• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.47
• /
• pp.33-54
• /
• 2002

Rice quality is much dependent on the pre-and post harvest management. There are many parameters which influence rice or cooked rice qualitys such as cultivars, climate, soil, harvest time, drying, milling, storage, safety, nutritive value, taste, marketing, eating, cooking conditions, and each nations' food culture. Thus, vice evaluation might not be carried out by only some parameters. Physicochemical evaluation of rice deals with amy-lose content, gelatinizing property, and its relation with taste. The amylose content of good vice in Korea is defined at 17 to 20%. Other parameters considered are as follows; ratio of protein body-1 per total protein amount in relation to taste, and oleic/linoleic acid ratio in relation to storage safety. The rice higher Mg/K ratio is considered as high quality. The optimum value is over 1.5 to 1.6. It was reported that the contents of oligosaccharide, glutamic acid or its derivatives and its proportionalities have high corelation with the taste of rice. Major aromatic compounds in rice have been known as hexanal, acetone, pentanal, butanal, octanal, and heptanal. Recently, it was found that muco-polysaccharides are solubilized during cooking. Cooked rice surface is coated by the muco-polysaccharide. The muco-polysaccharide aye contributing to the consistency and collecting free amino acids and vitamins. Thus, these parameters might be regarded as important items for quality and taste evaluation of rice. Ingredients of rice related with the taste are not confined to the total rice grain. In the internal kernel, starch is main component but nitrogen and mineral compounds are localized at the external kernel. The ingredients related with taste are contained in 91 to 86% part of the outside kernel. For safety that is considered an important evaluation item of rice quality, each residual tolerance limit for agricultural chemicals must be adopted in our country. During drying, rice quality can decline by the reasons of high drying temperature, overdrying, and rapid drying. These result in cracked grain or decolored kernel. Intrinsic enzymes react partially during the rice storage. Because of these enzymes, starch, lipid, or protein can be slowly degraded, resulting in the decline of appearance quality, occurrence of aging aroma, and increased hardness of cooked rice. Milling conditions concerned with quality are paddy quality, milling method, and milling machines. To produce high quality rice, head rice must contain over three fourths of the normal rice kernels, and broken, damaged, colored, and immature kernels must be eliminated. In addition to milling equipment, color sorter and length grader must be installed for the production of such rice. Head rice was examined using the 45 brand rices circulating in Korea, Japan, America, Australia, and China. It was found that the head rice rate of brand rice in our country was approximately 57.4% and 80-86% in foreign countries. In order to develop a rice quality evaluation system, evaluation of technics must be further developed : more detailed measure of qualities, search for taste-related components, creation and grade classification of quality evaluation factors at each management stage of treatment after harvest, evaluation of rice as food material as well as for rice cooking, and method development for simple evaluation and establishment of equation for palatability. On policy concerns, the following must be conducted : development of price discrimination in conformity to rice cultivar and grade under the basis of quality evaluation method, fixation of head rice branding, and introduction of low temperature circulation.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.5
• /
• pp.479-487
• /
• 2023

Recently, the destructive power of typhoons is continuously increasing owing to global warming. In a situation where the installation of floating wind turbines is increasing worldwide, concerns about the huge loss and collapse of floating offshore wind turbines owing to strong typhoons are deepening. A new type of disconnectable mooring system must be developed for the safe operation of floating offshore wind turbines. A new submersible mooring pulley considered in this study is devised to more easily attach or detach the floating of shore wind turbine with mooring lines compared with other disconnectable mooring apparatuses. To investigate the structural safety of the initial design of submersible mooring pulley that can be applied to an 8MW-class floating type offshore wind turbine, scale-down structural models were developed using a 3-D printer and structural tests were performed on the models. For the structural tests of the scale-down models, tensile specimens of acrylonitrile butadiene styrene material that was used in the 3-D printing were prepared, and the material properties were evaluated by conducting the tensile tests. The finite element analysis (FEA) of submersible mooring pulley was performed by applying the material properties obtained from the tensile tests and the same load and boundary conditions as in the scale-down model structural tests. Through the FEA, the structural weak parts on the submersible mooring pulley were reviewed. The structural model tests were conducted considering the main load conditions of submersible mooring pulley, and the FEA and test results were compared for the locations that exceeded the maximum tensile stress of the material. The results of the FEA and structural model tests indicated that the connection structure of the body and the wheel was weak in operating conditions and that of the body and the chain stopper was weak in mooring conditions. The results of this study enabled to experimentally verify the structural safety of the initial design of submersible mooring pulley. The study results can be usefully used to improve the structural strength of submersible mooring pulley in a detailed design stage.

