• Journal of Korea Water Resources Association
• /
• v.55 no.1
• /
• pp.71-84
• /
• 2022

The objective of this study is to develop a two-dimensional (2D) flood model that can perform accurate flood analysis with simple input data. The 2D flood inundation models currently used to create flood forecast maps require complex input data and grid generation tools. This sometimes requires a lot of time and effort for flood modeling, and there may be difficulties in constructing input data depending on the situation. In order to compensate for these shortcomings, in this study, a grid-based model that can derive accurate and rapid flood analysis by reflecting correct topography as simple input data was developed. The calculation efficiency was improved by extending the existing 2×2 sub-grid model to a 5×5. In order to examine the accuracy and applicability of the model, it was applied to the Gamcheon Basin where both urban and river flooding occurred due to Typhoon Rusa. For efficient flood analysis according to user's selection, flood wave propagation patterns, accuracy and execution time according to grid size and number of sub-grids were investigated. The developed model is expected to be highly useful for flood disaster mapping as it can present the results of flooding analysis for various situations, from the flood inundation map showing accurate flooding to the flood risk map showing only approximate flooding.

• Journal of the Korea Computer Graphics Society
• /
• v.29 no.5
• /
• pp.21-30
• /
• 2023

Accurate segmentation of the kidney tumor is necessary to identify shape, location and safety margin of tumor in abdominal CT images for surgical planning before renal partial nephrectomy. However, kidney tumor segmentation is challenging task due to the various sizes and locations of the tumor for each patient and signal intensity similarity to surrounding organs such as intestine and spleen. In this paper, we propose a semi-supervised learning-based mean teacher network that utilizes both labeled and unlabeled data using a kidney local guided map including kidney local information to segment small-sized kidney tumors occurring at various locations in the kidney, and analyze the performance according to the kidney tumor size. As a result of the study, the proposed method showed an F1-score of 75.24% by considering local information of the kidney using a kidney local guide map to locate the tumor existing around the kidney. In particular, under-segmentation of small-sized tumors which are difficult to segment was improved, and showed a 13.9%p higher F1-score even though it used a smaller amount of labeled data than nnU-Net.

• Food Science and Industry
• /
• v.51 no.3
• /
• pp.209-217
• /
• 2018

Delphi technique is widely used to develop consensus on group opinion. It is important to identify the strategic technologies and evaluate technology level for the establishment of national R&D policy to upgrade technology level. The aim of this article was to reflect on Food Safety technology level by using Delphi methodology. And, competitiveness of patents and journal articles is evaluated for Korea, USA, Japan, China and EU. As a result, USA is the most competitive country for all technology categories. The average technology level of Korea was 79.5% of world-top coungry and average technological gap was 6.1 years. Korea is grouped in middle-lower class for overall food safety technology level. However, there are some variances among the level of technologies. As a result of this study, food safety research management needs to expand R&D investment and training of food safety specialist. The results of this research can be utilized to establish a road map for transportation R&D and plans.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.14 no.3
• /
• pp.78-95
• /
• 2011

This study has developed various DEMs with different spatial resolutions using many different interpolation methods with the aid of a 1:5,000 digital map. In addition, this study has evaluated the vertical accuracy of various DEMs constructed by check point data obtained from the network RTK GPS survey. The obtained results suggest that a DEM developed from the TIN-based Terrain method performs well in evaluating height restriction of buildings in a flying safety area considering general RMSE values, land-type RMSE values and profile evaluation results, etc. And, it has been found that three meters is the right spatial resolution for a DEM in evaluating height restriction of buildings in a flying safety area. Meanwhile, elevation values obtained by the DEM are not point estimation values but interval estimation values. This can be used to check whether the height of buildings in the vicinity of an airfield violates height limitation values of the area. To check whether the height of buildings measured in interval estimation values violates height limitation values of the area, this study has adopted three steps: 1) high probability of violation, 2) low probability of violation, 3) inconclusiveness about the violation. The obtained results will provide an important basis for developing a GIS related to the evaluation of height restriction of buildings in the vicinity of an airfield. Furthermore, although results are limited to the study area, the vertical accuracy values of the DEM constructed from a two-dimensional digital map may provide useful information to researchers who try to use DEMs.

• The Korean Journal of Air & Space Law and Policy
• /
• v.24 no.2
• /
• pp.69-104
• /
• 2009

This study is to know the Enhancement of Aviation Safety for Low Cost Carrier in Korea through the long and mid term air safety policy. Especially, the aviation safety authorities of the developed countries in aviation establish action plans under the system plan of central government. Then the countries implement those plans systematically to the related aviation business so that they promote efficient air safety policy implementation. At this time, the Korean government should present the vision about an air safety and systematic strategic plan to cope with the future aviation industry change. Also, it is needed to establish a specific aviation safety action plan. Namely, an air safety master plan and long-term road map must be established. This paper deduces some implications through the abroad cases of aviation safety plan, and then tries to find the applying method of the implications to Korea in the rapidly changing aviation market in the 21st century. It is expected that this paper will help the Korean aviation industry to play a major role in the future. In oder to get suggestions aviation policies of advanced countries with regard to aviation safety, we have looked at the aviation policies of the U.S., the U.K., Australia and Japan, and also LCC's states overseas, LCC's safety policies in Korea, and aviation safety status. Since existing LCCs and new LCCs based in Korea have become the new concept, this new market for LCC has been booming recently. Around Southeast Asia, while there are some LCCs including Air Asia which is supported by the government of Malaysia with emphasis on safety, there are other LCCs, which have failed to achieve confidence in safety and have led to aircraft accidents and financial mismanagement, so we need to verify the safety of overseas LCCs, try to improve domestic LCCs in order to fly international routes and aid international aviation safety. LCCs have been increasing lately thanks to open skies policy and a wide variety of flights.lines. Air Busan, Jin Air, Jeju air, Eastar Air are in service. so the risk of new potential hazards may increase. Therefore it is necessary to take the initiative in aviation markets inside and outside of Korea and the safety management of new LCCs should be taken more seriously than ever before. Among overseas aviation safety policies, we need to implement the FAA's Filght Plan which has a specific Business Plan. I hope this thesis will help improve aviation safety locally and internationally.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.9 s.351
• /
• pp.128-134
• /
• 2006

