• Journal of Biomedical Engineering Research
• /
• v.16 no.3
• /
• pp.309-316
• /
• 1995

RF (radio-frequency) probes of Nuclear Magnetic Resonance are one of the important factors and should be designed and built properly depending upon the geometry of the samples and the information. In general there are two kinds of rf probes : one encircles the sample while the other is placed on the surface of the sample. However, in case that the samples on human internal organs have a tube shape, the two kinds of rf probes, as specified above, are usually unsuitable for the internal imaging due to the degradation of signal-to-noise ratios (SNR's). In this case a probe should be positioned as close to the area as possible by putting the probe in the tubelike sample to improve filling factor In the present study inside-out probes have been constructed in the three different shapes such as an anti-solenoidal, a saddle and a dual surface types. RF-field distributions have also been calculated depending upon the geometrical changes of anti-solenoid probes. Moreover, the performance of the inside-out probes has been checked by measuring SNR's of the images acquired. The inside-out probes constructed in this study produced better SWR's and rf-field uniformity in the area close to the probes in comparing with any other commercial probes. There is a high feasibility that the constructed probes in the present study are applicable to the diagnosis of human bodies.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.7
• /
• pp.3140-3145
• /
• 2012

In this paper, a design method for a compact slot antenna fed by a coplanar waveguide (CPW) is studied. A T-shaped tuning stub is inserted inside a narrow rectangular slot and the slot is impedance matched to the CPW feedline by adjusting the width, length, and position of the stub. The resonance frequency is adjustable by the slot length and the antenna size can be reduced by bending the slot. The resonance frequency and impedance matching property of the compact slot antenna are similar to those of the half-wavelength slot antenna, which enables one to design compact antenna of this type with ease. A compact slot antenna for 2.45-GHz ISM band is designed, fabricated on an FR4 substrate (dielectric constant of 4.4 and thickness of 0.8 mm), and experimentally tested. The measured results agree well with the simulations, which confirms the validity of this study. The fabricated compact slot antenna shows an impedance bandwidth of 200 MHz(2.32-2.52 GHz) for a VSWR < 2, which is suitable for 2.45-GHz ISM band (2.4-2.48 GHz). The measured radiation patterns show ${\infty}$-shaped directional pattern in the E-plane and nearly omni-directional pattern in the H-plane with a peak gain of 2.0 dBi, which are similar to those of a monopole antenna. The proposed antenna is expected to be suitable for the applications as antennas for WLAN, RFID, and mobile handset.

• Journal of Microbiology and Biotechnology
• /
• v.26 no.12
• /
• pp.2159-2170
• /
• 2016

Many plant-pathogenic bacteria are dependent on quorum sensing (QS) to evoke disease. In this study, the population of QS and quorum quenching (QQ) bacteria was analyzed in a consecutive monoculture system of Pseudostellaria heterophylla. The isolated QS strains were identified as Serratia marcescens with SwrIR-type QS system and exhibited a significant increase over the years of monoculture. Only one QQ strain was isolated from newly planted soil sample and was identified as Bacillus thuringiensis, which secreted lactonase to degrade QS signal molecules. Inoculation of S. marcescens to P. heterophylla root could rapidly cause wilt disease, which was alleviated by B. thuringiensis. Furthermore, the expression of lactonase encoded by the aiiA gene in S. marcescens resulted in reduction of its pathogenicity, implying that the toxic effect of S. marcescens on the seedlings was QS-regulated. Meanwhile, excess lactonase in S. marcescens led to reduction in antibacterial substances, exoenzymes, and swarming motility, which might contribute to pathogensis on the seedlings. Root exudates and root tuber extracts of P. heterophylla significantly promoted the growth of S. marcescens, whereas a slight increase of B. thuringiensis was observed in both samples. These results demonstrated that QS-regulated behaviors in S. marcescens mediated by root exudates played an important role in replanting diseases of P. heterophylla.

• Journal of Animal Science and Technology
• /
• v.46 no.4
• /
• pp.525-536
• /
• 2004

The objective of this study was to identify the quantitative traits loci(QTL) for meat quality traits in pigs. Three-generation resource population was constructed from a cross between Korean native boars and Landrace sows. The resource population including founders, $F_1$ and $F_2$ was genotyped for 23 microsatellite markers on chromosome 7. The sex average total length of linkage map on chromosome 7 was estimated 154.6 cM. Meat quality traits including meat pH, meat color, drip loss, shear force, heating loss, crude fat, crude protein, crude ash and water content in muscle were collected from $F_2$ animals. For the QTL mapping, we used $F_2$ QTL Analysis Servlet of QTL express for web-based QTL mapping tools(http://qtl.cap.ed.ac.uk/). The QTLs for CIE-a and CIE-b on SSC7 were significantly detected at 1% and 5% chromosome-wide level, respectively.