• Asia pacific journal of information systems
• /
• v.18 no.1
• /
• pp.145-162
• /
• 2008

One of the big concerns in e-society is privacy issue. In special, in developing robust ubiquitous smart space and corresponding services, user profile and preference are collected by the service providers. Privacy issue would be more critical in context-aware services simply because most of the context data themselves are private information: user's current location, current schedule, friends nearby and even her/his health data. To realize the potential of ubiquitous smart space, the systems embedded in the space should corporate personal privacy preferences. When the users invoke a set of services, they are asked to allow the service providers or smart space to make use of personal information which is related to privacy concerns. For this reason, the users unhappily provide the personal information or even deny to get served. On the other side, service provider needs personal information as rich as possible with minimal personal information to discern royal and trustworthy customers and those who are not. It would be desirable to enlarge the allowable personal information complying with the service provider's request, whereas minimizing service provider's requiring personal information which is not allowed to be submitted and user's submitting information which is of no value to the service provider. In special, if any personal information required by the service provider is not allowed, service will not be provided to the user. P3P (Platform for Privacy Preferences) has been regarded as one of the promising alternatives to preserve the personal information in the course of electronic transactions. However, P3P mainly focuses on preserving the buyers' personal information. From time to time, the service provider's business data should be protected from the unintended usage from the buyers. Moreover, even though the user's privacy preference could depend on the context happened to the user, legacy P3P does not handle the contextual change of privacy preferences. Hence, the purpose of this paper is to propose a mutual P3P-based negotiation mechanism. To do so, service provider's privacy concern is considered as well as the users'. User's privacy policy on the service provider's information also should be informed to the service providers before the service begins. Second, privacy policy is contextually designed according to the user's current context because the nomadic user's privacy concern structure may be altered contextually. Hence, the methodology includes mutual privacy policy and personalization. Overall framework of the mechanism and new code of ethics is described in section 2. Pervasive platform for mutual P3P considers user type and context field, which involves current activity, location, social context, objects nearby and physical environments. Our mutual P3P includes the privacy preference not only for the buyers but also the sellers, that is, service providers. Negotiation methodology for mutual P3P is proposed in section 3. Based on the fact that privacy concern occurs when there are needs for information access and at the same time those for information hiding. Our mechanism was implemented based on an actual shopping mall to increase the feasibility of the idea proposed in this paper. A shopping service is assumed as a context-aware service, and data groups for the service are enumerated. The privacy policy for each data group is represented as APPEL format. To examine the performance of the example service, in section 4, simulation approach is adopted in this paper. For the simulation, five data elements are considered: $\cdot$ UserID $\cdot$ User preference $\cdot$ Phone number $\cdot$ Home address $\cdot$ Product information $\cdot$ Service profile. For the negotiation, reputation is selected as a strategic value. Then the following cases are compared: $\cdot$ Legacy P3P is considered $\cdot$ Mutual P3P is considered without strategic value $\cdot$ Mutual P3P is considered with strategic value. The simulation results show that mutual P3P outperforms legacy P3P. Moreover, we could conclude that when mutual P3P is considered with strategic value, performance was better than that of mutual P3P is considered without strategic value in terms of service safety.

