Structural Engineering and Mechanics

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Damage detection using the improved Kullback-Leibler divergence

  • Tian, Shaohua (Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University) ;
  • Chen, Xuefeng (Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University) ;
  • Yang, Zhibo (Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University) ;
  • He, Zhengjia (Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University) ;
  • Zhang, Xingwu (Key Laboratory for Manufacturing Systems Engineering, Xi'an Jiaotong University)
  • Received : 2013.07.11
  • Accepted : 2013.10.17
  • Published : 2013.11.10
⟨ Previous Next ⟩

Abstract

Structural health monitoring is crucial to maintain the structural performance safely. Moreover, the Kullback-Leibler divergence (KLD) is applied usually to asset the similarity between different probability density functions in the pattern recognition. In this study, the KLD is employed to detect the damage. However the asymmetry of the KLD is a shortcoming for the damage detection, to overcoming this shortcoming, two other divergences and one statistic distribution are proposed. Then the damage identification by the KLD and its three descriptions from the symmetric point of view is investigated. In order to improve the reliability and accuracy of the four divergences, the gapped smoothing method (GSM) is adopted. On the basis of the damage index approach, the new damage index (DI) for detect damage more accurately based on the four divergences is developed. In the last, the grey relational coefficient and hypothesis test (GRCHT) is utilized to obtain the more precise damage identification results. Finally, a clear remarkable improvement can be observed. To demonstrate the feasibility and accuracy of the proposed method, examples of an isotropic beam with different damage scenarios are employed so as to check the present approaches numerically. The final results show that the developed approach successfully located the damaged region in all cases effect and accurately.

