• Journal of Electrical Engineering and Technology
• /
• 제12권5호
• /
• pp.2079-2087
• /
• 2017

As the number of tall buildings is increasing, the high-speed lift is necessary in the modern world. Therefore, the further considerations for associated safety devices of lifts were required by the International Standards. In order to stop the moving of cage and keep it, the lifts have to be provided with means that can detect the unintended car movement. Therefore, the International Standard Safety Rules for the construction and installation of lifts had been revised. This paper describes the operation principles of the Rope Brake to fit the Unintended Car Movement Protection (UCMP) means required by the International Standards. This paper confirmed that the performance of these devices was suitable in the scope of the safety standards. This paper also analyzed that the shocks on working of these devices in a car would be dangerous to each passenger differently. Thus, this paper proposes a new design that the circuit diagram of the Unintended Car Movement Protection systems should be improved from the existing design to solve these internal shock problems. So, it is expected to protect passengers from the internal shocks by working of Rope Brake due to irrelevant factors.

• 한국안전학회지
• /
• 제31권3호
• /
• pp.47-52
• /
• 2016

This paper describes the design and fabrication of high frequency ground impedance measuring system for assessment of grounding system for Lightning protection. The ground impedance measuring system has been designed and fabricated which makes it possible to assess the ground impedance by frequency ranges from 100 Hz to 1 MHz. The effective grounding systems having a very low impedance to electromagnetic disturbance such as lightning surges and noises in microelectronics and high-technology branches are strongly required. In order to analyze the dynamic characteristic of grounding system impedances in lightning and surge protection grounding systems, it is highly desirable to assess the ground impedances as a measure of performance of grounding system in which lightning and switching surge currents with fast rise time and high frequency flow. The measuring system is based on the variable frequency power supply and consists of signal circuit part, main control part, data acquisition and processing unit, and voltage and current probe system. The ground impedance measuring system can be used to assess grounding system during occurrence of lightning.

• 한국군사과학기술학회지
• /
• 제21권5호
• /
• pp.665-674
• /
• 2018

In this paper, we propose a development results of a D-type non-rechargeable lithium battery($Li/SOCl_2$) on improvement in a low cost protection circuit of discharge for domestic military power source. According to this study, we describe a new design and product with 8-bit microcontroller in the protection circuit which can estimate state of health of the battery regardless of occurring an initial voltage delay. Also this paper discuss and facilitate development as solution to a safety about the non-rechargeable lithium batteries. As a result, we verified a quality of the protection circuit by a development test and evaluation(DT&E) process.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제50권4호
• /
• pp.179-187
• /
• 2001

In recent years, the switching source devices have the advantage of small, light and high reliability with the high-frequency. But, high-frequency switching has disclosed disadvantage of result from stress and turn-on and turn-off peak losses at the switching instant. Accordingly, in this paper propose ZVS-HB type high-frequency resonant DC/DC converter using soft switching technique (Zero-Voltage-Switching, Zero-Current-Switching) with safety operating of circuit at diving on inductive zone, through the circuit design example using the capacitor $C_3,\;C_4$ with soft switching function and division characteristic of resonant Capacitor C, $C_1,\;C_2$, and, the characteristic analysis of circuit is generally described using normalized parameters. Also, this paper certified a rightfulness of characteristic analysis in comparison with a theoretical values and a experimental values obtain from experiment using MOSFET.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1556-1558
• /
• 2005

As a result of the advancement of radio communications technologies, some investigations are in progress to apply this technologies to a train control system. Most of these investigations are focused on the train safety distance control between a preceding train and a succeeding train, an interlocking system uses train circuits to control the railway path. To make the best use of advantages and improve the safety of radio communications based train control systems, the interlocking system must use radio communications technologies. And the safety level of this system must be equal to track circuit based interlocking systems. This paper describes the train location detection method, the system configuration and the system safety of the new system.

• International Journal of Safety
• /
• 제7권2호
• /
• pp.7-11
• /
• 2008

In this paper, a Magnetic Core Reactor (MCR) which forms a part of the DC reactor type three-phase high-Tc superconducting fault current limiter (SFCL) has been developed. This SFCL is more economical than other types with three coils since it uses only one high-Tc superconducting (HTS) coil. When DC reactor type three-phase high-Tc SFCL is developed using just one coil, fewer power electronic devices and shorter HTS wire are needed. The SFCL proposed in this paper needs a power-linking device to connect the SFCL to the power system. The design concept for this device was sprang from the fact that the magnetic energy could be changed into the electrical energy and vice versa. Ferromagnetic material is used as a path of magnetic flux. When high-Tc superconducting DC reactor is separated from the power system by using SCRs, this device also limits fault current until the circuit breaker is opened. The device mentioned above was named Magnetic Core Reactor (MCR). MCR was designed to minimize the voltage drop and total losses. Majority of the design parameters was tuned through experiments with the design prototype. In the experiment, the current density of winding conductor was found to be $1.3\;A/mm^2$, voltage drop across MCR was 20 V and total losses on normal state was 1.3 kW.

