• Journal of the Korean Society of Safety
• /
• v.15 no.4
• /
• pp.157-162
• /
• 2000

A performance measurement system for safety management was suggested with which performance of a company's safety activities can be expressed rationally, and analysis of impact with performance improvement. A key of the measurement system is performance index of the safety management activities, which consists of 3 perspectives; an external perspective, an internal perspective, and a innovation & learning perspective. Every perspective consists of 18 performance indices and each indices consist of activity unit a such planning, support, implementation, evaluation and review.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.3 no.2
• /
• pp.194-203
• /
• 1993

Quality Control programs for industrial hygiene laboratory have successfully been operated since the 1st round was initiated in April 1992. Three rounds have been completed. Overall analytical performance of participants was improved through a subsquent round. The first round had a large variation among analytical results of all participants, 26.34%~504.22% of coefficient of variation. But the variation of analytical performance in the 2nd and 3rd rounds decreased to 40.42%~52.55% and 10.74%~20.98%, respectively. The difference of analytical performance among participants was decreased by operation of subsquent round. By distribution of Running Performance Index (RPI), over 50% of participants belongs to Category 3 in the first round. The average percentage of participants assigned to Category 3 in the 2nd and 3rd round was decreased to 37.2%. A definite analytical performance improvement of participants seems to be obtained. "A" and "B" group have more participants assigned to Category 3 than those of "C" group through the distribution of RPI by group divided to similar participant. By the distribution of RPI all participants, the percent of participant being over 200 RPI in the 1st round was 43%~52%, but decreased to 9%~29% and 9%~27%, in the 2nd and 3rd round, respectively. These results mentioned above indicate that the analytical performance of all participants have been improved by subsquent Quality Control Program although newcomers joined and a few participants droped out. But, there are some participants with poor analytical performance. Industrial Health Research Institute (IHRI) will offer service such as education, communication and visitation to them, and improve quality of their analytical performance in the future.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.3
• /
• pp.7-12
• /
• 2011

In the recent field of 5-axis machine tools, it is necessary to improve machining ability. The tilting index table is a key unit in order to manufacture some non-rotational and 3-dimensional parts by using conventional machining centers. In this study, the structural analysis of a tilting index table is carried out and the displacement and distribution of stress in the tilting index table is analysed to design the table safely. The modal analysis is performed in order to confirm the frequency response about the vibration having a large effect on the machine tools. The dynamic analysis is performed in order to confirm the rigidity, and the structural stability has been verified.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.1
• /
• pp.48-55
• /
• 2002

This paper deals with the sensing ability of the smart sensor that has the sensing ability to distinguish materials according to the input condition changing. This is a study of dynamic characteristics of sensor. We have developed a new signal processing method that can distinguish among different materials. The smart sensor was developed for recognition of materials. Experiments and analysis were executed to estimate ability to recognize objects according to the input condition. First, we developed the advanced smart sensor. Second, we developed the new method, which has the capability sensing of different materials. Dynamic characteristics of the smart sensor were evaluated relatively through a new $R_{SAI}$ method. According to frequency changing, influence of the smart sensor are evaluated through a new recognition index ($R_{SAI}$) that ratio of sensing ability index. Applications of this method are for finding abnormal conditions of objects (auto-manufacturing), feeling of objects (medical product), robotics, safely diagnosis of structure, etc.

• Journal of Information Processing Systems
• /
• v.9 no.2
• /
• pp.287-300
• /
• 2013

Cloud storage is provided as a service in order to keep pace with the increasing use of digital information. It can be used to store data via networks and various devices and is easy to access. Unlike existing removable storage, many users can use cloud storage because it has no storage capacity limit and does not require a storage medium. Cloud storage reliability has become a topic of importance, as many users employ it for saving great volumes of data. For protection against unethical administrators and attackers, a variety of cryptography systems, such as searchable encryption and proxy re-encryption, are being applied to cloud storage systems. However, the existing searchable encryption technology is inconvenient to use in a cloud storage environment where users upload their data. This is because this data is shared with others, as necessary, and the users with whom the data is shared change frequently. In this paper, we propose a searchable re-encryption scheme in which a user can safely share data with others by generating a searchable encryption index and then re-encrypt it.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.20 no.2 s.33
• /
• pp.187-198
• /
• 2007

Background : Atopic dermatitis is a chronic and recurrent allergy eczema, called as 'Tae-yul'. It is a characteristic dermatitis, diagnosed from baby to adult, that carries severe itching. Objectivd : The aim of this trial is to examine the effect and safety of Medibebe in patients with atopic dermatitis. Methods : We made a comparison between before and after the use this product. Volunteers who satisfied the requirements were enrolled in the study. Degrees of severity of atopic dermatitis were measured by SCORAD index. Results : After 4 weeks' use of Medibebe, SCORAD index showed a decrease of $20.0{\pm}10.2$(95% C.I: 17.1-22.9) compared with when it was not applied, which is a statistically meaningful change(p-value<0.0001). Subjective pruritus and Sleeping loss reported after both 2 and 4 weeks' use of Medibebe decreased in a statistically meaningful way(p-value<0.0001) compared with before the application. but, 2 cases out of all 50 subjects for the clinical trial were excluded on the way. Conclusion : As a result of applying the 4 items of Medibebe(cream, lotion, soap, and body cleanser) to patients with atopic dermatitis and watching the progress, it is concluded and considered that these cleansing and moisturizing products can be used by atopic patients safely and effectively with almost no side-effect.

