• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.6
• /
• pp.39-44
• /
• 2005

Due to mismatch of thermal expansion coefficients between aluminum sheet and glass/epoxy sheet, thermal residual stresses generally appear in the FML. These stresses will affect the yield and fatigue strength of the FML. The numerically determined residual stresses in the Fiber-Metal-Laminates(FML) have been compared to the residual stresses measured from the curvature and tensile test methods. These two experimental methods have been developed for assessing the influence of residual stress in FML. Post-stretching process has been applied to remove the thermal residual stress and reverse the stress distribution. After post-stretching process, the residual stress has been measured from experiments. The results obtained show that analytical and experimental data are well agreed. The thermal residual stress can be removed by post-stretching process and it will increase the yield strength of FML.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.2 no.1
• /
• pp.56-61
• /
• 2003

This is a review article about range of motion, stretching, and aerobic exercise in accelerated rehabilitation of knee and shoulder. If the joint was immobilized for a long time after injury, it would cause stiffness and atrophy. Therefore, this program includes various exercise techniques; range of motion for joint stiffness, and stretching for muscle relaxation, and cardiovascular training (e.g., swimming, upper body extremity, stationary bicycle) for prevention of cardiopulmonary function decrease. In accelerated rehabilitation, It is very important factor to make interaction between clinical exercise specialist and patients. Also, we recommend that they should discuss with sports medicine doctor as a team members the following; pain, adaptation of exercise, fitness level, and progression of program.

• Journal of the Korean Chemical Society
• /
• v.42 no.6
• /
• pp.629-637
• /
• 1998

The HF-SCF, MP2 and B3LYP calculations have been performed on the two conceivable clusters $(HF)_2(CO)$ trimers as well as their dimer complexes FH…FH, FH…CO and FH…OC applying $6-31+G^{\ast}^{\ast}$, and $6-311+G^{\ast}^{\ast}$ basis sets. A variety of ground state properties of these trimer complexes have been listed, and compared with corresponding properties of isolated monomers and combined dimers. It was calculated that FH…CO is more stable than FH…OC by average 0.85 kcal/mol and F-H…F-H…C≡O is more stable than F-H…F-H…O≡C by 1-2 kcal/mol. The C≡O stretching bands of the F-H…F-H…C≡O and F-H…F-H…O≡C were red shifted by 24, $37\;cm^{-1}$ compared with the FH…CO and FH…OC respectively. Also, H-F stretching bands were red shifted by 54 and $353\;cm^{-1}$.

• Physical Therapy Korea
• /
• v.23 no.4
• /
• pp.1-8
• /
• 2016

Background: Various methods are used for recovery of knee flexion range of motion (ROM) due to a tightened rectus femoris muscle (RFM) or limited inferior glide of the patella. Stretching methods are common interventions for restoring the tightened RFM length. Also patellar inferior gliding (PIG) technique can recover tightened RFM length too. However, effect of applying the PIG to passive knee flexion (PKF) has not been studied. Objects: The purpose of this study was to investigate the effect of combining PIG with RFM stretching for improving knee flexion ROM in subjects with RFM tightness. Methods: Twenty-six subjects with RFM tightness were recruited. Two different methods of knee stretching were tested: 1) PKF during modified Thomas test (MTT) and 2) PKF with PIG during MTT. The passive stretching forces was controlled by hand-held dynamometer. The knee flexion ROM angle was measured by a MTT with ImageJ software. Differences between the conditions with and without PIG were identified with a paired t-test. Results: The knee flexion ROM was significantly greater for PKF with PIG ($114.44{\pm}9.33$) than for PKF alone ($108.97{\pm}9.42$) (p<.001). Conclusion: A combination of passive knee flexion exercise and PIG can be more effective than PKF in increasing knee flexion ROM in individuals with RFM tightness.

• The Journal of Korean Physical Therapy
• /
• v.21 no.4
• /
• pp.1-7
• /
• 2009

Purpose: Cervical pain is caused mainly by a static position, lasting work, bad habits and stress, and is accompanied by pain in the upper trapezius. Traditionally, heat and traction, exercise, mobilization, manipulation have been used to treat cervical pain. This study examined the effect of stretching and manipulation (high-velocity low-amplitude: HVLA) on the pain and ROM in women with chronic cervical and upper shoulder pain. Methods: Fifty-two women diagnosed with chronic cervical and upper shoulder pain were enrolled in this study. Among them, 26 patients (experiment group) were managed by passive stretching and manipulation, and another 26 patients (control group) were treated with physical therapy intervention (hat pack: HP, transcutaneous electrical nerve stimulation: TENS, ultra sound: US). Each group made use of a Visual Analogue Scale (VAS) and the highly reliable (flextion: 0.92, extention: 0.99) cervical range of motion (CROM) to compare the possible changes in pain and ROM in the two groups after treatment. Results: In the experimental group, the pain decreased and the ROM has increased in all directions. In the control group, the pain decreased but the ROM was not changed in all directions. Conclusion: According to the results, passive stretching and manipulation is effective for increasing the ROM and decreasing the level of pain. Moreover, physical therapy intervention (HP, TENS, US) is effective for immediately decreasing the pain but has little effect on the ROM.

