• Speech Sciences
• /
• v.12 no.3
• /
• pp.165-173
• /
• 2005

This paper investigates the influence of the Korean phonology on the production of English words including a stop plus nasal sequence through production experiments with a beginner and an advanced group of Korean English learners. The results of the production experiments show that both the beginner and the advanced group of Korean English learners were under the influence of the Korean phonological rule realizing a stop as a nasal before a nasal when they pronounced a stop plus nasal sequences in English words. The extent of L1 interference was greater in the beginner group than in the advanced group.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2005.05a
• /
• pp.52-58
• /
• 2005

In this paper, we address a real-world periodic vehicle routing problem with time windows (PVRPTW). In addition to the general requirements of single-day vehicle routing problem, each stop has required number of visits within a cycle period in PVRPTW. Thus, we need to determine optimized days of visit for each stop with consideration of the cycle-period days together. The problem also requires consistent vehicle assignment to the stops. We developed a clustering based 3-phase approach for this problem: 1) stop-route assignment, 2) stop-day assignment, and 3) stop sequencing within a single-day route. Using the approach, we could reduce the number of routes and improve the routing efficiency for several real-world problems.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.4
• /
• pp.269-282
• /
• 2009

This paper presents a novel approach for Lamb wave based structural health monitoring(SHM) in honeycomb aluminum panels. In this study, a suite of three signal processing algorithms are employed to improve the damage detection capability. The signal processing algorithms used include wavelet attenuation, correlation coefficients of power density spectra, and triangulation of reflected waves. Piezoelectric transducers are utilized as both sensors and actuators for Lamb wave propagation. These SHM algorithms are built into a MatLab interface that integrates and automates the hardware and software operations and displays the results for each algorithm to the analyst for side by side comparison. The effectiveness of each of these signal processing algorithms for SHM in honeycomb aluminum panels under a variety of damage conditions is then demonstrated.

• Journal of Korean Society of Transportation
• /
• v.6 no.2
• /
• pp.49-56
• /
• 1988

Alternate use of lane at a signalized intersection is a quite different control of the operation of an intersection. This control introduces a new stop line and signal before the original stop line. All of the lanes between the two stop lines are used for left turn traffic or through traffic at a time. The purpose of the control is increasing the capacity of a n intersection without widening the approach width. this paper contains a study on the condition of a application, the proper distances between the two stop lines, the reasonable offsets(rear) to guarantee clearing the vehicles of previous phase, the comparison of approach capacity between the existing control and this control. The study results reveals that the offsets(rear) are rather stable showing the range(maximum value minus minimum value) of it's value does not exceed 3.6 seconds according to the field data. The approach capacity will be increased by 27%, 43%, 59%, 84% when the distances between the stop lines are 30.0m respectively. The control might have theoretical limitation to operate in practice. So an experimental application of the control at some suitable intersections prior to expanding it.

• Electronics and Telecommunications Trends
• /
• v.24 no.5
• /
• pp.52-61
• /
• 2009

교토 의정서에 의한 지구 온난화의 규제 및 방지를 위하여 자동차에 환경 관련 규제가 강화되고 있으나 재생에너지가 전체 에너지에서 차지하는 부분은 2020년에 약 1%(현재는 약 0.4%) 정도로 예측되어 대체에너지 개발 이전에 에너지 저감 기술에 대한 필요성이 대두되어 차량의 공회전 상태시 엔진 구동을 정지시키는 Stop-Start 시스템에 대한 연구가 자동차 제조사 중심으로 연구되어 왔으며 불필요한 공회전으로 소모되는 연료 손실 중 $5{\sim}8%$ 이상 회수 가능함이 입증되고 있다. 본 고에서는 Stop-Start 시스템 기술에 대하여 소개하고, 국/내외 시장동향을 분석하여 그 필요성에 대하여 고찰하며, 한국전자통신연구원에서 개발중인 IT 융합 Stop-Start 시스템 개발 현황에 대하여 기술한 후 결론을 맺는다.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.14 no.1
• /
• pp.16-21
• /
• 2018

This work aims to develop a platform to investigate the effect of operation schedules on the building energy consumption and to derive a simulation model based optimal start and stop daily strategy. An open-source building energy simulation tool DOE2 is used for the engine, and the developed simulation model is validated using ASHRAE guideline 14. The effect of late-start/early-stop operation of HVAC system on the daily building energy consumption was analyzed using the developed simulation model. It was found that about 10% of energy consumption cut was possible using the control strategy for an hour of advance of the stop operation, and about 3% per an hour of delay of the start operation.

• Proceedings of the KSR Conference
• /
• 2005.05a
• /
• pp.550-555
• /
• 2005

In this research, safety requirements for guard rail, buffer stop, car stop scotch block, protection device, fire protection facilities, safety siding, escape facilities and inundation protection facilities are studied to establish a standard. First, various kinds of guard rails and their construction methods are investigated. Researches on the level difference of main track and guard rail, joint, length, and fastening force of guard rail are done. Second, the classification of buffer stop and car stop scotch block and its characteristics are examined, and the impact force, speed limit and capacity of buffer stop are summarized. Details of protection device, fire protection facilities, safety siding, escape facilities and inundation protection facilities are also investigated. From this fundamental research results, basic data on the safety facilities of railroad system are established.

• International journal of advanced smart convergence
• /
• v.5 no.2
• /
• pp.66-72
• /
• 2016

With the growing shift from traditional educational approaches and studying to the more digital classroom, using electronic textbooks and digital native's demand, there is a growing need to develop new methods for learn Kanji characters for children. The purpose of this study is to help children learn the basic Kanji by using stop motion and block methods, and approaching the basic Kanji character education with a more innovative and interactive smart phone APP. In the development of this smart phone App for children's Kanji character education proposed in this study, 100 basic Kanji characters for children are selected. These 100 characters are required for the stop motion animation production, where each selected Kanji is created as a stop-motion animation utilizing a variety of techniques, such as storytelling, to better engage children. The intelligent App is designed with image recognition technology, so that in the learning process children take a picture for the assembled block using their smart phone, the APP then recognizes whether it is assembled correctly, and then plays an animation corresponding to the assembled Kanji character.

• Proceedings of the KSME Conference
• /
• 2000.11a
• /
• pp.641-646
• /
• 2000

This paper addresses a throttle/brake control law for stop and go cruise control systems which make the vehicle remain at a safe distance from a preceding vehicle according to the driver's preference, automatically slow down and come to a full stop behind a preceding vehicle. The uncertainties of vehicle model have been considered in the design of the control law. The effect of throttle/brake control has been investigated via simulations. The simulations were performed using a complete nonlinear vehicle model. The results indicate that the proposed throttle/brake control law can provide the stop and go cruise control system with a good distance tracking performance.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.7 no.1
• /
• pp.1-8
• /
• 1970

The band-stop filters which resonate at intervals of one-quarters, and three-quarters guide-wave length are designed and its frequency characteristics are measured. 2K25 klystrons (at 8000MC) were used as microwaves source. This bandstop filters were designed from low pass prototype and the Impedance of Impedance of these filters was made to be equal to one of the low pass prototype. It is demonstrated that the filters considered here, have narrow stop bandwidths and sharp characteristics in the stop band.