• Title/Summary/Keyword: Safety Estimation

Search Result 1,650, Processing Time 0.032 seconds

Estimation of the Value of Green Cars Permission on Exclusive Bus Lane of Yeongdong Expressway Using a CVM Method (CVM을 이용한 영동고속도로 버스전용차로 내 친환경차 주행 허가에 대한 가치 추정)

  • Kim, Inyoung;Park, Sangmin;Kim, Kyung Hyun;Lee, Hwanpil;Yun, Ilsoo
    • The Journal of The Korea Institute of Intelligent Transport Systems
    • /
    • v.20 no.2
    • /
    • pp.1-14
    • /
    • 2021
  • The exclusive bus lanes in the Yeongdong Expressway were implemented in the Singal to Yeoju section in 2017, but the capacity of both exclusive bus lanes and general-purpose lanes of the Yeongdong Expressway decreased and the travel time increased, reducing it to the Singal to Deokpyeong section. Therefore, it is necessary to increase the efficiency of exclusive bus lanes to revitalize public transportation and improve environmental problems. This study calculated the willingness to pay and the social benefits of permission for Green cars to drive on exclusive bus lanes in Yeongdong Expressway. A survey was conducted on two groups of Green car users and Expressway users, and the willingness to pay was estimated using the CVM method. As a result, the average WTP of Green car users were estimated to be 218.7(won/km·person), and that of Expressway users were estimated to be approximately 235.5(won/km·person). The direct benefits were estimated to be approximately 7.9 billion won for Green car users, and 8.5 billion won for Expressway users in 2019. Finally, the value of time saving was estimated to be approximately 8.0 billion won.

Estimating milk production losses by heat stress and its impacts on greenhouse gas emissions in Korean dairy farms

  • Geun-woo, Park;Mohammad, Ataallahi;Seon Yong, Ham;Se Jong, Oh;Ki-Youn, Kim;Kyu-Hyun, Park
    • Journal of Animal Science and Technology
    • /
    • v.64 no.4
    • /
    • pp.770-781
    • /
    • 2022
  • Meteorological disasters caused by climate change like heat, cold waves, and unusually long rainy seasons affect the milk productivity of cows. Studies have been conducted on how milk productivity and milk compositions change due to heat stress (HS). However, the estimation of losses in milk production due to HS and hereby environmental impacts of greenhouse gas (GHG) emissions are yet to be evaluated in Korean dairy farms. Dairy milk production and milk compositions data from March to October 2018, provided by the Korea Dairy Committee (KDC), were used to compare regional milk production with the temperature-humidity index (THI). Raw data for the daily temperature and relative humidity in 2018 were obtained from the Korea Meteorological Administration (KMA). This data was used to calculate the THI and the difference between the maximum and minimum temperature changing rate, as the average daily temperature range, to show the extent to which the temperature gap can affect milk productivity. The amount of milk was calculated based on the price of 926 won/kg from KDC. The results showed that the average milk production rate was the highest within the THI range 60-73 in three regions in May: Chulwon (northern region), Hwasung (central region), and Gunwi (southern region). The average milk production decreased by 4.96 ± 1.48% in northern region, 7.12 ± 2.36% in central region, and 7.94 ± 2.57% in southern region from June to August, which had a THI range of 73 or more, when compared to May. Based on the results, the level of THI should be maintained like May. If so, the farmers can earn a profit of 9,128,730 won/farm in northern region, 9,967,880 won/farm in central region, and 12,245,300 won/farm in southern region. Additionally, the average number of cows raised can be reduced by 2.41 ± 0.35 heads/farm, thereby reducing GHG emissions by 29.61 ± 4.36 kg CO2eq/day on average. Overall, the conclusion suggests that maintaining environmental conditions in the summer that are similar to those in May is necessary. This knowledge can be used for basic research to persuade farmers to change farm facilities to increase the economic benefits and improve animal welfare.

