• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.403-403
• /
• 2023

도시화로 인한 생활, 공업, 농업용수의 수요는 증가하지만, 이를 해결하기 위한 댐 건설은 생태계의 단절, 수몰 지역 생성 등의 이유로 비판적인 여론이 많아 신규 수자원 확보가 어려워지고 있다. 따라서 우리는 신규 수자원을 확보하기보다 기존 수자원의 물관리 체계를 개선하고 합리적인 물 배분 기술을 개발할 필요가 있다. 이중 농업용수의 회귀 수량에 대하여 알아볼 필요가 있다. 수리 시설물에서 공급된 농업용수는 전량 작물에 의해 소비되는 것이 아니며, 포장으로 공급되지 않고 용수로를 통해 배수되기도 한다. 포장으로 공급된 수량은 물꼬를 넘어 배수되기도 하고, 일부는 침투되어 지하수를 통해 흘러나가기도 한다. 이 와 같이, 농업용수 공급량 중 소모되지 않고 하천으로 유입되는 수량을 관계 회귀 수량이라 한다. 따라서 본연구에서는 농업에 소모되지 않고 하천으로 유입되는 회귀수량을 정확히 조절할 수 있도록 농업용수 회귀수량을 계산하는 모델을 구현하였다. SWMM(Storm Water Management Model)은 도로, 도랑, 관로, 초지 등 주로 도시지역의 강우-유출-지표면 유출을 해석하는 모델이며 농지의 수로네트워크 특성을 잘 반영할 수 있다는 장점이 있다. 이번 연구에서는 용수로를 개수로로 고려하여 테스트베드 모형을 구축할 것이다. SWMM은 농업용수 물순환 모의를 위해 이미 활용되고 있으나 논에서의 증산량이 미반영되며 수혜지역 내의 지하수위가 미반영 되는 등 정확한 물순환 모의를 위해서 한계점 개선이 필요하다. 이 한계점 개선을 위해서 회귀수량 공식을 c언어로 구현 후 EPA SWMM의 소스코드를 활용하여 회귀수량 추정이 가능한 SWMM을 구현하였다. 해당 연구를 통해 농업용수의 회귀수량을 계산하여 정확한 물수지 분석이 가능하여 농업지역의 수자원 확보에 도움을 줄 것이다.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.4
• /
• pp.105-117
• /
• 2010

The topographical depressions in urban areas, the lack in drainage capability, sewage backward flow, road drainage, etc. cause internal inundation, and the increase in rainfall resulting from recent climate change, the rapid urbanization accompanied by economic development and population growth, and the increase in an impervious area in urban areas deteriorate the risk of internal inundation in the urban areas. In this study, the vulnerability of internal inundation in urban areas is analyzed and SWMM model is applied into Oncheoncheon watershed, which represents urban river of Busan, as a target basin. Based on the results, the representative storm sewers in individual sub-catchments is selected and the risk of vulnerability to internal inundation due to rainfall in urban streams is analyzed. In order to analyze the risk and vulnerability of internal inundation, capacity is applied as an index indicating the volume of a storm sewer in the SWMM model, and the risk of internal inundation is into 4 steps. For the analysis on the risk of internal inundation, simulation results by using a SMMM model are compared with the actual inundation areas resulting from localized heavy rain on July 7, 2009 at Busan and comparison results are analyzed to prove the validity of the designed model. Accordingly, probabilistic rainfall at Busan was input to the model for each frequency (10, 20, 50, 100 years) and duration (6, 12, 18, 24hr) at Busan. In this study, it suggests that the findings can be used to preliminarily alarm the possibility of internal inundation and selecting the vulnerable zones in urban areas.

