• 해양환경안전학회지
• /
• 제24권3호
• /
• pp.319-324
• /
• 2018

The collision problem is one of the design factors that must be carefully considered for the risk of collision occurring during the operation of ships and offshore structures. This paper presents the main results of the ship collision study, and its main goal is to analyze potential crash scenarios that may occur in the FLNG (Floating Liquefied Natural Gas) considering the likelihood and outcome. Consideration being given to vessels visiting the FLNG and surrounding vessels navigating around, such as functionally supported vessels and offloading carriers. The scope includes vessels visiting the FLNG facility such as in-field support vessels and off-loading carriers, as well as third party passing vessels. In this study, based on QRA (quantitative risk assessment), basic research methods and information on collision are provided. Based on the assumptions and methodologies documented in this study, it has been possible to clarify the frequency of collision and the damage category according to the type of visiting ship. Based on these results, the risk assessment results related to the collision have been derived.

• 한국도로학회논문집
• /
• 제17권4호
• /
• pp.107-115
• /
• 2015

PURPOSES: This study analyzes the characteristics of traffic flow on freeway sections under daytime and nighttime conditions to improve traffic safety, and suggests a method to estimate an accurate freeway capacity value that reflects these characteristics. METHODS : The trends and differences in capacity were investigated using comprehensive field data collected under both daytime and nighttime conditions on freeway sections with designated speeds of 80, 100, and 120 kph. RESULTS : The capacity values under nighttime driving conditions were reduced by 3.3%, 6.9%, and 8.8% at 80, 100, and 120 kph, respectively. Several nighttime adjustment factors were deduced for each designated speed category from the analysis results. CONCLUSIONS : It is expected that more accurate capacity values can be estimated for freeway sections under nighttime conditions by applying the resulting adjustment factors. In addition, traffic safety will be improved through the increased efficiency of traffic management on these freeway sections.

• 한국안전학회지
• /
• 제17권3호
• /
• pp.66-72
• /
• 2002

During the last ten years, effort has been made for reducing maintenance cost for aged equipments and ensuring safety, efficiency and profitability of petrochemical and refinery plants. Hence, it was required to develop advanced methods which meet this need. RBI(Risk Based Inspection) methodology is one of the most promising technology satisfying the requirements in the field of integrity management. In this study, a qualitative assessment algorithm for RBI based on the API 581 code was reconstructed for developing an RBI software. The user-friendly realRBI software is developed with a module for evaluating qualitative risk category using the potential consequence factor and the likelihood factor.

• 한국항공운항학회지
• /
• 제15권1호
• /
• pp.18-25
• /
• 2007

The safety should be primarily considered for air vehicle, such as helicopter, which is not easy to cope with when out of order or loss of control that followed catastrophe. The U.S National Transportation Safety Board (NTSB) investigated and analyzed for 34 years rotorcraft accidents that occurred from 1963 through 1997. This paper handles intensively the relative investigation and analysis of recent 10 years domestic civil helicopter accidents to those of the United States in order to increase the safety of helicopter transportation and to consider the main design parameter before we develop Korean Civil Helicopter. To understand the overview of civil turbine helicopter accident, it uses the NTSB's accident investigation results and the overall accident trend for U.S civil single and twin turbine engine helicopter according to category, cause, activity, and phase of operation.

• Safety and Health at Work
• /
• 제7권1호
• /
• pp.55-62
• /
• 2016

Background: This study aims to: (1) examine rates of obesity and physical health complaints among 911 telecommunicators; and (2) document the role of emotion dysregulation, psychological inflexibility, duty-related distress and dissociation, and psychopathology in predicting obesity and physical health complaints in this population. Methods: The sample consisted of 911 telecommunicators from across the country (N = 758). Participants completed an online survey assessing their mental and physical health functioning. Results: A total of 82.5% of the sample reported a body mass index that fell within the overweight or obese category and an average of 17 physical health complaints within the past month. Peritraumatic reactions (distress and dissociation), emotion dysregulation, and psychological inflexibility had effects on physical health largely through psychopathology (alcohol abuse, post-traumatic stress disorder, and depression). Conclusion: Development of adapted prevention and intervention efforts with this population is needed.

