• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.44-52
• /
• 2019

Industrial accidents differ considerably according to the industry and the scale of these industries. These industrial disasters have been analyzed in various ways. Therefore, a technique was developed to evaluate the disaster level among companies using the ANP method and the data derived from the disaster statistics over the past five years(2013~2017), as well as the safety information characteristics through questionnaires. The objective of the study was to determine the disaster level and safety level of a company. In this paper, six factors that are considered important for assessing the disaster level of the enterprise among the disaster statistics were selected. These factors included the industry type and size, age of employee, duration of treatment, duration of employment, and typical occurrence. Most companies use the accident rate for their disaster level to compare only with other companies. In this study, the weighting factors of the company were derived taking the characteristics of each company into consideration. Therefore, the disaster level of each company can be evaluated using the disaster statistics from each company and the derived weighting factors.

• Journal of Korean Academy of Nursing
• /
• v.30 no.5
• /
• pp.1279-1291
• /
• 2000

The main objectives of this study were to analyze the concept of hope, so to provide basic data to develop a valid instrument to measure hope, and to develop hope enhancing nursing intervention a program for cancer patients. The hybrid model approach was applied in three phases, the theoretical phase, the empirical phase, and the analytic phase. The study was developed on universal attributes explaining generalized hope and specific hope, which were revealed in a comprehensive review of the literature. In the empirical phase, eight cancer patients undergoing chemotherapy were interviewed to reveal causes, motivation, and their resource of hope according to The Hope Assessment Guide (Farren, Herth, & Popovich, 1995). In the analytical phase, the results of the two previous stages of the study were compared. The results were as follows : In the theoretical phase, six dimensions of hope emerged; affective, cognitive, behavioral, affiliative, temporal and contextual dimension. The antecedent of hope was loss, crisis, uncertainity, and stress. The consequences were renewal, development of new methods, safety, peace and transcendental competence. In the empirical phase, these six dimensions emerged as theoretical phases were verified and specified as these descriptive terms: feeling, intention, expectation, activity, relation, future- orientation, reality and goal-setting. The antecedent factor of hope was occurrence or recurrence of cancer. The consequence of hope was ability to cope with real condition, feeling of safety and comfort, peace, development of new strategy and recovery of disease. The major content of hope in this phase was related to specific hope, but it was also influenced on by general hope. In the analytic phase, general and specific hope was renamed as trait and state hope. All attributes emerged at the empirical phases, and also emerged at the theoretical phase. However, cognitive and contextual dimensions were revised and specified. In conclusion, the concept of hope is divided into trait hope and state hope, and state hope is an anticipatory expectation that occurs at the time of a stressful stimulus, such as being diagnosed with cancer. Hope is a multidimensional dynamic energized mental state which has the dimensions of affective, cognitive, behavioral, affiliative, temporal and contextual. There should be further studies to develope the state and trait hope scale according to definition and attributes of hope investigated in this study. In addition, considering results of the empirical phase, the family is very a important factor as a resource of hope, so it is necessary to consider family in implementing a nursing intervention program to enhance hope.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.7
• /
• pp.59-66
• /
• 2014

Nowadays, some studies are performed in order to introduce the Limit State Design method widely used in foreign work sites. LRFD (Load Resistance Factor Design) method is widely used in the fields in which the data accumulation is possible - such as deep foundations, and shallow foundations, etc. The limit state design in the retaining walls is insufficient in the country owing to difficulties applying load tests. The limit state design method for retaining wall structures are studied based upon the National Retaining wall Design Standard legislated in 2008 by Ministry of Land, Transport, and Maritime Affairs. In this paper several retaining walls were calculated according to LRFD design criteria analysis using the general program with limit state design method and the factor of safety for sliding and overturning. Comparing with their results, the Taylor's series simple reliability analysis was performed. In the analysis results of retaining wall section, safety factors calculated by LRFD were found to be lowered than those calculated in current WSD, and it is possibly judged to be economic design by changing wall dimensions. In the future, pre-assessment of the geotechnical data for ensuring the reliability and the studies including reinforced retaining walls with ground anchor are needed.