• Journal of Ginseng Culture
• /
• v.1
• /
• pp.93-109
• /
• 2019

This study aims to look at the process of ginseng being removed from the Western pharmacopoeia in the 19th century, experiencing a crisis as an export product in the America in the 20th century, and eventually settling in the U.S. society and the military as a dietary supplement in the 21th century. In this process, the legislation of provided a bridgehead for ginseng and other botanical dietary supplements to enter the U.S. market. As a result, ginseng could be re-listed in the U.S. pharmacopoeia as a dietary supplement. However, this did not mean a complete soft landing of ginseng and other botanical dietary supplements in the America. The U.S. medical community, which has been afraid of the indiscriminate spread of botanical dietary supplements, has constantly raised "the risk-discourse" and expressed concerns over the use and abuse of botanical dietary supplements that have not been scientifically verified. This involved not only the fundamental problems caused by the lax verification process of , but also a new atmosphere in the U.S. where the public sought information about botanical dietary supplements rather than seeking professional clinicians related to their health. Against this situation, "the advocate-discourse" suggested by dietary supplement manufacturers and the people in charge of botanical products seemed rather relaxed. As consumers are taking this side, the advocates had only to stress that botanical dietary supplements have been used worldwide for a long time without any problems and were made from 'natural' materials. The fact that ginseng and other botanical dietary supplements were able to advance to the U.S. Military's dietary supplement manual, which is strict in controlling food, seems to have jumped on the bandwagon of this atmosphere in the U.S. Society. In the early U.S. dietary supplement manual reviewed in this paper, ginseng was the most detailed among many botanical dietary supplements. Although there are some 'safety concerns' that still exist in the civilian society, but there are also certainly good scientific explanations for the efficacy and references to the popularity and influence of ginseng in the American society. Given this, the U.S. society and military's interest in ginseng as a dietary supplement seem quite high.

• Journal of Distribution Science
• /
• v.9 no.4
• /
• pp.43-50
• /
• 2011

Concerning the risk factors of the outbreak of a fire in a traditional market, most of those markets are located in downtown areas or residential areas; thus, although their location may be favorable in terms of marketability, they face a potential risk in that a fire may develop into a large blaze owing to poor environment or the absence of facilities prepared for disaster during a fire. Moreover, as many people are densely poised in the markets, it is very probable that a fire may occur owing to the excessive use of heaters in the winter as well as the reckless use of electric and gas facilities. It seems that traditional markets encounter difficulty being insured against fire, because of their vulnerability and that the vast majority of small-scale sellers are likely to suffer mental anguish and tremendous physical injury in case of a fire. However, most of those sellers in the traditional markets are hand-to-mouth sellers, and they lack awareness of safety concerns and have insufficient experience in safe facility management. As small-scale sellers constitute the majority in the traditional market, the subscription rate of fire insurance in most of the traditional markets is low for the reasons of their needy circumstances and their financial burden. Statistically, the subscription by street vendors is non-existent; therefore, these vendors have a fairly limited access to indemnification after fire damage. Because of these problems, this study's purpose is to identify the current level of insurance subscription by these markets, which are exposed to poor facilities and vulnerability to fire. In order to fix this, it appears that shop owners and consumers will have to band together. For this study, we executed a fire policyholder fact-finding mission at traditional markets with approximately 108 and 981 stores. The research method was executed by an investigation using one-on-one individual interviews using a questionnaire. The contents investigated current insurance subscriptions. The method of analysis looked at the difference of insured amount according to volume size through cross-tabulation of the difference of insured amount by possession form, difference of insured amount by market form, difference of insured amount by category of business, difference of insured amount by market size, etc. Furthermore, the study should be used to propose solutions for problems through theoretical review with the use of a literature research, because the field case study was through interviews with the persons concerned, and the survey of the current insurance subscriptions by traditional market shopkeepers. The traditional market would generally have difficulty affording fire insurance. Fire insurance subscription rates of most of the market proved to be inactive, because of the economic burden of payment. Lack of funds is thought to be the main factor that causes a lack of realization about the necessity of fire insurance. In addition to expensive insurance premiums, sometimes, the companies' valuation of the businesses is lower than their actual valuations, and they do not pay out enough during a claim. The research presents an improvement plan that, when presented at the traditional markets, may strengthen their ability to procure fire insurance through the help of the central government. Researchers connected with the traditional market mainly accomplish the initial research. However, although this research has its limitations, it offers considerable benefits. For future researchers, I would suggest looking at several regions for comparison.

