minimizing occupational exposure to stress requires effective risk stress assessment and management programs. Methods: The authors conducted an integrated analysis of stress sentinel indicators, an integrated analysis of objective stress factors of occupational context and content areas, and an integrated analysis between nurses and physicians of hospital departments and care services of health districts in accordance with a multidimensional validated tool developed in Italy by the National Network for the Prevention of Work-Related Psychosocial Disorders. The purpose of this retrospective observational study was to detect and analyze in different work settings the level of WRS resulting from organizational changes implemented by hospital healthcare departments and care services of health districts in a sample of their employees. Results: The findings of the study showed that hospital HCWs seemed to incur a medium level risk of WRS that was principally the result of work context factors. The implementation of improvement interventions focused on team development, safety training programs, and adopting an ethics code for HCWs, and it effectively and significantly reduced the level of WRS risk in the workplace. Conclusion: In this study HCW resulted to be exposed to occupational stress factors susceptible to reduction. Stress management programs aimed to improve work context factors associated with occupational stress are required to minimize the impact of WRS on workers.

• Safety and Health at Work
• /
• 제8권1호
• /
• pp.67-71
• /
• 2017

Background: Job stress and job satisfaction are important factors affecting workforce productivity. This study was carried out to investigate the job stress, job satisfaction, and workforce productivity levels, to examine the effects of job stress and job satisfaction on workforce productivity, and to identify factors associated with productivity decrement among employees of an Iranian petrochemical industry. Methods: In this study, 125 randomly selected employees of an Iranian petrochemical company participated. The data were collected using the demographic questionnaire, Osipow occupational stress questionnaire to investigate the level of job stress, Job Descriptive Index to examine job satisfaction, and Hersey and Goldsmith questionnaire to investigate productivity in the study population. Results: The levels of employees' perceived job stress and job satisfaction were moderate-high and moderate, respectively. Also, their productivity was evaluated as moderate. Although the relationship between job stress and productivity indices was not statistically significant, the positive correlation between job satisfaction and productivity indices was statistically significant. The regression modeling demonstrated that productivity was significantly associated with shift schedule, the second and the third dimensions of job stress (role insufficiency and role ambiguity), and the second dimension of job satisfaction (supervision). Conclusion: Corrective measures are necessary to improve the shift work system. "Role insufficiency" and "role ambiguity" should be improved and supervisor support must be increased to reduce job stress and increase job satisfaction and productivity.

• Safety and Health at Work
• /
• 제2권4호
• /
• pp.365-374
• /
• 2011

Objectives: This study was designed to investigate whether long-term, low-level exposure to monocyclic aromatic hydrocarbons (MAHs) induced insulin resistance. Methods: The subjects were 110 male workers who were occupationally exposed to styrene, toluene, and xylene. One hundred and ten age-matched male workers who had never been occupationally exposed to organic solvents were selected as a control group. Cytokines, which have played a key role in the pathogenesis of insulin resistance, and oxidative stress indices were measured. Assessment of exposure to MAHs was performed by measuring their ambient levels and their urinary metabolites in exposed workers, and the resulting parameters between the exposed group and non-exposed control groups were compared. Results: There was no significant difference in general characteristics and anthropometric parameters between the two groups; however, total cholesterol, fasting glucose, fasting insulin, and homeostasis model assessment of insulin resistance levels were significantly higher in the exposed group. Phenylglyoxylic acid levels showed significant association with tumor necrosis factor-${\alpha}$, total oxidative status, and oxidative stress index via multiple linear regression analysis. Further, there was a negative correlation between methylhippuric acid levels and total anti-oxidative capacity, and there was a significant relationship between MAHs exposure and fasting glucose levels, as found by multiple logistic regression analysis (odds ratio = 3.95, 95% confidence interval = 1.074-14.530). Conclusion: This study indicated that MAHs increase fasting glucose level and insulin resistance. Furthermore, these results suggested that absorbing the organic solvent itself and active metabolic intermediates can increase oxidative stress and cytokine levels, resulting in the changes in glucose metabolism and the induction of insulin resistance.

