• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.5
• /
• pp.1646-1652
• /
• 2010

The communication in wireless sensor network is divided into several layers, because of each of them do their role, the wireless communication is possible, the MAC (Medium Access Control) layer of the one of sensor network communications layer is used to the data errors, control flow, and manage resources. Using MAC Protocol, it ensures the communication between sensor node. In this paper, highlighted the energy efficiency of the S-MAC, T-MAC protocol it emphasized the efficiency of energy by lessening the woken time of all nods effectively, transmitting and receiving the control packet on only necessary nods through use of a method that RTS packet is added to SYNC packet and making other nods sleep. On sending SYNC+RTS packet and receiving the packet, nod noticed that it wasn't necessary to be awaked on this period, would be in Sleep mode, demonstrated mathematically that energy is more effective than existing protocol, and simulated with MATLAB.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.4C
• /
• pp.358-363
• /
• 2010

In IEEE 802.15.4a IR-UWB (Impulse Radio Ultra Wideband) systems, it is crucial to acquire initial carrier/timing synchronization and estimate channel response by exploiting the SYNC symbols embedded in each packet. On the other hand, it is also crucial to detect the SFD pattern followed by the header and data symbols to reliably extract the information contained in the packet. In this paper, we propose a reliable SFD detection scheme utilizing some surplus SYNC symbols in addition to SFD symbols to improve the SFD detection performance.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.4
• /
• pp.177-184
• /
• 2008

The design goal of protocols in wireless sensor networks (WSN) is mainly energy efficiency because of their stringent resource and energy constraints. In this paper, we propose a simple cross-layered protocol for WSNs, so called EATD(Energy-Aware Tree based Delivery scheme). EATD is a tree-based energy aware data delivery algorithm by using a SYNC packet with link and node cost to maximize the network lifetime. Our simulation results show significant improvements compared with existing schemes in terms of energy efficiency and delay.

• Journal of Broadcast Engineering
• /
• v.8 no.3
• /
• pp.259-267
• /
• 2003

In this paper, we propose a media processor to provide interactive services in mobile multimedia broadcasting environments. The proposed system Is designed to support various functionalities, such as generation of MPEG-4 IOD (Initial Object Descriptor)/OD(Object Descriptor)/BIFS (Binary Format for Scene) data, encapsulation of MPEG-4 AVC (Advanced Video Coding)/BSAC (Bit Sliced Arithmetic Coding) stream and generated IOD/OD/BIFS data into SL (Sync Layer) packet, packetization of SL packet into TS (Transport Stream) packet and multiplexing. The proposed media processor can provide MPEG-4 based interactive services for users.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.3
• /
• pp.19-27
• /
• 2011

Due to the growth of optical fiber network technologies, most networks recently support several tens of Gb/s bandwidth. UDT(UDP-based Data Transfer protocol) is an optimized protocol for bulk data transmission on the network, which has the high bandwidth and long delay time. It periodically controls the sending rate on the fixed sync-interval, 0.01 sec. Here, if the network traffic status varies quickly, available network bandwidth is not able to be properly utilized in-between the sync-intervals. In this paper, we propose an adaptive rate control method with considering the network traffic status in-between the sync-interval periods. The network traffic status is determined based on the RTT variances. With dividing the network status into four classes, the proposed method performs a new rate control by adjusting the inter-packet sending period for a corresponding class. As a simulation result, the proposed method improves the message delivery throughput as well as stability than that of the existing UDT Protocol.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.291-292
• /
• 2014

High-speed video transmission modes of master bridge IC are implemented, which supports MIPI (Mobile Industry Processor Interface) DSI (Display Serial Interface) standard. MIPI DSI master bridge IC sends RGB data and various commands to display module (slave) in order to test it. The master bridge IC consists of buffers storing video data of two lines, packet generation block, and D-PHY layer that distributes packets to data lanes and transmits them to slave. In addition, it supports four bpp (bit per pixel) formats and three transmission modes including Burst and Non-Burst (Sync Events, Sync Pulses types). The designed bridge IC is verified by RTL simulations showing that it functions correctly for various operating parameters.

• Journal of Korea Multimedia Society
• /
• v.5 no.2
• /
• pp.206-214
• /
• 2002

In this paper, it is designed and verified the baseband system that performs various protocol functions of specification of the Bluetooth system. In order to verify the developed circuits, various baseband functions are tested by using the ModelSim simulator. The developed circuits operate at 4MHz main clock. Test suite includes hap selection function, generation of the sync word, error correction(1/3 rate FEC, 2/3 rate FEC), HEC generation/checking, CRC generation/checking, data whitening/dewhitening and packet trans/reception procedure. etc. As a result of the simulation, it is verified that the developed baseband system conform to the specification of the Bluetooth system.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.6
• /
• pp.819-827
• /
• 2013

Compared to legacy frequency hopping communications, future radio communications are required the secure and high data rate, ad-hoc network communication. In this paper, we have designed the network communication structure on the frequency hopping mode, and analyzed the performance of synchronization on the frequency hopping network radio systems. The design results are shown the initial sync. phase of approximately 9 hops and the traffic packet phase of approximately 30 hops. Also, we have simulated the performance on the communication conditions which are carrier bandwidth of 50kHz, user data rate of 64kbps and OQPSK modulation scheme in AWGN. In the simulation, we analyzed the correlation and the performance of synchronization success. The result of simulation show 99% probability for synchronization success at $E_b/N_o$ -4dB.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.102-105
• /
• 1999

AAL type 2 provides for the bandwidth efficient transmission of low bit rate, short and variable packets in delay sensitive application. The service object for these networks ranges from POTS to multimedia conference. In this paper, we present one possible architecture which common part sublayer for new AAL type 2. The proposed CPS function has been achieved with on a FPGA The proposed architecture is faithful to the standardization of ITU-T and ATM-forum recommendation The proposed architecture applies to variable packet length from architecture CODECs for cellular network.. It's maximum process capability is 155Mbps with 256 CIDs. The architecture has sync./async. interface to application block and UTOPIA interface is used for physical layer interface.

• The KIPS Transactions:PartC
• /
• v.18C no.1
• /
• pp.15-22
• /
• 2011

Usually time synchronization is performed after routing tree is constructed. This thesis proposes a time synchronization algorithm combined with single-flooding routing tree construction algorithm in a single path. TSRA (Time Synchronization Routing Algorithm) uses routing packets to construct a routing tree. Two types of time information are added to the routing packet: one is the packet receiving time, and the other is the packet sending time. Time offset and transmission time-delay between parent node and child node could be retrieved from the added time information using LTS (Lightweight Time Synchronization) algorithm. Then parent node sends the time offset and transmission time to children nodes and children nodes can synchronize their time to the parent node time along the routing tree. The performance of proposed algorithm is compared to the TPSN (Timing-sync Protocol for Sensor Networks) which is known to have high accuracy using NS2 simulation tool. The simulation result shows that the accuracy of time synchronization is comparable to TPSN, the synchronization time of all sensor nodes is faster than TPSN, and the energy consumption is less than TPSN.