• 한국산업정보학회논문지
• /
• 제18권5호
• /
• pp.81-92
• /
• 2013

인공위성은 태양전지판 전개, 통신 안테나 전개, 관측 장비에 대한 오염방지 덮개, 추진계의 파이로테크닉 밸브 및 리튬-이온 셀 모듈 바이패스 장치 등 다수의 분리장치들을 포함하고 있다. 파이로테크닉 회로로 동작되는 분리장치의 기폭제들은 단발성으로 동작되기 때문에 기폭제 구동은 성공적 임무 수행을 위해 필수 요소이다. 파이로테크닉 회로는 안전을 위한 스위칭 네트워크를 포함해야 한다. 일반적인 스위칭 네트워크는 기폭제 점화 동안 스위칭 과도상태 전류를 취급하기 위해 높은 정격 전류 용량의 점화 스위치로 구성되는 단점이 존재한다. 파이로테크닉 회로는 기폭제가 메인버스에서 점화되면 버스에서 요구되는 첨두 전력을 감소시킬 수 있는 전력 조절 기능을 필요로 한다. 본 논문은 기폭제 점화 동안 스위칭 과도상태 전류를 취급하기 위해 높은 정격 전류 용량의 점화 스위치로 구성되는 단점을 극복하기 위해 점화 스위치를 작동시키기 위한 점화 명령에 동조된 파이로테크닉 회로를 설계한다. 파이로테크닉 회로는 점화스위치들이 점화 전류를 전달만 하고 스위칭을 하지 않는 것을 보증하기 위해 점화 명령에 동조되어 전류 제한된 윈도우 펄스 점화 전류를 제공한다. 전류 제한된 윈도우 펄스 점화 전류는 스위칭 네트워크에서 낮은 정격 전류 용량과 가벼운 무게의 스위치 사용을 가능하게 한다. 파이로테크닉 회로의 전류 제한 기능은 기폭제에 공급하는 전압을 감소시키고 첨두 버스 전력을 감소시키는 전력 조절 효과를 제공한다. 정지궤도위성 개발에 적용하기 위해 파이로테크닉 회로는 개발 모델에서 시험하여 기능을 검증하였다.

• 한국항행학회논문지
• /
• 제26권2호
• /
• pp.47-53
• /
• 2022

최근 국방 기술이 발달함에 따라 다양한 항공기 무장/장착물이 국내에서 개발되고 있다. 그 중에서 항공기 발사용 순항 유도무기(유도탄)는 다양한 시험을 통해서 신뢰성 및 안전성을 확보한 후 항공기에 장착할 수 있다. 항공기로부터 분리된 유도탄은 항공기와 충돌을 회피하기 위해서 지정된 시간에 날개의 구속을 해제하고, 지정된 방향으로 날개를 제어해야한다. 이를 확인하기 위해서 안전 분리 절차에 따라 MIL-STD-1760 신호를 제어하고, 구속해제 성능을 검증할 수 있는 점검 시스템이 필요하다. 특히, 점검 시스템은 구속해제를 위한 파이로 회로를 점검하는 기능과 MIL-STD-1760 신호를 제어해서 구동 성능을 점검하는 기능이 필요하다. 또한, 항공기로부터 분리된 환경을 유도탄에 모의할 수 있어야한다. 본 논문은 지상에서 유도탄에 장착된 파이로 회로 및 구동 성능을 안전 분리 절차에 따라 검증할 수 있는 점검 시스템을 제시하였고, 비행시험을 통해서 항공기로부터 정상적으로 분리되는 것을 확인할 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 C
• /
• pp.1394-1397
• /
• 1995

In the hazardous areas where explosive gases, vapor or mists exist, electrical apparatus and installations must be of explosion-proof construction to prevent or limit the danger of the ignition of potentially explosive atmosphere. In Korea, nine types of protection have been specified in the government regulations at present: flameproof enclosure, pressurization, oil immersion, increased safety, intrinsic safety, non-incendive, sand filling, encapsulation, and special types. Among these types, the intrinsic safety has the construction which limit or by-pass igniting the electric energy using electronic devices. This type has lots of merits but at the same time requires a high-degree of technology. In this paper, we investigated several dominating factors which affect the minimum ignition energy: this energy plays a very important role in design and evaluation of the intrinsic safety type electrical apparatus. Eletrode material, which is one of the most important factors, was intensively studied for the five sorts of material(Al, Cd, Mg, Sn, and Zn) with performing experiment in a low-voltage inductive circuit using IEC-type spark apparatus. The experimental results show that the minimum ignition energy of electrode material is varied: highest in Cd and lowest in Sn. We also confirmed the effect of eletrode make-and-break speed and magnetic field magnitude.

• 해양환경안전학회지
• /
• 제11권1호
• /
• pp.29-37
• /
• 2005

본 논문에서는 고투자율 등방성 자기물질을 이용한 공진형 마그네토미터(Resonant-type Magnetometer, RM)의 설계와 개발에 관하여 기술하였다. 먼저, 자기 물질에 감은 코일의 인덕턴스 L과 등방성 고투자율 자기 물질에서 나타나는 투자율 u(H) 사이의 기본이론을 정립하였다. 다음으로, L 의 변화를 간단한 슈미트 트리거 회로를 이용하여 주파수로 획득할 수 있는 RM회로를 구현하였다. RM의 측정능력을 평가하기 위한 선회실험을 통하여 RM의 지구자장 성분 측정 가능성을 확인하였다.