• 해양환경안전학회지
• /
• 제24권3호
• /
• pp.295-301
• /
• 2018

This study compares optimization algorithms for efficient estimations of ship's hydrodynamic coefficients. Two constrained algorithms, the interior point and the sequential quadratic programming, are compared for the estimation. Mathematical optimization is designed to get optimal hydrodynamic coefficients for modelling a ship, and benchmark data are collected from sea trials of a training ship. A calibration for environmental influence and a sensitivity analysis for efficiency are carried out prior to implementing the optimization. The optimization is composed of three steps considering correlation between coefficients and manoeuvre characteristics. Manoeuvre characteristics of simulation results for both sets of optimized coefficients are close to each other, and they are also fit to the benchmark data. However, this similarity interferes with the comparison, and it is supposed that optimization conditions, such as designed variables and constraints, are not sufficient to compare them strictly. An enhanced optimization with additional sea trial measurement data should be carried out in future studies.

• Structural Engineering and Mechanics
• /
• 제54권5호
• /
• pp.999-1016
• /
• 2015

In this paper, we introduce a new method for assembly of shipbuilding blocks at sea and present its feasibility focusing on structural safety. The core concept of this method is to assemble ship building blocks by use of bolting, gluing and welding techniques at sea without dock facilities. Due to its independence of dock facilities, shipyard construction capability could be increased considerably by the proposed method. To show the structural safety of this method, a bulk carrier and an oil tanker were employed, and we investigated the structural behavior of those ships to which the new block assembly method was applied. The ship hull models attached with connective parts are analyzed in detail through finite element analyses, and the cargo capacity of the bulk carrier is briefly discussed as well. The results of these studies show the potential for applying this new block assembly method to practical shipbuilding.

• 한국항해항만학회지
• /
• 제34권9호
• /
• pp.693-698
• /
• 2010

In port and its approach channel, traffic accidents such as collision, aground, minor collision have reached about 77% of total marine casualty in the area. In this paper, an attempt to enhance the safe navigation was proposed by offering marine traffic supporting system which helps VTS operator assist vessel effectively with the quantitative assessment on difficulty of each vessel. The system collects navigation data from onboard AIS, assesses the data in assessment mode to analyze the navigation difficulties of each vessel and displays the degree of danger of each vessel on the ECDIS in real-time to decide the intervention time or order of priority for VTS operator. The effectiveness of the system was verified by the VTS operators in Korea.

• 해양환경안전학회지
• /
• 제23권3호
• /
• pp.301-312
• /
• 2017

CE RCD (Recreational Craft Directive) is a certification for the design and construction of small vessels, including pleasure yachts, which are widely used not only in the countries within the European Union, but also in Japan and Southeast Asia. Recently, South Korean leisure craft shipyards have developed interest in exporting to foreign leisure craft markets such as Europe; however, they have encountered difficulties because of the CE RCD regulations, which are relatively complex and difficult to understand. The requirements for buoyancy and stability, which are essential properties that must be understood within the early stage of ship design, are defined based on ISO 12217. However, preparing this assessment according to ship classification regulations is an exceedingly complex task, even with knowledge of naval architecture. In this research, we have developed design support tools to systematically support assessments and preemptively define design information so that buoyancy and stability assessments based on ISO 12217 can be systematically prepared. Our research results were applied to actual examples of yacht design to confirm validity. We believe that the improved yacht design process presented in this research can act as a foundational reference for enhancing the effectiveness and systematic buoyancy and stability assessments.

• 해양환경안전학회지
• /
• 제6권1호
• /
• pp.1-9
• /
• 2000

The paper describes system design of next-generation Ship Simulator using Virtual Reality (VRSS), well known as human-computer interaction. VRSS system is required to have special condition that comprises multiple user participants such as captain, officer, pilot, and quartermaster. To cope with that condition, core technologies were explored and proposed multi-networking system with broker server. The evaluation of the proposed system was done with PC-based immersion-type VR device, constituted with HMD (Head Mounted Display), Head Tracking Sensor, Puck, Headphone, and Microphone. Using the VR device, assessment test was carried out in a virtual bridge with 3D objects, which are created by VRML (Virtual Reality Model Language) program. As results of tests, it is shown that the cybernetic 3D objects were act as if real things in a real ship's bridge. Therefore, interesting interaction with participants can be obtained in the system, Thus, we found that the proposed system architecture can be applicable to VRSS system construction.