• Herbal Formula Science
• /
• v.29 no.3
• /
• pp.127-145
• /
• 2021

Objectives : The purpose of this study was to evaluate the effects of Daeganghwal-tang on knee cartilage in monosodium iodoacetate(MIA)-induced osteoarthritis rats. Methods : Forty SD rats were randomly divided into five groups(n=8/group): normal group was SD rats group injected with normal saline at left knee joint and administrated orally distilled water, control group was MIA-induced osteoarthritis SD rats group administrated orally distilled water, Indomethacin group was MIA-induced osteoarthritis SD rats group administrated orally indomethacin 2 mg/kg, DGHT(L) group was MIA-induced osteoarthritis SD rats group administrated orally 1280 mg/kg of Daeganghwal-tang, and DGHT(H) group was MIA-induced osteoarthritis SD rats group administrated orally 2560 mg/kg of Daeganghwal-tang. After orally administration of drugs for 4 weeks, gross appearance and histological analysis were used to evaluate the degree of knee cartilage damage. In addition, pro-inflammatory cytokines, bone degrade factor and bone defence factors were analyzed to investigate the anti-inflammatory and cartilage protection effects of Daeganghwal-tang. Also, hematological test, biochemical test, and liver and kidney tissue were analyzed to determine the safety of Daeganghwal-tang. Results : Daeganghwal-tang inhibited the damage of the knee cartilage, and significantly prevented the reduction in cartilage thickness. In addition, the pro-inflammatory cytokines and the bone degrade factor significantly decreased, and the bone defence factors significantly increased. In the safety assessment of Daeganghwal-tang, there were no significant differences among the experimental groups and no abnormal findings were observed. Conclusions : Daeganghwal-tang has anti-inflammatory effect, inhibits cartilage damage, and protects cartilage in MIA-induced osteoarthritis rats.

• Environmental Mutagens and Carcinogens
• /
• v.22 no.3
• /
• pp.187-198
• /
• 2002

Chlorpyrifos is an organophosphate insecticide and one of the most commonly and widely used insecticide. However, a little known about the dermal risk of chlorpyrifos on human being. Therefore, this study was conducted for the dermal risk assessment after exposure to chlorpyrifos in Korean farmers. First, skin irritation by chlorpyrifos (10 mg/$\textrm{cm}^2$, 50 mg/$\textrm{cm}^2$, 100 mg/$\textrm{cm}^2$, 250 mg/$\textrm{cm}^2$ in acetone) was determined in rabbits for 5 days considering the usage of chlorpyrifos short term highly exposure. The index of skin irritation by chlorpyrifos was increased in each dose and length of exposure dependent manners. Next, using benchmark dose (BMD$_{5}$) approach, the dose-response relationship was assessed to calculate the reference dose (RfD). The value of RfD was 2.84 $\mu\textrm{g}$/kg/day from 142.16 $\mu\textrm{g}$/kg/day BMD5 value divided uncertainty factor 50. Finally, we assessed human dermal risk of chlorpyrifos with exposure level and RfD. Skin absorbed levels were assumed with several exposure scenarios encounting the circumstances of exposure that application method, protection equipment and cloth, exposure time and exposure frequency during chlorpyrifos spraying. By the comparison of skin absorbed dose with the reference dose, it was identified that risk values (risk index) to skin chlorpyrifos exposure were 0.958 from the point of above results and it was recommended that the occurrence of hazard effect (skin irritation toxicity) of chlorpyrifos would not be expected. Risk index was smaller than 1 in the case of spraying vehicle mounted application, 1hour exposure time and wearing protective cloth exposure. Whereas, risk index was above 1 in the case of hand-held application, 2hour exposure time and wearing common cloth. Comparing two kinds of application method, total risk index of the hand held application (1.67) was higher than vehicle mounted (0.27). Therefore, chlorpyrifos skin exposure was mainly affected by application equipment and applied form. The results of risk assessment on the human dermal toxicity of chlorpyrifos should be required to control in keeping safety rules, skin surface area available for contact, spraying time ,and spraying frequency.y.

• Journal of Environmental Science International
• /
• v.25 no.4
• /
• pp.505-516
• /
• 2016

With the development of nanotechnology, nanomaterials are used in various fields. Therefore, the interest regarding the safety of nanomaterial use is increasing and much effort is diverted toward establishment of exposure assessment and management methods. Occupational exposure limits (OELs) are effectively used to protect the health of workers in various industrial workplaces. This study aimed to propose an OEL for domestic multi-walled carbon nanotubes (MWCNTs) based on animal inhalation toxicity test. Basic procedure for development of OELs was examined. For OEL estimation, epidemiological study and quantitative risk assessment are generally performed based on toxicity data. In addition, inhalation toxicity data-based no observed adverse effect level (NOAEL) and benchmark dose (BMD) are estimated to obtain the OEL. Three different estimation processes (NEDO in Japan, NIOSH in USA, and Baytubes in Germany) of OELs for carbon nanotubes (CNTs) were intensively reviewed. From the rat inhalation toxicity test for MWCNTs manufactured in Korea, a NOAEL of $0.98mg/m^3$ was derived. Using the simple equation for estimation of OEL suggested by NEDO, the OEL of $142{\mu}g/m^3$ was estimated for the MWCNT manufacturing workplace. Here, we used test rat and Korean human data and adopted 36 as an uncertainty factor. The OEL for MWCNT estimated in this work is higher than those ($2-80{\mu}g/m^3$) suggested by previous investigators. It may be greatly caused by different physicochemical properties of MWCNT and their dispersion method and test rat data. For setting of regulatory OELs in CNT workplaces, further epidemiological studies in addition to animal studies are needed. More advanced technical methods such as CNT dispersion in air and liquid should be also developed.