Keywords

References

  1. Abdo, M.B. (2012), "Parametric study of using only static response in structural damage detection", Engineering Structures, 34, 124-131. https://doi.org/10.1016/j.engstruct.2011.09.027
  2. Baneen, U., Kinkaid, N.M., Guivant, J.E. and Herszberg, I. (2012) "Vibration based damage detection of a beam-type structure using noise suppression method", Journal of Sound and Vibration, 331, 1777-1788. https://doi.org/10.1016/j.jsv.2011.12.018
  3. Choi, S. and Stubbs, N. (2004) "Damage identification in structures using the time-domain response", Journal of Sound and Vibration, 275, 577-590. https://doi.org/10.1016/j.jsv.2003.06.010
  4. Cornwell, P., Doebling, S.W. and Farrar, C.R. (1999), "Application of the strain energy damage detection method to plate-like structures", Journal of Sound and Vibration, 224, 359-374. https://doi.org/10.1006/jsvi.1999.2163
  5. Eguchi, S. and Copas, J. (2006), "Interpreting Kullback-Leibler divergence with the Neyman-Pearson lemma", Journal of Multivariate Analysis, 97, 2034-2040. https://doi.org/10.1016/j.jmva.2006.03.007
  6. Fan, W. and Qiao, P.Z. (2011), "Vibration-based damage identification methods: a review and comparative study", Structural Health Monitoring, 10, 83-111. https://doi.org/10.1177/1475921710365419
  7. Farrar, C.R. and Jauregui, D.A. (1998a), "Comparative study of damage identification algorithms applied to a bridge: I. experiment", Smart Materials and Structures, 7, 704. https://doi.org/10.1088/0964-1726/7/5/013
  8. Farrar, C.R. and Jauregui, D.A. (1998b), "Comparative study of damage identification algorithms applied to a bridge: II. Numerical study", Smart Materials and Structures, 7, 720. https://doi.org/10.1088/0964-1726/7/5/014
  9. Fu, C., Zheng, J., Zhao, J. and Zhu, W.D. (2001), "Application of grey relational analysis for corrosion failure of oil tubes", Corrosion Science, 43, 881-889. https://doi.org/10.1016/S0010-938X(00)00089-5
  10. Hamey, C.S., Lestari, W., Qiao, P. and Song, G.B. (2004), "Experimental damage identification of carbon/epoxy composite beams using curvature mode shapes", Structural Health Monitoring, 3, 333-353. https://doi.org/10.1177/1475921704047502
  11. Hershey, J.R. and Olsen, P.A. (2007), "Approximating the Kullback Leibler divergence between Gaussian mixture models", Acoustics, Speech and Signal Processing, ICASSP 2007, IEEE International Conference on. IV-317-IV-320.
  12. Kim, B.H., Park, T. and Voyiadjis, G.Z. (2006), "Damage estimation on beam-like structures using the multi-resolution analysis", International Journal of Solids and Structures, 43, 4238-4257. https://doi.org/10.1016/j.ijsolstr.2005.07.022
  13. Koo, K., Sung, S., Park, J. and Jung, H.J. (2010), "Damage detection of shear buildings using deflections obtained by modal flexibility", Smart Materials and Structures, 19, 115026. https://doi.org/10.1088/0964-1726/19/11/115026
  14. Lestari, W., Qiao, P. and Hanagud, S. (2007), "Curvature mode shape-based damage assessment of carbon/epoxy composite beams", Journal of Intelligent Material Systems and Structures, 18, 189-208. https://doi.org/10.1177/1045389X06064355
  15. Li, Y.Y. (2010), "Hypersensitivity of strain-based indicators for structural damage identification: a review", Mechanical Systems and Signal Processing, 24, 653-664. https://doi.org/10.1016/j.ymssp.2009.11.002
  16. Limongelli, M. (2010), "Frequency response function interpolation for damage detection under changing environment", Mechanical Systems and Signal Processing, 24, 2898-2913. https://doi.org/10.1016/j.ymssp.2010.03.004
  17. Limongelli, M. (2011), "The interpolation damage detection method for frames under seismic excitation", Journal of Sound and Vibration, 330, 5474-5489. https://doi.org/10.1016/j.jsv.2011.06.012
  18. Maia, N., Silva, J., Almas, E. and Sampaio, R.P.C. (2003), "Damage detection in structures: from mode shape to frequency response function methods", Mechanical Systems and Signal Processing, 17, 489-498. https://doi.org/10.1006/mssp.2002.1506
  19. Mathiassen, J.R., Skavhaug, A. and Bø, K. (2002), Texture similarity measure using Kullback-Leibler divergence between gamma distributions, Computer Vision-ECCV 2002, Springer.
  20. Ming, Y., Chen, J. and Dong, G. (2011), "Weak fault feature extraction of rolling bearing based on cyclic Wiener filter and envelope spectrum", Mechanical Systems and Signal Processing, 25, 1773-1785. https://doi.org/10.1016/j.ymssp.2010.12.002
  21. Mitra, P., Murthy, C. and Pal, S.K. (2002), "Unsupervised feature selection using feature similarity", IEEE Transactions on Pattern Analysis and Machine Intelligence, 24, 301-312. https://doi.org/10.1109/34.990133