• Journal of Korea Water Resources Association
• /
• v.31 no.3
• /
• pp.253-267
• /
• 1998

In this study, ILLUDAS and SWMM were applied for Dongsucheon basin, Incheon and Test basin, Cheongju. The main parameters (II, IA, IS, SI, SR, SS) which are included in those of each model depending on runoff results were determined, and sensitivity ratios were estimated in order to evaluate and compare the characteristics of each modEL. Total runoff ratio for almost parameters turned out to have a linear relation to the rainfall durations and the scale of basin area but have nothing to do with rainfall distributions. Sensitivity ratios turned out to have a linear relation for the infiltration and soil parameters of ILLUDAS as well as all parameters of SWMM. ronoff sensitivity ratios for almost parameters were smaller than 1.0 because the impacts of total runoff were bigger than those of peak runoff. And runoff sensitivity ratio was equal to 1.0 for the roughness coefficient of SWMM. Total runoff ratio, peak runoff ratio and runoff sensitivity ratio for the selected parameters of those models were presented asthe tables and figures according to the scale of basin area, rainfall durations such as 60, 120, and 180 minutes and Huff's 4th quartiles rainfall distributions. Keywords : ILLUDAS, SWMM, parameter, sensitivity analysis, sensitivity ratio.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.237-241
• /
• 2006

최근에 들어 도시지역에서는 국지성 집중호우에 의한 홍수피해가 증가하는 경향이 있으며, 우수설비 시스템이 비교적 갖추어진 개발 지역에서도 기존의 우수설비시스템의 용량이 초과되어 큰 침수피해가 발생하고 있다. 홍수규모가 배수시스템의 용량을 초과할 경우 건물, 공공기반시설 등 재산 및 인명 등에 있어 많은 피해를 야기하고 있으며, 도로의 침수는 운송 시스템의 기능에 문제를 일으키게 되어 도시의 산업과 기능을 마비시킨다. 이러한 도시지역 홍수에 대비하여 도시지역의 복잡한 지형 형상과 인위적 배수시스템을 함께 고려하여 해석할 수 있는 침수해석모형의 개발이 필요하다. MOUSE와 SWMM(Storm Water Management Model) 계열 모형들(EPA SWMM, MIKE SWMM, XP SWMM, PC SWMM)(Huber and Dickinson, 1988)은 도시유출해석에 많이 이용되고 있다. 그러나, 이들 모형들은 과부하된 유입구에서의 범람되는 홍수유량곡선만을 제공하며 지표면 범람 지역, 수심, 및 침수기간에 대한 상세한 정보를 제공하지 못한다. 따라서, 도시배수체계모형과 도시침수모형에 대해 상호연계를 수행할 수 있는 새로운 도시범람 모형이 도시지역에서 홍수로 인한 침수해석을 모의하는데 필요하다. 배수시스템 해석 모형의 계산결과를 이용하여 침수해석을 수행하는 연계모형의 경우 침수초기 월류지점으로부터의 침수진행과정을 잘 모의할 수 있다. 그러나, 지형의 기복이 있는 유역에서 배수시스템을 통한 지표침수유량의 배수과정을 고려하지 못함으로 인하여, 월류발생이 끝난 후 일부지점이 계속 침수된 채 있게 된다. 이러한 연계모형의 한계로 인하여 두 모형의 통합모형이 필요하다. 즉, 강우 혹은 월류유량으로 발생한 지표유량 중 일부분이 과부하가 발생하지 않는 유입구 지점을 통과할 때 배수시스템으로 유입되는 것을 고려할 수 있고, 유입된 유량은 배수시스템 내의 흐름에 반영되도록 배수시스템과 침수해석모형을 통합한 모형 개발이 필요하다. 그러기 위해서는 지표면과 배수시스템에 대한 수리학적 관계를 정립하여야 한다. 본 연구에서는 배수시스템 해석 모형과 도시침수해석 모형을 통합하고, 두 모형간의 유량의 전송과정을 수리학적 관계를 고려한 dual-drainage 도시침수해석모형을 개발하였다. 이를 위해 도시지역 배수시스템 해석 모형으로 널리 이용되고 있는 SWMM모형을 이용하여 지표면으로의 월류량을 산정하고 유입된 지표유량에 대해서 배수시스템에서의 흐름해석을 수행하였다. 그리고, 침수해석을 위해서는 2차원 침수해석을 위한 DEM기반 침수해석모형을 개발하였고, 건물의 영향을 고려할 수 있도록 구성하였다. 본 연구결과 지표류 유출 해석의 물리적 특성을 잘 반영하며, 도시지역의 복잡한 배수시스템 해석모형과 지표범람 모형을 통합한 모형 개발로 인해 더욱 정교한 도시지역에서의 홍수 범람 해석을 실시할 수 있을 것으로 판단된다. 본 모형의 개발로 침수상황의 시간별 진행과정을 분석함으로써 도시홍수에 대한 침수위험 지점 파악 및 주민대피지도 구축 등에 활용될 수 있을 것으로 판단된다.