• 한국안전학회지
• /
• 제32권4호
• /
• pp.73-78
• /
• 2017

In this study, the risk level of architectural works was calculated by applying work period and number of input workers based on accidents records from 2012 to 2014 and the architectural works were divided into four groups(High-High, High-Low, Low-High, Low-Low) according to risk levels of fatal accidents and loss time accidents. And then questionnaire on the job stress level of workers was performed for 670 workers working in the architectural work using Korean Occupational Stress Questionnaire Form developed by KOSHA. And then the relationship between the risk level and job stress level of four groups was analyzed. Results showed that 1) risk levels of fatal and loss time accidents applied by work period and input workers were analyzed to be different with those of previous research based on the number of fatal and loss time accidents; 2) job stress level of workers has been analyzed to have a significant relationship with the risk level of fatal and loss time accident; 3) specially, the average of job stress level of 'HH(High-High)' group was higher than those of other groups; 4) among the subfactors of job stress, interpersonal conflict, job insecurity, organizational system and lack of reward were analyzed to be key factors to affect the risk level.

• 한국안전학회지
• /
• 제28권3호
• /
• pp.100-106
• /
• 2013

According to the Statistics Korea, in 2011, people over the age of 65 years old accounted for 11.8% of Korea's population. This number is expected to rise to 15.0% by 2019, making Korea an "aged society". As age increases, physical ability degrades to the point that the workload must be adjusted limitations. However, workloads are given regardless of workers' ages or abilities. In addition, a decline in work efficiency due to aging also increases the risk of work-related injuries. Furthermore, the cases of stress related diseases along with musculoskeletal disorders(MSDs) rise as main factors of industrial disasters and excessive job stress gives negative influence not only on mental health but also on physical health so that job stress becomes a hot issue as a main cause of work ability falloff and turnover. The purpose of this research is to examine how the sociodemographic characteristics, MSDs symptoms and musculoskeletal workload of workers in the manufacturing industry of automobile parts influence work ability and job stress. As a result of the research, job ability showed significant differences statistically according to age, working year, sex, marital status and musculoskeletal workload and job stress showed significant differences statistically according to age, working year, marital status and musculoskeletal workload. In addition, it showed that as the worker's job ability decreases, job stress increases.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2008년도 추계학술대회
• /
• pp.329-341
• /
• 2008

The psychosocial stress and musculoskeletal disorders(MSDs) have been one of major health problems for hospital workers. This study tried to understand the relationship between symptoms associated with MSDs and risk factors such as working posture, job stress, psychosocial stress and fatigue. A total number of 655 hospital workers participated in this study. Specifically, REBA was applied for evaluating working posture and a checklist prepared by KOSHA(Korean Occupational Safety and Health Agency) was used for symptom survey. A questionnaire from KOSHA was also used for collecting data associated with job stress, psychosocial stress and fatigue. All these data were formulated and modeled by path analysis which was one of major statistical tools in this study. Specifically, path analysis for the data we collected came up with several major findings. The risk scores from working posture based on REBA had indirect effects via fatigue factor(MFS) as well as direct effects on symptoms. The factors associated with job stress(KOSS) and psychosocial stress(PWI-SF) had significant effects on symptoms. Specifically, indirect effect of job stress factors via fatigue factors(MFS) had bigger than that of direct effect of job stress on symptom.

• 한국안전학회지
• /
• 제33권5호
• /
• pp.1-8
• /
• 2018

A fuel cell is an energy conversion device that converts a chemical energy directly into an electrical energy and has higher energy efficiency than an internal combustion engine, but solid oxide fuel cell (SOFC) consisting of brittle ceramic material remains as a major issue regarding the mechanical properties as the crack formation and propagation. In this study, the stress distribution and crack behavior around the crack tip were evaluated, due to investigated the effects of the surface crack at the operating condition of high temperature. As a result, the difference of the generated stress was insignificant at operating conditions of high temperature according to the surface crack length changes. This is because, the high stiffness interconnect has a closed structure to suppress cell deformation about thermal expansion. The stress intensity factor ratio $K_{II}/K_I$ increased as the crack depth increased, at that time the effect of $K_{II}$ is larger than that of $K_I$. Also the maximum stress intensity factor increased as the crack depth increased, but the location of crack was generated at the electrolyte/anode interface, not at the crack tip.