  22. Nichols, J.M., Trickey, S.T. and Seaver, M. (2006), "Damage detection using multivariate recurrence quantification analysis", Mechanical Systems and Signal Processing, 20, 421-437. https://doi.org/10.1016/j.ymssp.2004.08.007
  23. Pedro, J., Mereno, P.P.H. and Vasconcelos, N. (2004), "A Kullback-Leibler divergence based Kernel for SVM classification in multimedia applications" , Advances in Neural Information Processing Systems, 16, 9.
  24. Puzicha, J., Hofmann, T. and Buhmann, J.M. (1997), "Non-parametric similarity measures for unsupervised texture segmentation and image retrieval", Computer Vision and Pattern Recognition, Proceedings od IEEE Computer Society Conference on IEEE, 267-272.
  25. Radzienski, M., Krawczuk, M. and Palacz, M. (2011), "Improvement of damage detection methods based on experimental modal parameters", Mechanical Systems and Signal Processing, 25, 2169-2190. https://doi.org/10.1016/j.ymssp.2011.01.007
  26. Ratcliffe, C.P. (1997), "Damage detection uusing a modified laplacian operator on mode shape data", Journal of Sound and Vibration, 204, 505-517. https://doi.org/10.1006/jsvi.1997.0961
  27. Ratcliffe, C.P. (2000), "A frequency and curvature based experimental method for locating damage in structures", Journal of Vibration and Acoustics, 122, 6.
  28. Rubner, Y., Puzicha, J., Tomasi, C. and Buhmann, J.M. (2001), "Empirical evaluation of dissimilarity measures for color and texture", Computer Vision and Image Understanding, 84, 25-43. https://doi.org/10.1006/cviu.2001.0934
  29. Sampaio, R., Maia, N. and Silva, J. (1999), "Damage detection using the frequency-response-function curvature method", Journal of Sound and Vibration, 226, 1029-1042. https://doi.org/10.1006/jsvi.1999.2340
  30. Sekhar, A.S. (2008), "Multiple cracks effects and identification", Mechanical Systems and Signal Processing, 22, 845-878. https://doi.org/10.1016/j.ymssp.2007.11.008
  31. Smith, A., Naik, P.A. and Tsai, C.L. (2006), "Markov-switching model selection using Kullback-Leibler divergence", Journal of Econometrics, 134, 553-577. https://doi.org/10.1016/j.jeconom.2005.07.005
  32. Stubbs, N. and Kim, J.T. (1996), "Damage localization in structures without baseline modal parameters", AIAA Journal, 34, 1644-1649. https://doi.org/10.2514/3.13284
  33. Stubbs, N., Kim, J.T, and Farrar, C. (1995), "Field verification of a nondestructive damage localization and severity estimation algorithm", Proceedings of SPIE the International Society for Optical Engineering, 210-210.
  34. Sun, C. et al. (2013) "Manifold subspace distance derived from kernel principal angles and its application to machinery structural damage assessment ", Smart Materials and Structures, 22, 085012. https://doi.org/10.1088/0964-1726/22/8/085012
  35. Wang, S., Huang, W. and Zhu, Z. (2011a), "Transient modeling and parameter identification based on wavelet and correlation filtering for rotating machine fault diagnosis", Mechanical Systems and Signal Processing, 25, 1299-1320. https://doi.org/10.1016/j.ymssp.2010.10.013
  36. Wang, Z., Chen, J. and Dong, G. et al. (2011b) "Constrained independent component analysis and its application to machine fault diagnosis", Mechanical Systems and Signal Processing, 25, 2501-2512. https://doi.org/10.1016/j.ymssp.2011.03.006
  37. Wu, D. and Law, S.S. (2004), "Damage localization in plate structures from uniform load surface curvature", Journal of Sound and Vibration, 276, 227-244. https://doi.org/10.1016/j.jsv.2003.07.040
  38. Xiang, J., Matsumoto, T., Long, J. et al. (2012a), "A simple method to detect cracks in beam-like structures", Smart Structures and Systems, 9, 335-353. https://doi.org/10.12989/sss.2012.9.4.335
  39. Xiang, J., Matsumoto, T. and Wang, Y. et al. (2012b), "Detect damages in conical shells using curvature mode shape and wavelet finite element method ", International Journal of Mechanical Sciences, 66, 83-93.
  40. Yan, A.M. and Golinval, J.C. (2006), "Null subspace-based damage detection of structures using vibration measurements", Mechanical Systems and Signal Processing, 20, 611-626. https://doi.org/10.1016/j.ymssp.2005.04.010
  41. Yang, Z., Chen, X. and Yu, J. et al. (2013), "A damage identification approach for plate structures based on frequency measurements", Nondestructive Testing and Evaluation, 1-21.
  42. Yoon, M.K. et al. (2001), "Local damage detection using a global fitting method on mode shape data", Bellingham, WA, ETATS-UNIS: Society of Photo-Optical Instrumentation Engineers.
  43. Yoon, M.K., Heider, D., Gillespie, Jr., J.W., Ratcliffe, C.P. and Crane, R.M. (2005) "Local damage detection using the two-dimensional gapped smoothing method", Journal of Sound and Vibration, 279, 119-139. https://doi.org/10.1016/j.jsv.2003.10.058