• Korean Journal of Materials Research
• /
• v.9 no.3
• /
• pp.274-281
• /
• 1999

Usually sputtering and electroless plating methods were used for manufacturing metal-alloy thin film magnetic memory devices. Since electroless plating method has many merits in mass production and product variety com­pared to sputtering method, many researches about electroless plating have been performed in the United State of America and Japan. However, electroless plating method has not been studied frequently in Korea. In these respects the purpose of this research is manufacturing Co-Mn-P alloy thin film on the corning glass 2948 by electroless plating method using sodium hypophosphite as a reductant, and analyzing deposition rate, alloy composition, microstructure, and magnetic characteristics at various pH's and temperatures. For Co-P alloy thin film, the reductive deposition reaction 0$\alpha$urred only in basic condition, not in acidic condition. The deposition rate increased as the pH and temperature increased, and the optimum condition was found at the pH of 10 and the temperature of $80^{\circ}C$. Also magnetic charac­teristics was found to be most excellent at the pH of 9 and the temperature of $70^{\circ}C$, resulting in the coercive force of 8700e and the squareness of 0.78. At this condition, the contents of P was 2.54% and the thickness of the film was $0.216\mu\textrm{m}$. For crystal orientation, we could not observe fcc for $\beta$-Co. On the other hand,(1010), (0002), (1011) orientation of hcp for a-Co was observed. We could confirm the formation of longitudinal magnetization from dominant (1010) and (1011) orientation of Co-P alloy. For Co-Mn-P alloy deposition, coercive force was about 1000e more than that of Co P alloy, but squareness had no difference. For crystal orientation, (l01O) and (lOll) orientation of $\alpha$-Co was dominant as same as that of Co- P alloy. Likewise we could confirm the formation of longitudinal magnetization.

• Journal of Korean Society of Forest Science
• /
• v.100 no.4
• /
• pp.598-608
• /
• 2011

The purpose of this study was to examine potential effects of shading and fertilizing treatment - two basic applicable factors in production of 1-year-old container seedling - on growth and seedling quality of Quercus myrsinaefolia, one of evergreen tree species in warm temperate zone of Korean. Every experimental process was conducted in a facility that consisted of compartments under the lighting control with full sunlight and shading (35%, 55% and 75% of full sunlight). Based on fertilizing treatment, this study made an experiment in 4 groups of container seedling: control (non-treated seedlings) and 1000, 2000, 3000 ppm group (3 groups with different concentrations of water-soluble fertilizer (N:P:K=19:19:19, v/v). Seedlings under 55% shading with 2000 ppm concentration showed the highest height (totaling 21.1 cm), and under 35% shading with 2000 ppm concentration showed the highest root collar diameter growth (totaling 3.96 mm) among others. All three fertilizing groups except control showed H/D ratio ranging from 4.27 to 5.26 regardless of fertilizer concentration under 35% and 55% shading where container seedlings showed a tendency toward excellent growth of height and root collar diameter. Overall, 2000 ppm group under 55% shading showed highest dry mass production of leaves (1,292 g) among others, while 2000 ppm group under 35% shading showed highest dry mass production of shoots and roots (0.592 g and 0.998 g, respectively) among others. Also, it was found that 2000 ppm group under 35% shading showed the highest dry mass production of whole seedling, which was followed by 2000 ppm group under 55% shading and 3000 ppm group under 35% shading, respectively. According to analysis on LWR of Quercus myrsinaefolia depending on shading and fertilizing treatment, it was found that 3000 ppm group under 75% shading showed highest LWR level among others, whereas every fertilized group showed lower RWR level than control without fertilizing regardless of shading levels. In general, all fertilized groups under 55% shading had relatively high quality index (QI), and 2000 ppm group under 35% shading had highest QI among others. Based on the findings of this study, it is concluded that shading level ranging from 35 to 55% and fertilizing concentration of 2,000 ppm are suitable for producing 1-year-old container seedlings of Quercus myrsinaefolia with excellent growth and high quality index.

• Korean Journal of Plant Resources
• /
• v.36 no.2
• /
• pp.172-180
• /
• 2023

In the current study, four groups; control, 500, 1000, and 2000 mg/L, were treated to investigate the effects of physiological and growth characteristics on Machilus thunbergii under various fertilization levels. As a result of the physiological response to the fertilization treatment, the fertilized group demonstrated relatively higher levels of A, ITE, WUEi, V_camx, PI_abs, and SFI_abs in comparison to the control. The best photosynthetic mechanism was most clearly seen at 1000 mg/L, which involved gas exchange through active stomatal opening and closing. For a productive photosynthetic mechanism. As seen in the growth response of M. thunbergii to fertilization treatment, the fertilized group has significantly higher height, DRC, leaf dry weight, stem dry weight, total dry weight, LWR, and SWR than the control group. A healthy seedling quality index was particularly evident at 1000 mg/L, and other growth indicators were also at a decent level. 500 mg /L also demonstrated growth characteristics that were comparable to those at 1000 mg/L. As a result, M. thunbergii featured the best physiological and growth characteristics in response to the fertilization treatment at 1000 mg/L, and 500 mg/L also showed a similar trend, which is considered to be a good option from an economical perspective.