• 한국항행학회논문지
• /
• 제18권4호
• /
• pp.319-324
• /
• 2014

LOSA(line operation safety audit)는 정상적인 운항 상태에서 운항 승무원이 발생할 수 있는 사고를 수집하기 위한 선제적 데이터 수집 방식으로 비행 중 발생하는 TEM(threat error management)과 CRM(crew resource management) 등을 수집하는 안전관리프로그램이다. 기존의 LOSA 기록 방식은 워크시트(worksheet) 에 관찰자가 직접 작성하여 자료를 보관하고 관리를 수행하였으나, 자료 보관의 어려움과 비밀 보장이 어려운 문제점이 있다. 기존의 LOSA 수집방식 대신 웹(web) 형태로 한국형 LOSA(K-LOSA)를 구현과 TEM 분류 코드를 변경하므로 효과적인 자료 관리 및 비밀 보장성을 확보하였다. 본 논문에서는 LOSA에 대하여 살펴보고 K-LOSA 프로그램의 구성을 소개한다.

• 한국항공운항학회지
• /
• 제21권1호
• /
• pp.80-86
• /
• 2013

In an effort to decrease aviation accident worldwide, development of aviation safety management has been sought through aviation index and standardization, both by establishing SMS(Safety Management System). It also needs to be done in the domestic. both study on SMS which ICAO recommends and setting the top priority safety goal, each differently classified by nations. Accordingly, defining safety index and developing continuous monitoring approach. Aircraft accident reporting system in Air Force does not operate in a open approach method due to its uniqueness related to mission achievement. Therefore, limits of utilizing the recent worldwide aircraft data sharing and analyzing results to prevent accident is inevitable. This paper introduces an overview of ECCAIRS 5 which become the standard for the recent worldwide aviation safety reporting and data exchange system. Also using ECCAIRS 5, aircraft accident cases of the Air Force are classified such as accident type, year, month, occurrence category, and flight phase. The result of the study will provide a guide line for utilizing the civil system in prevention of future military aviation accidents.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2013년 추계학술대회
• /
• pp.221-230
• /
• 2013

This paper is written following an analysis of occurrence trend of industrial disaster in manufacturing industry. One of major reason of industrial accident is unsafe action caused by lack of work supervision. so we have surveyed the understanding level of supervisors for industrial safety and their education of industrial safety which is forced by industrial law. We have got the result that the supervisor's education is necessary to prevent industrial disaster but it's not fit for their own workplace for various reasons from the survey and analysis. I would like to suggest effective solutions. The institute of education should train that they can execute safety and health works themselves by classification of the industrial category, company scale and located region. Also, government should endow supervisors with authority and responsibility for the activation of education system. Finally, government should support the expense of education to medium and small-sized enterprises especially, and they should be interested in the attendance and execution of education. They will achieve the goal to prevent industrial disasters in manufacturing industry through the enforcement of effective supervisor system as per the remark mentioned above.

• 대한안전경영과학회지
• /
• 제7권1호
• /
• pp.101-115
• /
• 2005

This study deals with the procedure of safety improvement, productivity increase ,and tact-time reduction through setting up the system about preventive maintenance. Actually, it is hard to establish and carry out preventive maintenance, even though we recognize the importance of the system concerning time, cost, labor, and so forth. In this study in the viewpoint of cost we are for achieving maximum efficiency by change and reduction of planning process adapted to the special work group. At first we briefly will mention the kind ,the necessity ,and the concept of preventive maintenance ,and then divide the equipment used in the assembly line into the two whether it is necessary or not by way of estimating the breakdown loss ,comparing with general establishment of preventive maintenance and modifying it to the case. At the second step we will establish the operation system of plan management related to production and quality in the special case. Check period and category will be set by dividing the assembly equipment into LCL and Focus in the third step. The forth step will contain the operation procedure in detail. And then we must make check and repair record periodically. Finally, on the basis of the record the selection of checking of significance will be conducted. This results in safety improvement, tact time reduction, and productivity improvement.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2004년도 추계학술대회
• /
• pp.131-141
• /
• 2004

This study deals with the procedure of safety improvement, productivity increase, and tact-time reduction through setting up the system about preventive maintenance. Actually, it is hard to establish and carry out preventive maintenance, even though we recognize the importance of the system concerning time, cost, labor, and so forth. In this study in the viewpoint of cost we are for achieving maximum efficiency by change and reduction of planning process adapted to the special work group. At first we briefly will mention the kind, the necessity, and the concept of preventive maintenance, and then divide the equipment used in the assembly line into the two whether it is necessary or not by way of estimating the breakdown loss, comparing with general establishment of preventive maintenance and modifying it to the case. At the second step we will establish the operation system of plan management related to production and quality in the special case. Check period and category will be set by dividing the assembly equipment into LCL and Focus in the third step. The forth step will contain the operation procedure in detail. And then we must make check and repair record periodically. Finally, on the basis of the record the selection of checking of significance will be conducted. This results in safety improvement, tact time reduction, and productivity improvement.