Analysis of Operation System Establishment Cases for Efficient use of Risk Assessment at Construction Sites - H Focusing on Construction Company Cases (건설현장의 위험성평가 효율적 활용을 위한 운영 시스템 구축사례 분석 - H 건설사 사례중심으로)

  • Jae-Bung Lee
    • Journal of the Society of Disaster Information
    • /
    • v.18 no.4
    • /
    • pp.828-838
    • /
    • 2022
  • Purpose: Through the establishment of a computerized system of risk assessment, the purpose is to analyze the case of whether the co-workers who are subject to the risk assessment at the construction site can easily fill it out and expect disaster reduction through efficient risk assessment activities. Method: By providing the risk factors and safety measures for the work by selecting the type of work, the risk estimation and the establishment of countermeasures can be made, and a system has been established to enable practical disaster prevention activities by presenting disaster cases for the work. Result: Through the analysis of the change in the scaled disaster rate for the years following the on-site application after the establishment of the risk assessment computer system of H Construction Company, it was confirmed that the scaled disaster rate of the domestic construction industry increased, while the conversion disaster rate of H Construction Company decreased. Conclusion: Through the computational systemization of risk assessments, workers in the field can easily access the risk assessment, evaluate the risk factors of the process and establish risk prevention measures, and it has been analyzed that there is an impact on the reduction of the disaster rate during the operational analysis period.

Post-Quantum Security Strength Evaluation through Implementation of Quantum Circuit for SIMECK (SIMEC 경량암호에 대한 양자회로 구현 및 Post-Quantum 보안 강도 평가)

  • Song Gyeong Ju;Jang Kyung Bae;Sim Min Joo;Seo Hwa Jeong
    • KIPS Transactions on Computer and Communication Systems
    • /
    • v.12 no.6
    • /
    • pp.181-188
    • /
    • 2023
  • Block cipher is not expected to be safe for quantum computer, as Grover's algorithm reduces the security strength by accelerating brute-force attacks on symmetric key ciphers. So it is necessary to check the post-quantum security strength by implementing quantum circuit for the target cipher. In this paper, we propose the optimal quantum circuit implementation result designed as a technique to minimize the use of quantum resources (qubits, quantum gates) for SIMECK lightweight cryptography, and explain the operation of each quantum circuit. The implemented SIMECK quantum circuit is used to check the estimation result of quantum resources and calculate the Grover attack cost. Finally, the post-quantum strength of SIMECK lightweight cryptography is evaluated. As a result of post-quantum security strength evaluation, all SIMECK family cipher failed to reach NIST security strength. Therefore, it is expected that the safety of SIMECK cipher is unclear when large-scale quantum computers appear. About this, it is judged that it would be appropriate to increase the block size, the number of rounds, and the key length to increase the security strength.

Investigation Study on Underground Cavity Scale Estimation Based on GPR Exploration (지하공동 규모 평가를 위한 GPR 탐사 기반의 조사 연구)

  • Byoung-Jo Yoon;Han-Joo Lim;Yeon-Gyu Kim
    • Journal of the Society of Disaster Information
    • /
    • v.19 no.3
    • /
    • pp.737-746
    • /
    • 2023
  • Purpose: Ground subsidence due to cavity can bring about various problems, such as casualties, decrease of the safety of the structures, and indirect social costs. Therefore, ground subsidence should be prevented through the exploration and recovery of the cavity under the pavements. Method: In this study, GPR exploration method was carried out on both actual roadway and mock-up site to compensate for the problems caused by excavation and restoration process. Result: This study compared the cavity scales obtained from GPR exploration results and the direct excavation of the identified cavity. It was confirmed that the predicted soil depth by GPR exploration was similar to the identified soil depth, but the predicted cavity scale by GPR exploration overestimated the longitudinal and cross-sectional widths compared to the identified cavity scale. Conclusion: Based on the correlation between the predicted cavity scales by GPR exploration, it is possible to qualitatively estimate the cavity scales using the empirical formula proposed in this study.