• Food Science and Preservation
• /
• v.20 no.3
• /
• pp.323-329
• /
• 2013

Strawberries are among the leading ready-to-eat agricultural products that have superior taste and nutrition. Thus, consumer concerns about the safety of eating strawberries are growing. To evaluate the contamination levels of strawberries according to their cultivation methods (nutriculture, pesticide-free culture and organic farming) and parts [fruit (flesh), stalk (pedunle) and leaf (calyx)], 1,020 parts of strawberry samples were collected at 12 farms in Nonsan-si and quantitatively or qualitatively examined for the indicators of food safety and food poisoning bacteria. The total aerobic bacteria count in the whole samples was 2.3~6.8 ${\log}_{10}$ CFU/g, and coliform bacteria were detected in 14.2% of the whole samples with a contamination level range of 2.1~4.5 log CFU/g. E. coli were detected in 0.9% of the whole samples with a contamination level range of 2.1~2.8 log CFU/g. The analysis of the bacterial levels according to the cultivation methods showed that the total aerobic bacteria and coliform counts were higher in the strawberries that were grown via organic farming than in those that were grown via nutriculture and pesticide-free culture. However, the E. coli counts of the strawberries that were grown via organic farming and via pesticide-free culture were similar and differed from that of the strawberries that were grown via nutriculture. The analysis of the contamination levels according to the parts of the strawberries showed that the total aerobic bacteria, coliform and E. coli counts of the fruits, stalks and leaves of the strawberries did not significantly differ. Staphylococcus aureus was detected in two organically grown strawberries, but Salmonella spp., Listeria monocytogenes and E. coli O157:H7 were not detected in the whole samples. These results show that the bacterial contamination levels of the strawberries differed based on their cultivation methods. Thus, a suitable method of reducing the bacterial contamination levels of strawberries according to their farming methods is needed.

• Journal of Korean Home Economics Education Association
• /
• v.21 no.4
• /
• pp.1-17
• /
• 2009

The purpose of this study was to investigate recognition of food additives, to provide the basic data for food education of high school students. The survey was conducted from 560 students who are boys and girls of high schools in Gwangju. Data were analyzed by a SAS program. According to the survey, an usual recognition for additive food according to related variable showed that it was the highest ratio of 4.18 that policy on complete labeling of foods should be requested for additive food but it showed the lowest 2.17 that additive food is promoting quality of food. In a difference of a degree of a correct answer of knowledge for additive food and knowledge according to related variable, a degree of a correct answer of knowledge for additive food showed a lot of interest in safety in that knowledge for safety showed 79.45 but were showed much lower 7.5% for a degree of a correct answer of actual knowledge of additive food among food ingredients labels. A a degree of a demand of information, safety concerns and understanding a uses of additive food according to sex and a grade showed that in a degree of a demand of information, the students have ever heard information of additive food was the girls were more than the boys and also freshmen were the most answered and have ever heard term of additive food was the boys were more than the girls and the sophomore students were the most answered questionnaire for media of TV. Radio. Newspaper and so forth. A degree of necessity the students know additive food was the most answered of positive from the boys and freshmen. Where the students would like to learn additive food was answered of media from the boys school teacher from the girls school teacher from the freshmen, media from the sophomore and the junior.