• 한국해양공학회지
• /
• 제38권3호
• /
• pp.87-102
• /
• 2024

Given the inadequate regulatory framework for liquefied hydrogen gas storage tanks on ships and the limitations of the IGC Code, designed for liquefied natural gas, this study introduces a critical assessment procedure to ensure the safety and suitability of such tank designs. This study performed a heat transfer analysis for boil-off gas (BOG) calculations and established separate design load cases to evaluate the yielding and buckling strength. In addition, the study assessed methodologies for both high-cycle and low-cycle fatigue assessments, complemented by comprehensive structural integrity evaluations using finite element analysis. A comprehensive approach was developed to assess the structural integrity of Type C tanks by conducting crack propagation analysis and comparing these results with the IGC Code criteria. The practicality and efficacy of these methods were validated through their application on a 23K-class liquefied hydrogen carrier at the concept design stage. These findings may have important implications for enhancing safety standards and regulatory policies.

• 한국산학기술학회논문지
• /
• 제16권6호
• /
• pp.3680-3684
• /
• 2015

조선소에서 데크 크레인은 지상에 설치된 타워 크레인이나 해상 크레인을 사용하여 리프팅 설치 방법에 의해 선박에 탑재된다. 데크 크레인의 두 점 리프팅 설치 작업 시에는 임시 고정 지그 등을 사용하는데, 안전한 리프팅 작업을 위해서는 고정 지그의 형상 및 설치 위치를 고려한 리프팅 안전성 평가가 선행되어야 한다. 본 연구에서는 데크 크레인 및 고정 지그에 해당하는 유한요소해석 모델을 각각 생성하고, 리프팅 반력 및 경계 조건을 적용한 구조 해석을 수행하여 리프팅 설치 작업에 대한 안전성을 평가하였다. 본 연구에서 제시한 안전성 평가 방법은 다양한 데크 크레인의 리프팅 설치 작업 시에 보다 안전한 리프팅 작업 가이드를 제공할 수 있는 해석적 툴로 활용될 수 있다.

• 한국항해항만학회지
• /
• 제34권3호
• /
• pp.213-220
• /
• 2010

최근 IMO에서는 산적화물선 및 유조선, 대형여객선에 이어 '일반화물선의 안전(general cargo ships safety)'에 대한 논의의 필요성이 제기(IMO, 2006a)되고 있으며, 본격적인 논의를 위한 준비 작업으로 국제선급협회(IACS)를 통한 공식안전성평가(Formal Safety Assessment, 이하 FSA) 작업이 수행되고 있다. FSA란 위험도(risk)분석과 비용-효과 평가(cost-benefit assessment)를 바탕으로 인명, 해양환경 및 재산의 보호를 포함한 해사안전의 향상을 목적으로 한 구조화되고 체계적인 방법론으로서 새로운 법규의 평가, 기존법규와 새로운 (제안) 법규와의 비교, 그리고 여러 이해관계자의 공감대 형성을 통해 법규 변경/개발을 용이하게 하는 수단이다(IMO, 2007). 본 연구는 국적일반화물선의 안전성 평가를 위한 수단으로서 IMO FSA방법론의 유용성을 확인하고, 향후 IMO에서의 '일반화물선 안전'에 대한 논의에 대응하기 위한 기초자료의 확보를 목적으로 하고 있다. 본 논문에서는 국적일반화물선에 대한 FSA의 1, 2 단계에 해당하는 위험요소 식별(Hazard identification) 및 사고시나리오에 대한 위험도 분석(Risk analysis) 결과를 중심으로 소개하였다.

• 대한조선학회논문집
• /
• 제41권3호
• /
• pp.41-48
• /
• 2004

Ship is being operated under a highly dynamic environments and many factors are related with ship's collision and those factors are interacting. So, the analysis on ship's collision causes are very important to prepare countermeasures which will ensure the safe navigation. This study analysed the ship's collision data over the past 10 years(1991-2000), which is compiled by Korea Marine Accidents Inquiry Agency. The analysis confirmed that ‘ship's collision' is occurred most frequently and the cause is closely related with human factor. The main purpose of this study is to propose risk control measures of ship's collision. For this, the structure of human factor is analysed by the questionnaire methodology. Marine experts were surveyed based on major elements that were extracted from the human factor affecting to ship's collision. FSM has been widely adopted in modeling a dynamic system which is composed of human factors. Then, the structure analysis on the causes of ship's collision are performed using FSM. This structure model could be used in understanding and verifying the procedure of real ship's collision. Furthermore it could be used as the model to prevent ship's collision and reduce marine accidents.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2017년도 추계학술발표회
• /
• pp.84-84
• /
• 2017