• Journal of Applied Reliability
• /
• v.15 no.3
• /
• pp.207-215
• /
• 2015

Safety' can be used in a variety of ways and may also have different meanings when used in theoretical field and routinely used. In this paper, the 'safety' means that human injury, fire or physical accident condition does not occur while used by the end-user. The meaning of safety may be different by era and culture. Even in contemporary era, the meaning can be used differently by country, region and culture. As the rights of consumers are increasingly reinforced, we can expect the acceptable risk or safety level can rise higher. In this paper, the R-map of Japan and the European risk assessment guidelines (RAPEX) were reviewed considering domestic incidents database status and its applicability. Because it is difficult to make a model based on a R-map, a revised model was developed mainly based on European Assessment Model with a combination of the important characteristics of Japan model R-map. Also utilizing this revised model, the availability as a new risk assessment model was confirmed by comparing the test results for the same scenarios to the other risk assessment model (RAPEX/RAG).

• Journal of the Korean Society of Safety
• /
• v.27 no.2
• /
• pp.72-77
• /
• 2012

There are insufficient models that find problems and solutions for accident prevention through risk assessment and suggest safe work process and work instruction from foundation works to finish work for accident decrease. This paper presents a quantitative risk assessment model by analysis of risk factors in each process such as earth works, drainage works, pavement works, appurtenant works and etc based on accident examples and investigation on actual condition in roads construction work. In addition, the safety management system was developed to perform risk assessment of construction and use it for effective safety training for labor.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.4
• /
• pp.105-112
• /
• 2015

Sawmilling industry remained a high risk with the average 4.73% of industrial accidents in 2010-2012 that was eight times that of general manufacturing. Sawmilling industry had 200 industrial accidents victim in average. Manufacturing process in sawmill industry contained dangerous machinery such as conveyors, roller, saw ( band saw, circular saw) etc. It may be effective to figure out the type of industrial accidents occurred in the past and extend risk assessment which can predict hazard such as near miss when implementing exposure or potential dangers in sawmill industry. This study conducted research on the actual condition on the place of industrial accident occurrence, detailed work and contact object when injured, and injured part targeting 643 businesses which had industrial accidents in 2010-2012. As the results, RPN of general sawmill industry was the highest 'ganglip saw' with 36,157. RPN of the following order were 'moving truck' with 25,454, 'special machining operations' with 22,283. Also, probability of general sawmill industry was a lots within 1 year, while risk appeared a lots within 5 years. So, risk assessment shall be needed to emphasis on accident prevention of sawmill industry. And additional work will be needed on the risk assessment in hazard prevention work of supervisors.

• Journal of the Korea Safety Management & Science
• /
• v.16 no.3
• /
• pp.9-22
• /
• 2014

Constructions sites are affected by Diversity workplace, complexity of construction, Change of place, Mobility of workers and so on. In a single establishment, Prime contractors and subcontractors have to conduct their work at the same time. There are a lot of unpredictable risks when the construction is running, coordination between contractors is very important to do a risk assessment under the condition. Large Construction companies were investigated by previous studies. Survey research is applied to the risk assessment. In the writing, Risk assessment of the entire lower level. Because of the low level of risk factors to find. Also, There was a limit to investigate accidents. Confirmed that Effort to derive a risk factors were desperately of the risk assessment. Results were obtained through previous studies. The PCM is several experts should be joined. Experts Site Manager, Supervisor, Safety Manager, Director Contractor, Work team leader is required to participate. Construction plans, Process Planning to the risk find beforehand. And Determines how the operations and the control. Also, Made it into the database. and PCRA can be used in the risk assessment was developed.

• Toxicological Research
• /
• v.28 no.2
• /
• pp.73-79
• /
• 2012

While the ability to develop nanomaterials and incorporate them into products is advancing rapidly worldwide, understanding of the potential health safety effects of nanomaterials has proceeded at a much slower pace. Since 2008, Korea Food and Drug Administration (KFDA) started an investigation to prepare "Strategic Action Plan" to evaluate safety and nano risk management associated with foods, drugs, medical devices and cosmetics using nano-scale materials. Although there are some studies related to potential risk of nanomaterials, physical-chemical characterization of nanomaterials is not clear yet and these do not offer enough information due to their limitations. Their uncertainties make it impossible to determine whether nanomaterials are actually hazardous to human. According to the above mention, we have some problems to conduct the human exposure risk assessment currently. On the other hand, uncertainty about safety may lead to polarized public debate and to businesses unwillingness for further nanotechnology investigation. Therefore, the criteria and methods to assess possible adverse effects of nanomaterials have been vigorously taken into consideration by many international organizations: the World Health Organization, the Organization for Economic and Commercial Development and the European Commission. The object of this study was to develop risk assessment principles for safety management of future nanoproducts and also to identify areas of research to strengthen risk assessment for nanomaterials. The research roadmaps which were proposed in this study will be helpful to fill up the current gaps in knowledge relevant nano risk assessment.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.05a
• /
• pp.291-292
• /
• 2021

In modular construction, it is insufficient for safety management of workers, and workers are still exposed to the risk of accidents due to work at high places for lifting and assembly work in modular construction sites. Therefore, it is necessary when preventive safety management through risk management of workers on modular construction sites. This study is a basic study for the risk assessment(checklist) of modular construction, and the purpose of this study is to analyze the risk factors of the module lifting work at the modular construction site. It is intended to identify the hazard risk factors and improvement measures of the existing lifting operation, by analyzing the case of the risk assessment of the existing RC method, and to identify the risk factors for each work process when lifting the module. In the future, the results of this study are expected to be utilized in the development of checklists for risk assessment as safety management plan for modular construction sites.