Traffic information protocol in DMB is very different from existing analog broadcasting and wireless communication network. In this paper, we examined whether traffic information protocol of Europe Broadcasting Union(TPEG) is applicable to domestic DMB. Also, we proposed a division of classification on kinds of franc information, and related data that it is required to transmit traffic information of TPEG form. We composed of experiment equipment and studied whether is expressed traffic informations as like accident, event, traffic condition and CCTV image on car navigation system. The results obtained it can be given expression to phrases from TPEG streaming data and to link with electronics map by decoding TPEG straming data. Also it can be expressed CCTV and graphic image which is composed of TPEG form.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.6
• /
• pp.670-678
• /
• 2018

In coastal waters where the traffic volume of the ship is high, there is a high possibility of a collision accident because complicated encounter situations frequently occurs between ships. To reduce the collision accidents at sea, a quantitative collision risk assessment is required in addition to the navigator's compliance with COLREG. In this study, a new collision risk assessment system was developed to evaluate the collision risk on ship's planned sailing routes. The appropriate collision risk assessment method was proposed on the basis of reviewing existing collision risk assessment models. The system was developed using MATLAB and it consists of three parts: Map, Bumper and Assessment. The developed system was applied to the test sea area with simple computational conditions for testing and to actual sea areas with real computational conditions for validation. The results show the length of own ship, ship's sailing time and sailing routes affect collision risks. The developed system is expected to be helpful for navigators to choose the optimum safe route before sailing.

• Korean Journal of Health Education and Promotion
• /
• v.24 no.1
• /
• pp.93-108
• /
• 2007

Background: School is a primary health education setting for children and the continuous support should be provided to renew school health education curriculum correspondent to socio-cultural changes in Korean society. Objectives: This study was conducted to identify the principals' and teachers' needs of health education topics for their students and to analyze their conceptual map for health education curriculum in Korean elementary school. Methods: The sample size of the first survey was 179 and that of the second survey was 691 of elementary school principals and teachers from stratified sampling over Korea. The self-administered mailing survey was conducted to o identify the factor structure of the health education topics and to analyze the conceptual properties with exploratory factor analysis and multidimensional scaling analysis in SPSS 12.0. Results: A total of 21 health education topics were collected from the first survey and 31 topics were, comprehensively, generated for the second survey. The five factors were determined: 'life health promotion behavior,' 'drug control and mental health,' 'bulling and aggression prevention,' 'safety perception and injury prevention,' and 'sex education and sexual harassment.' The educational need scores were the highest in 'safety perception and injury prevention.' The two-dimensional cooperates were generated for the 31 health education topics and the two dimensional properties which divided the conceptual space were 'health-safety' for one and 'public/environmental-individual/personal' for the other. Conclusions: Health education curriculum and textbook should be developed considering teachers' needs and conditions for health education in school fields. The field-based health education programs or textbook would make more possible problem-solving health education for children in real school fields.

• Journal of the Korean Society of Safety
• /
• v.28 no.4
• /
• pp.26-32
• /
• 2013

A digital image correlation(DIC) method is a whole-field measurement technique that acquires surface displacements and strains from images information which characterized a random speckle as intensity grey levels. Recently years, this DIC method is being developed and used increasingly in various research. In this study, we tried to apply to aluminum alloy(Al 6061-T6) using DIC method and strain gauge. DIC results demonstrated the usefulness and ability to determine a strain. The test specimen used in this study was an aluminum alloy(Al 6061-T6, thickness 1 mm). For a strain measurement, a strain gauge was attached at the center of a specimen. A specimen was lightly sprayed with a white paint and a black dot pattern was sprayed on its fully dried white surface to obtain a random speckle. The experimental apparatus used to perform the tensile test consisted of universal dynamic tester(5 kN; T.O. Co.) under displacement speed of 0.5, 1.0 and 3.0 mm/min. A Model 5100 B Scanner(V. Co.) used to obtain a strain. A CCD camera connected to a PC uses to record the images of the specimen surface. After acquisition, the images were transferred to PC where the DIC software was implemented. An acquired image was evaluated by the DIC program. DIC method for displacement and strain was suggests and it results show a good consistent remarkably. DIC results demonstrated the usefulness and ability to determine surface strain was better than by using classical measurements. The strain field measurement using a DIC is so useful that it can be applied to map strain distributions at a full area. DIC method can evaluate a strain change so it can predict a location of fracture. The findings of the investigation suggest that the DIC method is an efficient and reliable tool for full-field monitoring and detailed damage characterization of materials.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.5
• /
• pp.564-570
• /
• 2014

This paper propose a method to detect and track a human face using depth information as well as color images for detection of drowsy driving. It consists of a face detection procedure and a face tracking procedure. The face detection procedure basically uses the Adaboost method which shows the best performance so far. But it restricts the area to be searched as the region where the face is highly possible to exist. The face detected in the detection procedure is used as the template to start the face tracking procedure. The experimental results showed that the proposed detection method takes only about 23 % of the execution time of the existing method. In all the cases except a special one, the tracking error ratio is as low as about 1 %.