Estimation of Road Crash Reduction by Installing Automatic Emergency Braking Systems for Elderly Drivers (자동긴급제동장치의 고령운전자 추돌사고 감소 효과 추정)

  • Sangjin Han;Eunwoo Kim;Hyoseok Jang;Jongwan Joo
    • The Journal of The Korea Institute of Intelligent Transport Systems
    • /
    • v.22 no.1
    • /
    • pp.161-171
    • /
    • 2023
  • It is largely agreed that elderly drivers (over 64 years) are more likely to cause fatal crashes than other age groups. According to national road crash statistics 2021, the number of road fatalities per 10,000 drivers over 64 years old was 1.77, while that of drivers in their 30s was 0.55. This indicates a 2.67 times higher probability of causing crashes among the former than the latter. The current study estimates how rear-end crashes may be reduced by installing Automatic Emergency Braking Systems (AEBS), particularly for elderly drivers. We analyzed data from Samsung Fire & Marine Insurance. The results show that the Odds Ratio of rear-end crash occurrence between vehicles with AEBS and without AEBS is 0.75, implying there were lesser rear-end crashes in the vehicles installed with AEBS. The Odds Ratio of male drivers was determined to be 0.78, which was lesser than the 0.81 Odds Ratio obtained for female drivers. Elderly drivers who had installed AEBS in their vehicles showed an Odds Ratio of 0.76, implying crash reduction. In particular, the Odds Ratio of male elderly drivers was found to be the lowest at 0.49. We believe incentivizing by giving discounted insurance premiums to the elderly who drive vehicles installed with AEBS will help reduce rear-end crashes.

Estimation of Appropriate Wage by Development of Wage Survey Framework for Forest Workers (산림사업 작업자 임금실태조사 프레임워크 개발을 통한 적정 노임단가 추정)

  • Hye-in Park;Cham Kim;Sung-Min Choi
    • Journal of Korean Society of Forest Science
    • /
    • v.112 no.2
    • /
    • pp.217-229
    • /
    • 2023
  • Forest projects often apply construction industry labor rates, without considering the demanding work conditions and labor intensity unique to forest operations, resulting in workplace issues. This study aims to analyze forest operations' characteristics and wage survey methods in other fields to establish a framework for surveying the wages of forest workers. The developed framework was tested through direct surveys conducted with all forest operation companies. Survey items included actual wages by occupation, identification and removal of outliers using quartile deviation, and occupation-based wage calculation. Results revealed that the appropriate wages for 2022 were as follows: KRW 163,376 for general workers, KRW 221,407 for special workers, KRW 250,045 for work leaders, and KRW 239,863 for wood cutters. These figures were 16.27% higher than those derived from the standard construction wage survey. The developed framework was validated by comparing the appropriate wages with both the standard construction wage survey and the forestry workers' wage. The results indicated that the wages calculated using the developed framework were 4.5% more similar to the forestry workers' wage compared with those from the standard construction wage survey. Consequently, the standard construction wage survey was deemed unsuitable for forest projects. To ensure efficient forest operations, it is imperative to conduct wage surveys using the developed framework over multiple years to accumulate sufficient data.

Deep Learning based Estimation of Depth to Bearing Layer from In-situ Data (딥러닝 기반 국내 지반의 지지층 깊이 예측)