• Geomechanics and Engineering
• /
• v.16 no.2
• /
• pp.125-140
• /
• 2018

Tianjin, which is located on the west shore of the Bohai Sea, is part of China's Circum-Bohai-Sea Region, where very weak clay is deposited. From the 1970s to the early $21^{st}$ century, Tianjin marine clay deposits have been the subject of numerous geotechnical investigations. Because of these deposits' geological complexity, great depositional thickness, high water content, large void ratio, excessive settlement, and low shear strength, the geotechnical properties of Tianjin marine clay need to be summarized and evaluated based on various in situ and laboratory tests so that Tianjin can safely and economically sustain more infrastructure in the coming decades. In this study, the properties of Tianjin marine clay, especially its consolidation properties, are summarized, evaluated and discussed. The focus is on establishing correlations between the geotechnical property indexes and mechanical parameters of Tianjin marine clay. These correlations include the correlations between the water content and the void ratio, the depth and the undrained shear strength, the liquid limit and the compression index, the tip resistance and the constrained modulus, the plasticity index and the ratio of undrained shear strength and the preconsolidation pressure. In addition, the primary consolidation properties of Tianjin marine clay, such as the intrinsic compression line (ICL), sedimentation compression line (SCL), compression index, $C_c$, coefficient of consolidation, $C_v$, and hydraulic conductivity change index, $C_{kv}$, are evaluated and discussed. A secondary consolidation property, i.e., the secondary compression index, $C_a$, is also investigated, and the results show that the ratio of $C_a/C_c$ for Tianjin marine clay can be used to calculate $C_a$ in secondary consolidation settlement predictions.

• Journal of the Korean Institute of Navigation
• /
• v.15 no.1
• /
• pp.49-65
• /
• 1991

It is of great importance for any vessel under way, especially in rough sea, to be maneuvered safely with proper seakeeping performance. In this paper, the author aims to develope a navigational safety evaluation system in rough sea by analyzing ship's with the theory of wave spectrum using random process analysis and the theory of evaluating the seakeeping performance. The scope and the method of this study are as follows ; (1) Modelized typhoon mathematically to represent the sea condition in rough sea. (2) Estimated sea conditions by getting wave spectrum, supposing that the wave by typhoon is fully developed short crest irregular wave. (3) Defined evaluation factor of vessel's seakeeping performance and obtained response amplitude operators thereby. (4) Obtained the response spectrum of factors on seakeeping performance. (5) Defined and obtained evaluation index, dangerousness, relative and maximum dangerousness of factors on seakeeping performance. (6) Analyzed the calculated dangerousness of evaluation index and picked the vertical acceleration out of 7 factors as the presentative factor on seakeeping performance. (7) Carrid out the judgement of danger by obtaining dangerousness value according to steaming hour, course alteration and speed change. By synthesizing the above items, the authors suggests a computer model of navigational safety evaluation system and examined the validity of the model by computer simulation.

• Structural Engineering and Mechanics
• /
• v.48 no.3
• /
• pp.291-308
• /
• 2013

Structural health monitoring is crucial to maintain the structural performance safely. Moreover, the Kullback-Leibler divergence (KLD) is applied usually to asset the similarity between different probability density functions in the pattern recognition. In this study, the KLD is employed to detect the damage. However the asymmetry of the KLD is a shortcoming for the damage detection, to overcoming this shortcoming, two other divergences and one statistic distribution are proposed. Then the damage identification by the KLD and its three descriptions from the symmetric point of view is investigated. In order to improve the reliability and accuracy of the four divergences, the gapped smoothing method (GSM) is adopted. On the basis of the damage index approach, the new damage index (DI) for detect damage more accurately based on the four divergences is developed. In the last, the grey relational coefficient and hypothesis test (GRCHT) is utilized to obtain the more precise damage identification results. Finally, a clear remarkable improvement can be observed. To demonstrate the feasibility and accuracy of the proposed method, examples of an isotropic beam with different damage scenarios are employed so as to check the present approaches numerically. The final results show that the developed approach successfully located the damaged region in all cases effect and accurately.

• Journal of Korean Clinical Health Science
• /
• v.11 no.1
• /
• pp.1625-1631
• /
• 2023

Purpose The The purpose of this study was to clinically evaluate the efficacy and safety of a self-whitening patch containing a primer containing taurine and 3.0% hydrogen peroxide. Methods A double-blind randomized clinical trial was conducted on 55 subjects. The whitening patches containing 3.0% hydrogen peroxide were applied to the labial surfaces of maxillary six anterior teeth once daily for 30 minutes using a primer, and whitening efficacy was measured by △E^* values before application and at 3, 5, 7, and 10 days after application. Stability was determined using the Gingival index (GI) and visual analogue scale (VAS). Results Changes in △E^* values were clinically recognizable as early as day 5 after patch application, and whitening effects were visible by day 7. There was no statistically significant difference in gingival index (p=0.069). Conclusions Self-whitening patches using primer and 3.0% hydrogen peroxide applied once daily for 30 minutes showed effective whitening effect from the 5th day after application and could be used safely without significant side effects.