• Journal of Life Science
• /
• v.31 no.11
• /
• pp.1028-1036
• /
• 2021

Firefly luciferase (FLuc) can function as an efficient marker in the gene and viral therapies. Nonetheless, its clinical translation has been unaccomplished with the concerns on its exogenous nature and the similarity with human fatty acyl-CoA synthetase. In this study, we aimed to show safety of FLuc by conducting a set of preclinical experiments and a human use. Initially, FLuc permeability across the plasma membrane was investigated by delivering the FLuc-carrying viral vector, OTS-412, or the FLuc recombinant protein. After in vitro infection of OTS-412 into different cancer cell lines, FLuc activity was detected only in the cell lysates, but not in culture media. In addition, recombinant FLuc protein further showed the impermeability against the plasma membrane. Similar result was also observed in the in vivo experiment. After being injected into the VX2 tumor-bearing rabbit, the FLuc exclusively resided within the tumor tissue without being detected in the blood plasma or other organs. Human cancer cell lines originated from various organs were lysed and treated to the FLuc, and none of the human substrates was reactive against the FLuc. As a final step, FLuc recombinant protein was intravenously injected into a human. The luciferase was degraded with the half-life of 20 to 30 minutes in blood, and was untraceable from 1.5 hr after the injection. In addition, the blood plasma was nonresponsive against the fatty acids. Hematological analysis was also comparable between the pre- and post-injection. Altogether, our study collectively demonstrates the safety of the firefly luciferase.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.6
• /
• pp.152-161
• /
• 2023

In general, large-capacity hydrogen storage vessels, typically in the form of vertical cylindrical vessels, are constructed using steel materials. These vessels are anchored to foundation slabs that are specially designed to suit the environmental conditions. This anchoring method involves pre-installed anchors on top of the concrete foundation slab. However, it's important to note that such a design can result in concentrated stresses at the anchoring points when external forces, such as seismic events, are at play. This may lead to potential structural damage due to anchor and concrete damage. For this reason, in this study, it selected an vertical hydrogen storage vessel based on site observations and created a 3D finite element model. Artificial seismic motions made following the procedures specified in ICC-ES AC 156, as well as domestic recorded earthquakes with a magnitude greater than 5.0, were applied to analyze the structural behavior and performance of the target structures. Conducting experiments on a structure built to actual scale would be ideal, but due to practical constraints, it proved challenging to execute. Therefore, it opted for an analytical approach to assess the safety of the target structure. Regarding the structural response characteristics, the acceleration induced by seismic motion was observed to amplify by approximately ten times compared to the input seismic motions. Additionally, there was a tendency for a decrease in amplification as the response acceleration was transmitted to the point where the centre of gravity is located. For the vulnerable components, specifically the sub-system (support columns and anchorages), the stress levels were found to satisfy the allowable stress criteria. However, the concrete's tensile strength exhibited only about a 5% margin of safety compared to the allowable stress. This indicates the need for mitigation strategies in addressing these concerns. Based on the research findings presented in this paper, it is anticipated that predictable load information for the design of storage vessels required for future shaking table tests will be provided.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.4
• /
• pp.2476-2483
• /
• 2014

This study aims to review the characteristics of specialized classrooms for governmental secondary schools in the Japanese Colonial Era by analyzing architectural drawings collected by National Archives of Korea. The results of this study are summarized as follows 1) Under the influence of Japanese science promotion of that time, specialized classrooms for science were considered as one of essential facilities. Typically exclusive specialized classrooms were assigned to two major science subjects : physics-chemistry and biology. 2) To science specialized classrooms, ancillary rooms for preparation, experiment equipment and specimen were attached and science lecture room with stepped floor was planned additionally only for the lecture on theories and the demonstration of experiment. 3) Specialized classrooms for science were zoned independently of other facilities because of the special equipments and safety. 4) Art rooms were common to both boys' and girls' schools but concerning music rooms, girls' schools had special concerns, whereas boys' schools did not. 5) Specialized classrooms for homemaking subject of girls' school were as much important as those for science subjects of boys' school. 6) Some early-established Korean boys' schools had handicraft rooms which were the symbol of vocational education-oriented, unequal policy on Koreans. Though not general cases, specialized classrooms for geography-history were planned for Japanese boys' school. Restricted to governmental secondary schools but considering the uncommon state of specialized classrooms of that time, these characteristics show conditions of early time when special classrooms were introduced into Korea.