• Journal of Korea Water Resources Association
• /
• v.43 no.10
• /
• pp.893-909
• /
• 2010

The purpose of this study is to consider the interaction between surface water and groundwater in basin scale by developing TANK_GS model. The soil moisture structure of tank model with 3 tanks is improved to simulate the appropriate stream-aquifer interactions. Maximum likelihood method is applied to calibrate parameters with variance functions to deal with heteroscedasticity of residuals. The parameters of improved TANK_GS model and variance function are simultaneously estimated by Simulated Annealing method, a global optimization technique. The results of TANK-GE are compared to those of the SWMM-GE model which had been developed to consider the stream-aquifer interactions. The new TANK_GS model and SWMM-GE model are applied to Gapcheon basin, which belongs to Geum River basin. TANK_GS model showed better model performance compared to the original TANK model and characterized the relationship of stream-aquifer interactions as satisfactorily as the SWMM-GE model. The sustainable groundwater yield can be estimated for the regional water resources planning using the TANK_GS model

• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.5
• /
• pp.149-158
• /
• 2010

Recent rainfall patterns in Korea show that both of the total amount of rainfall and the total number of heavy rain days have been increased. Therefore, the damage resulted from flood disaster has been dramatically increased in Korea. The purpose of the present study is to analyze flooding in an urban area using SWMM linked with FLUMEN. The study area is Suyeong-Mangmi lowland area, Busan, Korea. Suyeong-Mangmi lowland area have been a flooding hazard zone since 1995. The last flooding cases of this area occurred on July 7th and 16th, 2009, and the later flooding case was analyzed in this study. The first step of computation is calculating flow through storm sewers using the urban runoff simulation model of SWMM. The flooding hydrographs are used in the inundation analysis model of FLUMEN. The results of inundation analysis were compared with the real flooding situation of the study area. The real maximum inundation depth was guessed by 1.0 m or more on July 16th. The computation yields the maximum inundation depth of 1.2 m and the result was somewhat overestimated. The errors may be resulted from the runoff simulation and incapability of simulation using FLUMEN for flow into buildings. The models and procedures used in this study can be applied to analysis of flooding resulted from severe rainfall and insufficiency of drainage capacity.

• Journal of the Korean Geophysical Society
• /
• v.9 no.4
• /
• pp.321-331
• /
• 2006

Recently, runoff characteristics of urban area are changing because of the increase of impervious area by rapidly increasing of population and industrialization, urbanization. It needs to extract the accurate topologic and hydrologic parameters of watershed in order to manage water resource efficiently. Thus, this study developed more precise input data and more improved parameter estimating procedures using GIS(Geographic Information System) and GA(Genetic Algorithm). For these purposes, XP-SWMM (EXPert-Storm Water Management Model) was used to simulate the urban runoff. The model was applied to An-Yang stream basin that is a typical Korean urban stream basin with several tributaries. The rules for parameter estimation were composed and applied based on quantity parameters that are investigated through the sensitivity analysis. GA algorithm is composed of these rules and facts. The conditions of urban flows are simulated using the rainfall-runoff data of the study area. The data of area, slope, width of each subcatchment and length, slope of each stream reach were acquired from topographic maps, and imperviousness rate, land use types, infiltration capacities of each subcatchment from land use maps, soil maps using GIS. Also we gave the management scheme of urbanization runoff using XP-SWMM. The parameters are estimated by GA from sensitivity analysis which is performed to analyze the runoff parameters.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.3
• /
• pp.395-406
• /
• 2016