• Proceedings of the Safety Management and Science Conference
• /
• 2013.04a
• /
• pp.445-456
• /
• 2013

According to Department of labor guideline "2012-104 (2012.9.26.)" This study is to suggest the basic information and the improvement for the application of risk assessment on a construction site by group interview & survey of construction worker who is the practice of the subject and then numerical analysis about awareness and action plan of Safety and health. The result of group interview and survey of construction worker, most of construction worker feel the danger during the work. Then construction worker analysis results that risk assessment helps to change & raise awareness of safety and reduce an industrial disaster. Easy Safety management activity such as TBM & safety education active will be necessary for safe worksite and then I suggest the TBT(tool box talk) active which combines TBM & safety education.

• Journal of the Korean Society of Safety
• /
• v.34 no.4
• /
• pp.111-118
• /
• 2019

Accidents occurring due to natural disasters in chemical process facilities where technologies are concentrated can cause secondary damage. The concept of the relationship between natural disasters and highly intensive technologies has evolved into the Natech (Natural Hazards Triggered Technological Disaster) research. Currently, the number of earthquakes is increasing all over the Korean peninsula. To assess the risk of Natech when an earthquake has occurred in South Korea, the Rapid Natech Risk Assessment Tool (RAPID-N) developed by the European Commission's Joint Research Center (EC JRC) was used in the present study. The RAPID-N can be used for Natech risk assessment based on mapping and can be utilized for sufficient preparation for reduction of the effects of Natech accidents. A total of 261 chemical facilities actually existing in Pohang were initially analyzed to select eight facilities and the Pohang earthquake that occurred in 2017 was implemented in the RAPID-N utilizing the shake map. High risk areas were selected through Natech risk assessments for the selected eight work places and countermeasures for the areas were suggested. High risk areas exist depending on the location, since the damage influence ranges could be overlapped and each chemical facility has an independent probability of Natech. Therefore, studies on Natech emergency plans and emergency evacuation routes should be actively conducted considering such high risk areas. The present study was conducted to demonstrate the feasibility of Natech risk assessment in South Korea through the RAPID-N. These findings can be used as a reference material to lay a foundation for Natech risk assessment and related policies in South Korea.

• Toxicological Research
• /
• v.30 no.1
• /
• pp.39-44
• /
• 2014

Bisphenol A (BPA) is widely used in the production of polycarbonate plastics, epoxy resins, and food and beverage containers. In the present study, we aimed to investigate the relationship between urinary concentrations of BPA and waist circumference in Korean adults. A total of 1,030 Korean adults (mean age, $44.3{\pm}14.6$ years) were enrolled in the study on the integrated exposure to hazardous materials for safety control, conducted by the Ministry of Food and Drug Safety from 2010 to 2012. Abdominal obesity was defined as having a waist circumference of at least 90 cm and 85 cm for men and women, respectively. The participants were divided into 4 groups according to the urinary BPA concentration quartile. Waist circumference was significantly higher among subjects with a urinary BPA concentration in the highest quartile relative to those in the lowest quartile (p = 0.0071). Linear regression analysis revealed a significant positive association between urinary BPA concentrations and body mass index, body fat, after adjusting for potential confounders. Moreover, subjects with urinary BPA concentrations in the fourth quartile were more likely to be obese compared to those with urinary BPA concentrations in the first quartile (odds ratio, 1.938; 95% CI: 1.314~2.857; p for trend = 0.0106). These findings provide evidence for a positive association between urinary BPA concentration and waist circumference in Korean adults.

• Journal of the Society of Disaster Information
• /
• v.19 no.3
• /
• pp.719-728
• /
• 2023

Purpose: Mobile cranes are machines that contribute to high mortality, and the High Risk Factor (SIF) information, which analyzed 2,574 accidental deaths in the construction industry in the past 6 years (2016~2021), resulted in a total of 61 mobile crane accidents. Despite safety measures in the field, it is not used properly. In this study, we present standard risk assessment indicators that contribute to accident prevention. Method: Through expert interviews, fatal accident case analysis, field analysis, and literature research, we present the standard risk assessment index method of the 4M risk assessment method. Result: As a result of analyzing the risk assessment of eight sites, it was concluded that it cannot make a significant contribution to disaster prevention and should be applied as an improvement measure of the Standard Risk Assessment Index Law. Conclusion: Switching to the standard risk assessment index method at construction sites has been proposed to make it easier for health and safety personnel and workers to use, contributing to the reduction of accidents.