• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.4
• /
• pp.75-86
• /
• 1992

This paper reports theoretical and experimental investigation into the added resistance of SWATH ships in waves. It was revealed from the experimental investigations on various SWATH models that the resistance of the SWATH models in waves is considerably reduced over part of the speed range as the wave height increases. As a first step to Identify it, the first and second order wave forces have been investigated barred on a linearised 3-D diffraction theory together with simplified boundary conditions and same results are reported herein. Also, the speed performance of SWATH ships in rough seas is compared with those of equivalent monohulls as well as with those of advanced high speed marine vehicles.

• Journal of the Society of Naval Architects of Korea
• /
• v.33 no.1
• /
• pp.189-205
• /
• 1996

The first - stage study of the three - stage SWATH ship development program of Hyundai Maritime Research Institute has been completed. Various computer programs have been prepared in advance to calculate and predict various properties and characteristics of SWATH ships. With these design tools, theoretical analyses for the systematic variation of design parameters were performed, and step - by - step model tests were carried out to derive the final configuration.

• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.3
• /
• pp.102-116
• /
• 1992

This report is to provide a comparison of the hydrodynamic characteristics of a single strut SWATH(Small Waterplane Area Twin Hull) model and a tandem(twin) strut SWATH model. The hydrodynamic characteristics included are the resistance in calm water, 6 degree freedom of motion responses in stationary and with forward speeds, and wave loadings etc. All these quantities are measured in the towing tank and compared with the computational results. Based on the present study, the pros and cons for single and tandem strut SWATH designs are clarified and some design suggestions are made.

• Journal of the Society of Naval Architects of Korea
• /
• v.34 no.2
• /
• pp.27-38
• /
• 1997

This paper is concerned with the calculation of the wave resistance for SWATH ships based on a low order Rankine source panel method. Two types of free surface boundary conditions, Dawson type (double model approximation) and Kelvin type (free stream approximation) are used. For the free surface boundary calculation, an analytic differentiation is employed instead of implementing a finite difference scheme. Then, the radiation condition is satisfied by, so called, the panel shift method. The numerical results using the above two methods are compared with those using the thin ship/modified slender body approximation and also with the experimental results. The SWATH models considered are a single strut SWATH and a twin strut SWATH together with the variations of two demihull separation distance. In order to prove the validity of the program developed, the numerical calculations for a Wigley mono hull and Wigley twin hulls are compared with the available experimental results.

• Journal of Ocean Engineering and Technology
• /
• v.6 no.2
• /
• pp.103-112
• /
• 1992

The calculation method which takes into account the shear lag effects on the ultimate transverse bending moment of a SWATH(Small Waterplane Area Twin Hull) ship has been developed. In case of the ultimate bending strength analysis of conventional monohull ships and general box girder structures, the hypothesis that plane section remains plane after bending can be employed but not in the case of the structures having wide flange. For the ultimate bending strength analysis of such structures, a new method which can take into account the effect of shear lag on the ultimate bending strength has been developed by adopting more reasonable assumption that warping distortion of the section takes place inthe same way as the actual stress distribution. Finally, the proposed method has been applied to a a SWATH cross deck structure.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.1 no.1
• /
• pp.95-106
• /
• 1995

The small-waterplane-area-twin-hull(SWATH) ship has been recognized as a promising high performance ship because of her superior seakeeping characteristics and large deck area for various operations compared to the conventional monohull ship. significant advances in analytical technics for the prediction of the ship motions, wave loads and structural responses, structural fatigue and its prediction, and hull vibration for ship motions, wave loads and structural responses, structural fatigue and its prediction, and hull vibration for SWATH ship have been much developed during the last twenty years. Based on these developments in technology an integrated computational procedures for prediction wave loads and structural responses can be used to get a accurate results. But the major problem of SWATH ship's structural design is the accurate prediction of structural responses by the maximum critical loads likely to be experienced during the life of SWATH. To get a easier and safer computational procedures and the analytical approach for determining the accurate structural responses, a case study has been presented through the project experienced.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.23 no.4
• /
• pp.35-43
• /
• 1986

Recently, the SWATH concept hull form which is capable of high speed navigation with small oscillatory motions in waves, was developed from the catamaran type hull forms. This paper discribes a method to predict motion responses of a SWATH ship in regular waves using the strip theory. The 2-dimensional hydrodynamic problem was solved using the improved Green integral equation which is free from the irregular frequencies. The effects of viscous drag which is dominant in heave damping of the SWATH ship are taken into account. Further, the effects of the stationary stabilizing fins which is important in high speed performance of the SWATH ship are included in the equation of motions. It seems that the motion responses calculated by the present method show better agreement with experimental results than other existing numerical results.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.3
• /
• pp.933-937
• /
• 2014

A derivative of Mycobacterium bovis Bacillus Calmette-Guerin (BCG) has been used for the preparation of tuberculosis vaccines. To establish a Korean tuberculosis vaccine derived from BCG-Pasteur $1173P_2$, genome sequencing of a BCG-Korea strain was completed by Joung and coworkers. A comparison analysis of the genome sequences of the BCG-Pasteur $1173P_2$ and BCG-Korea strains showed marginal increases in the total genome length (~0.05%) and the number of genes (~4%) in the BCG-Korea genome. However, how the genomic changes affect the BCG-Korea protein expression levels remains unknown. Here, we provide evidence of the proteomic alterations in the BCG-Korea strain by using a SWATH-based mass spectrometric approach (Sequential Window Acquisition of all THeoretical mass spectra). Twenty BCG proteins were selected by top-rank identification in the BCG proteome analysis and the proteins were quantified by the SWATH method. Thirteen of 20 proteins showing significant changes were enough to discriminate between the two BCG proteomes. The SWATH method is very straightforward and provides a promising approach owing to its strong reliability and reproducibility during the proteomic analysis.

• 한국기계연구소 소보
• /
• s.17
• /
• pp.145-156
• /
• 1987

A PSWATH is a computer program for the determination of principal particulars of Small Waterplane Area Twin Hull (SWATH) Ship design at the preliminary design stage. This paper describes the PSWATH system and the underlying theory. The major calculation modules are hull definition, resistance and propulsion, weight estimation and pitch stability analysis. Use of the model is illustrated by input, output and means of examples.

• Journal of the Korean Institute of Navigation
• /
• v.12 no.3
• /
• pp.39-53
• /
• 1988

반 잠수식 저 수선면적 쌍동선(Small WAterplane Area Twin Hull) 의 총 저항 추정을 위한 새로운 전산 program 개발에 대해서 개략적으로 설명하였다. SWATH ship의 총저항을 조파 저항, 표면 마찰 저항, Fin 저항 및 부가 저항의 합으로 계산하였다. 개발된 program의 정확성을 확인하기 위해서 수치 해석결과를 세 가지 SWATH 모델들의 실험치와 비교하였다.