Population and development are concentrated by urbanization. Consequently, the usage of underground area and the riverside area have been increased. By increasing impermeable layer, the urban basin drainage is depending on level of sewer. Flood damage is occurred by shortage of sewer capacity and poor interior drainage at river stage. Many of researches about flood stress the unavailability of connection at the river stage with the internal inundation organically. In this study, flood calculated considering rainfall and combined inland-river. Also, using urban runoff model analyze the overflow of sewer. By using results of SWMM model, using flood inundation analysis model analyzed internal drainage efficiency of drainage system. Applying SWMM model, which results to flood inundation analysis model, analyzes internal drainage efficiency of drainage system under localized heavy rain in a basin of the city. The results of SWMM model show the smoothness of internal drainage can be impossible to achieve because of the influence of the river level and sewer overflow appearing. The main manholes were selected as the manhole of a lot of overflow volume. Overflow reduction scenarios were selected for expansion of sewer conduit and instruction retention pond. Overflow volume reduces to 45% and 33~64% by retention pond instruction and sewer conduit expansion. In addition, the results of simulating of flood inundation analysis model show the flood occurrence by road runoff moving along the road slope. Flooded area reduces to 19.6%, 60.5% in sewer conduit expansion scenarios.

• Journal of Korea Water Resources Association
• /
• v.49 no.12
• /
• pp.981-993
• /
• 2016

This study explains the GIS database of flood inundation area developed for Samsung-1 Drainage Sector, Seoul, Korea. The XP-SWMM dual drainage model was developed for the study area, and the time series observed at the watershed outlet was used to obtain the watershed time of concentration and to calibrate the XP-SWMM model. The rainfall scenario was developed by dividing the 40 minute watershed time of concentration into two 20-minute time steps and then applying the gradually increasing 5 mm/hr interval rainfall intensity to each of the time step up to 200 mm/hr, which is the probable maximum precipitation of the study area. The developed rainfall scenarios was used as the input of the XP-SWMM model to obtain the database of the flood inundation area. The analysis on the developed GIS database revealed that: (1) For the same increment of the rainfall, the increase of the flooded area can be different, and this was caused by topographic characteristics and spatial formation of pipe network of the study area; (2) For the same flooded area, the spatial extent can be significantly different depending on the temporal distribution of rainfall; and (3) For the same amount of the design rainfall, the flood inundation area and the extent can be significantly different depending on the temporal distribution of rainfall.

• Journal of Korea Water Resources Association
• /
• v.39 no.2 s.163
• /
• pp.109-120
• /
• 2006

Permeable pavement and release of treated wastewater into streams can increase streamflow of urban streams for a dry weather period. A SWMM code was modified to have a permeable pavement option. The modified SWMM was applied to continuous simulations of urban runoff from Hakuicheon watershed and it was used to analyse the effect of a permeable pavement installation and the reuse of treated wastewater. A critical error in the pan coefficient multiplication was also corrected in the modification. The analysis results of the reuse of treated wastewater is as follows: The low flow ($Q_{275}$) increases by 1.63 times as much as the current one and the drought flow ($Q_{355}$) increases by 3.57 times as much as the current one. If the impervious area in the Hakuicheon watershed is replaced with the permeable pavement area by 10 percent, the low flow and the drought flow increases by 3 percent and 17 percent, respectively. The results shows the effectiveness of the release of treated wastewater into stream to increase urban streamflow. The permeable pavement installation also play a minor role in the drought flow increase.