  • Jang, Young-Eun;Jung, Jaeho;Han, Jin-Tae;Yu, Yonggyun
    • Journal of the Korean Geotechnical Society
    • /
    • v.38 no.3
    • /
    • pp.35-42
    • /
    • 2022
  • The N-value from the Standard Penetration Test (SPT), which is one of the representative in-situ test, is an important index that provides basic geological information and the depth of the bearing layer for the design of geotechnical structures. In the aspect of time and cost-effectiveness, there is a need to carry out a representative sampling test. However, the various variability and uncertainty are existing in the soil layer, so it is difficult to grasp the characteristics of the entire field from the limited test results. Thus the spatial interpolation techniques such as Kriging and IDW (inverse distance weighted) have been used for predicting unknown point from existing data. Recently, in order to increase the accuracy of interpolation results, studies that combine the geotechnics and deep learning method have been conducted. In this study, based on the SPT results of about 22,000 holes of ground survey, a comparative study was conducted to predict the depth of the bearing layer using deep learning methods and IDW. The average error among the prediction results of the bearing layer of each analysis model was 3.01 m for IDW, 3.22 m and 2.46 m for fully connected network and PointNet, respectively. The standard deviation was 3.99 for IDW, 3.95 and 3.54 for fully connected network and PointNet. As a result, the point net deep learing algorithm showed improved results compared to IDW and other deep learning method.

A Study on Dynamic Capacity Assessment of PSC Box Girder High Speed Railway Bridges Using Time Series Load (시계열하중을 이용한 PSC 박스 거더 고속철도교량의 동적성능 평가에 관한 연구)

  • Han, Sung Ho;Bang, Myung Seok;Lee, Woo Sang
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.30 no.3A
    • /
    • pp.211-219
    • /
    • 2010
  • The design concept of high speed railway bridges is applied to a method for increasing the stiffness of existing bridge structures considering the impact factor by a static load. Generally, the process of structural design would be relied upon an advanced foreign technology. However, the dynamic amplification factor (DAF) and dynamic capacity assessment of high speed railway bridges may be conducted essentially a detailed estimation because the resonance phenomenon is affected by the long length (380 m) and high speed (300 km/h) moving of a high speed railway (Korea Train eXpress: KTX). Therefore, this study will be examined the dynamic capacity of the typical PSC Box Girder high speed railway bridge efficiently, and offered the basic information for the reasonable structural design. For this, the static analysis is conducted considering the load line diagram of KTX based upon existing references. In addition, the KTX moving load is transformed into the time series load considering various analytical variables. The time history analysis is assessed reasonable using the transformed time series load. At that time, analytical variables for calculating the time series load are considered loading node distance, time increment and KTX velocity variation etc. The dynamic capacity of the PSC Box Girder high speed railway bridge is examined based upon the FE analysis result systematically. The structural safety is assessed quantitatively in accordance with the related regulation of the inside and outside of the country.

The monitoring of some heavy metals in oriental mineral medicines (광물성 생약 중 중금속의 모니터링)

  • Han, Eunjung;Chung, Jaeyeon;Park, Kyungsu;Kang, Inho;Kang, Sinjung;Kim, Yunje
    • Analytical Science and Technology
    • /
    • v.21 no.6
    • /
    • pp.480-486
    • /
    • 2008
  • This paper reports on the monitoring results of some heavy metals (Pb, Cd, As and Hg) in oriental mineral medicines. Levels of Pb, Cd and As were determined using the acid digestion method and ICP-MS. Hg levels were determined using the gold amalgamation method and Automatic mercury analyzer (AMA). The results indicated that, in the case of Pb, 25.81% (24 cases) of the samples were over MRL (5 mg/kg). Pb levels in Calamina, Pumex, and Cinnabaris exceeded MRL (5 mg/kg). In the case of Cd, 9.68% (17cases) of the samples were over MRL (0.3 mg/kg). Cd levels in Calamina, Pumex and Cinnabaris were exceeded MRL (0.3 mg/kg). In case of As, 24.73% (23 cases) of samples exceeded MRL (3 mg/kg). As levels in Calamina, Lithargyrum, Vermilionum, Cinnabaris and Chalcocitum exceeded MRL (3 mg/kg). In the case of Hg, it was shown that the 76.34% (78 cases) of the samples exceeded MRL (0.2 mg/kg). Hg levels in almost all the samples exceeded MRL (0.2 mg/kg). These results led us to recommend that the domestic commercial law to be legislated to ensure the quality estimation and safety of oriental mineral medicines.