• Journal of Korean Society of Transportation
• /
• v.30 no.5
• /
• pp.91-100
• /
• 2012

Although Korea's coastal areas increasingly experience marine accident due to frequent ship encounters, increased vessel traffic and large vessel, there is a no specific model to evaluate the navigating vessel's risk for the given situation. The maritime transport environmental assessment is necessary due to the amended marine traffic law. However, marine safety diagnosis is now evaluated by foreign models. In this paper, therefore, we suggest a domestic model catering to and reflecting the characteristics of Korea's costal areas as well as those of vessel navigator's risk. We can evaluate subjective risks using this model, and can establish the model output as maritime risk exposure assessment system. We have performed analyses of variance and multiple comparison to identify the factor affecting subjective risks. As a result, measurable subjective risks of maritime traffic accident based on our suggested model can be expressed using the maritime risk exposure assessment system with geographic information system.

• Journal of Radiation Protection and Research
• /
• v.24 no.2
• /
• pp.101-108
• /
• 1999

The influence of the relative humidity, the temperature and the velocity of supply air on evaporation rate has been studied with non-boiling forced evaporation system in order to treat very low level radioactive liquid wastes produced from the decontamination and decommissioning activities. Experimental data on the evaporation rate have been obtained with the divers variables and experimental equation of air velocity was also obtained by the correlation of those data. The decontamination factor of this system was also obtained by the experimental data from a simulated liquid waste containing Cs-137 radio isotope ; $DF=10^4$. Since the commercial system will be operated for the treatment of the very low level radioactive liquid waste produced from decontamination & decommissioning of TRIGA Mark-II&III research reactor, the environmental assessment has been conducted to improve the operational safety. Exposure dose rate for an individual member of general public was assessed, and it showed that it was very lower than individual dose limits. The release of radioactivity of radioisotope material (Cs-137) to the environment was assessed, and result showed that it was $4.637{\times}10^{-14}\;{\mu}Ci/cc$.

• Journal of Korean Society of Steel Construction
• /
• v.20 no.6
• /
• pp.723-730
• /
• 2008

Due to the higher ratio of live load to total loads of railway bridges, the accumulated damage by cyclic fatigue is significant. Moreover, it is highly possible that the initiated crack grows faster than that of highway bridges. Therefore, it is strongly needed to assess the safety for the accumulated damage analytically. The initiation and growth of fatigue-crack are related with the stress range, number of cycles, and the stiffness of the structural system. The stiffness of the structural system includes uncertainties of the planning, design, construction and maintenance, which varies as time goes. In this study, the authors developed the design and risk assessment techniques based on the reliability theories considering the uncertainties in load and resistance. For the probabilistic risk assessment of crack growth and the remaining life of the structures by the cyclic load of railway and subway bridges, response surface method (RSM) combined with first order second moment method were used. For composing limit state function, the stress range, stress intensity factor and the remaining life were selected as input important random variables to the RSM program. The probabilities of failure and the reliability indices of fatigue life for the considered specimen under cyclic loads were evaluated and discussed.

• Korean Journal of Soil Science and Fertilizer
• /
• v.51 no.2
• /
• pp.128-141
• /
• 2018

Industrial complex releasing huge amounts of dusts, fumes and wastewater containing heavy metal(loid)s could be a source of heavy metal(loid)s pollution in arable soil. Heavy metal(loid)s pollution in arable soil adversely affect crops safety, subsequently human being. Hence, it is important to accurately assess the heavy metal(loid)s pollution in soil using pollution indices. The objectives of this study are 1) to compare assessment methods of heavy metal(loid)s pollution in arable soils located near industrial complex in Gyeongsang provinces and 2) to determine the relationship between concentration of plant available heavy metal(loid)s and chemical properties of soil. Soil samples were collected from 85 sites of arable lands nearby 10 industrial complex in Gyeongsang provinces. The average total concentration of all heavy metal(loid)s of the studied soils was higher than that of Korean arable soils but did not exceed the warning criteria established by the Soil Environmental Conservation Act of Korea. Only six sites of arable soils for the total concentration of As, Cu and Ni exceeded the warning criteria (As: $25mg\;kg^{-1}$, Cu: $150mg\;kg^{-1}$, Ni: $100mg\;kg^{-1}$). The contamination factor (CF) and geoaccumulation index ($I_{geo}$) of the heavy metal(loid)s in arable soils varied among the sampling sites, and the average values of As and Cd were relatively higher than that of other metals. Results of integrated indices of As and Cd in arable soils located near industrial complex indicated that some arable soils were moderately or heavily polluted. The plant available concentration of heavy metal(loid)s was negatively related to the soil pH and negative charge of soil. Available Cd, Pb, and Zn concentrations had relatively high correlation coefficient with pH and negative charge of soil when compared with other heavy metal(loid)s. Based on the above results, it might be a good soil management to control pH with soil amendments such as lime and compost to reduce phytoavailability of heavy metal(loid)s in arable soil located near industrial complex.