• Composites Research
• /
• v.26 no.2
• /
• pp.123-128
• /
• 2013

The PVDF (polyvinylidene fluoride) fibers were prepared using the wet spinning processing. To improve ${\beta}$-phase crystalline which closely related piezoelectric property PVDF wet spun fibers conducted post treatment. Post treatment is consisted of heat stretching and annealing process. The heat stretching and annealing conditions were controlled by changing temperature between glass transition temperature and melting temperature. From these experimental data, the resulting crystal structure of the ${\beta}$-phase crystalline was confirmed by FT-IR and XRD experiments. From these analysis results, optimum stretching and annealing conditions of the wet spun PVDF fibers were founded to increase high ${\beta}$-phase crystalline. Furthermore results showed that thermal processing had a direct effect on modifying the crystalline microstructure and also confirmed that heat stretching and annealing could increase the degree of crystallinity and ${\beta}$-phase crystalline. Finally, piezoelectric constant ($d_{11}$) of the post heat treated PVDF fibers reinforced composite were measured to investigate the feasibility for the sensing materials.

• Physical Therapy Korea
• /
• v.22 no.4
• /
• pp.8-16
• /
• 2015

The purpose of this study was to evaluate the effects of mobilization of the sciatic nerve on hamstring flexibility, lower limb strength, and gait performance in patients with chronic stroke. This study was a randomized clinical trial with a crossover design. Sixteen subjects were recruited for this study. The subjects were randomly divided into two intervention groups and underwent either of the following two interventions: sciatic nerve mobilization or static stretching of the hamstring. We assessed hamstring flexibility, lower limb strength, and gait performance using a digital inclinometer, a hand-held dynamometer, and the 10-meter walk test, respectively. Subjects had a 24-hour rest period between each session in order to minimize carryover effects. Measurements for each test were assessed prior to and immediately after the intervention sessions. Using a two-way analysis of variance test with repeated measures, data from the two trials were analyzed by comparing the differences between both techniques. The level of statistical significance was set at .05. Sciatic nerve mobilization resulted in significantly better knee extensor strength (p=.023, from $15.32{\pm}5.98$ to $18.16{\pm}6.95kg$) and knee flexor strength (p=.011, from $7.80{\pm}4.80$ to $8.15{\pm}4.24kg$) in the experimental group than in the control group. However, no significant effects of static stretching of the hamstring were observed on hamstring flexibility from the ankle plantar flexion (p=.966) and ankle neutral positions (p=.210) and on gait performance (p=.396). This study indicated that the sciatic nerve mobilization technique may be more effective in muscle activation of the knee extensor muscle and knee flexor muscle than hamstring static stretching technique in patients with chronic stroke.

• Journal of Digital Convergence
• /
• v.13 no.9
• /
• pp.333-339
• /
• 2015

The purpose of this study was to examine the effects of trunk mobilization and stretching activities on respiratory function, trunk posture, and physical fatigue for elderlies with restrictive lung diseases and related respiratory impairment. The present study was conducted with ten subjects, participating for eight weeks between January and November 2014. Subjects performed trunk mobilization and stretching routines for 30 minutes per day for three days each week. The study results showed that there were significant improvements in FVC and FEV1, trunk posture, trunk movement and physical fatigue(p<.05). The study results verified that trunk mobilization and stretching activities can be used as respiratory orthopedic manual therapy to improve respiratory function, trunk posture, trunk movement and physical fatigue simultaneously for elderly with respiratory impairment. Continuous studies through therapeutic convergence with the exercise field along with the respiratory orthopedic manual therapy that used in this study for elderly people with restrictive lung diseases will be necessary for the future.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.7
• /
• pp.629-636
• /
• 2009

Mechanical stimulation is known to play a vital role on the differentiation of mesenchymal stem cells (MSCs) to pre-osteoblasts. In this research, we developed a tensile cell stimulator, composed of a DC motor-driven actuator and LVDT sensor for measuring linear displacement, to study the effects of tensile stress on osteogenic differentiation of MSCs. First, we demonstrated the reliability of this device by showing the uniform strain field in the silicon substrate. Secondly, we investigated the effects of tensile stretching on osteogenic differentiation. We imposed a pre-set cyclic strain at a fixed frequency on cell monolayer cultured on a flexible silicon substrate while varying its amplitude and duration. 60 min of resting period was allowed between 30 min of cyclic stretching and this cycle is repeated up to 7 days. Under the combined stimulation with osteogenic media and mechanical stretching, the osteogenic markers such as alkaline phosphatase (ALP), osterix, and osteopontin began to get expressed as early as 4 days of stimulation, which is much shorter than what is typically required for osteogenic media induced differentiation. Moreover, different markers were induced at different magnitudes of the applied strains. Lastly, for the case of ALP, we observed the antagonistic effects of osteogenic media when combined with mechanical stretching.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.2
• /
• pp.660-665
• /
• 2014

Optimization of process parameters in polymer extrusion is an important task to reduce manufacturing cost. To determine the optimum values of the process parameters, it is essential to find their influence on the elongation of polymer breathable thin film. The significance of six important process parameters namely, extruder cylinder temperature, extruder speed, extruder dies temperature, cooling roll temperature, stretching ratio, stretching roll temperature on breathable film elongation of polymer extrusion was determined. Moreover, this paper presents the application of Taguchi method and analysis of variance(ANOVA) for maximization of the breathable film elongation influenced by extrusion parameters. The optimum parameter combination of extrusion process was obtained by using the analysis of signal-to-noise ratio. The conclusion revealed that stretching ratio were the most influential factor on the film elongation. The best results of film elongation were obtained at lower stretching ratio.