• Bulletin of the Korean Chemical Society
• /
• 제22권3호
• /
• pp.267-270
• /
• 2001

The adsorption of chlorine on a Pt(111) surface at 90 K has been studied using scanning tunneling microscopy (STM) in ultra-high vacuum environments. The adsorbed chlorine atoms give rise to two different ordered structures, (3${\times}$3)-Cl and c(4${\times}$2)- Cl, depending on the coverage. It has been determined from the STM image that the absolute coverage of (3${\times}$3)-Cl structure is 0.44, which is not in agreement with coverage calibrated by a low energy electron diffraction technique together with an Auger electron spectrometer and a thermal desorption spectrometer. The Cl atoms bound to on-top sites at the Pt(111)(3${\times}$3)-Cl surface appeared to effectively perturb the density of states of Pt atoms, as compared with that bound to bridging sites. The other ordered structure, c(4${\times}$2)-Cl, with small domain sizes, consists of both on-top and bridge-bonded species with a saturation coverage of 0.5.

• Structural Engineering and Mechanics
• /
• 제77권2호
• /
• pp.273-291
• /
• 2021

The strut-and-tie method (STM) has been widely accepted and used as a rational approach for the design of disturbed regions ('D' regions) of reinforced concrete members such as in corbels and deep beams, where traditional flexure theory does not apply. This paper evaluates the applicability of the equilibrium based STM in strength predictions of deep beams (with rectangular and circular cross-section) and corbels using the available experiments in literature. STM is found to give fairly good results for corbel and deep beams. The failure modes of these deep members are also studied, and an optimum amount of distribution reinforcement is suggested to eliminate the premature diagonal splitting failure. A comparison with existing empirical and semi empirical methods also show that STM gives more reliable results. The nonlinear finite element analysis (NLFEA) of 50 deep beams and 20 corbels could capture the complete behaviour of deep members including crack pattern, failure load and failure load accurately.

• 복합신소재구조학회지
• /
• 제6권4호
• /
• pp.19-28
• /
• 2015

• 대한물리의학회지
• /
• 제4권3호
• /
• pp.149-156
• /
• 2009

Purpose：The hamstring muscle has an important role in standing, walking and other functions related to daily living. Most people with Cerebral Palsy(CP) have muscle tightness, especially in the hamstring, which may cause abnormal alignment in the lower extremities. To investigate an effective treatment for hamstring muscle tightness by observing the effects of heat pack or Soft tissue mobilization(STM) on hamstring muscles. Methods：Thirteen-two volunteers with CP aged between 9 and 13 years($M\pmSD$: $11\pm1.46$), were recruited and divided into four groups of four: (1) the STM for people with Spastic CP group, (2) the heat pack(HP) for people with Spastic CP group, (3) the STM for people with Mixd CP group, and (4) the heat pack for people with Mixed CP group. All received treatment three times per week for six weeks. A inclinometer was used to measure for hip flexion & knee extension joint range motion(ROM). Results：The ROM of hip flexion & knee extension were improved at the STM and HP for people with Spastic CP groups. The ROM and hip flexion were improved at the STM and HP for people with Mixed CP groups. The amount of increase ROM are differenced by the types of CP. Conculusion：STM and heat pack, both are effective for people with CP especially for Spastic CP.

• 한국차세대컴퓨팅학회논문지
• /
• 제13권2호
• /
• pp.49-61
• /
• 2017

트랜잭셔널 메모리는 트랜잭션 처리를 위한 병렬 프로그래밍 패러다임을 크게 바꾸었으며, 하드웨어 및 소프트웨어 방식에 따라 STM, HTM, HyTM으로 구분된다. 그러나, 기존 연구들은 모든 워크로드에 대해 획일적인 재시도 정책을 제공하는 문제점이 존재한다. 이러한 문제점을 해결하기 위해, 본 논문에서는 멀티코어 환경에서 샘플링 기반 유연한 재시도 정책을 이용한 하이브리드 트랜잭셔널 메모리 기법을 제안한다. 첫째, 제안하는 기법은 트랜잭션의 특성을 파악하여 HTM 혹은 STM을 선택하여 수행하거나, 블룸필터를 이용하여 동시에 HTM과 STM을 수행한다. 둘째, 제안하는 기법은 각 워크로드 내의 트랜잭션의 특성을 반영한 유연한 HTM 재시도 정책을 제공한다. 마지막으로 STAMP를 이용한 성능평가를 통해, 제안하는 기법이 기존 연구에 비해 10~20%의 성능 향상이 있음을 보인다.

• 정보처리학회논문지B
• /
• 제11B권5호
• /
• pp.603-610
• /
• 2004

분산검색시스템은 중재자 또는 메타검색엔진에 의한 중앙통제로 인하여 중앙 시스템에 트래픽이 집중된다. 또한 중앙통제를 위한 복잡한 알고리즘의 설계와 별도의 하드웨어 설치 등의 비용 증가 문제가 발생한다. 따라서 이러한 문제를 해결하기 위해 여러 검색시스템이 서로 독립적인 검색기능을 가지면서도 중앙의 통제를 받지 않으면서 상호 협조할 수 있는 방식이 필요하다. 본 논문에서는 분산검색시스템과 관련된 여러 연구를 살펴보고 다중의 정보검색시스템이 중앙의 통제를 받지 않는 순차적 전달방식(STM)을 이용한 분산정보검색시스템의 Framework를 설계하며 이와 관련된 알고리즘을 구현한다 이를 위해 먼저 웹을 논리적으로 분할하여 관리하는 웹 분할 정책을 제시하며, 검색시스템의 수에 따른 순차적인 질의 처리방식을 각각 예제를 통해 설명한다. Framework에 적합한 정보검색시스템의 3 Layer구조와 각 Layer별 기능과 모듈을 또한 제시한다. 마지막으로, STM 알고리즘의 효율적 구현을 위하여 모듈 구조를 분석하고 이의 pseudocode 표현을 제시하며 서버간 순차적 질의 전달 시연과정을 통해 제안한 SIM 알고리즘이 효율적으로 동작함을 보여준다.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2005년도 High Temperature Superconductivity Vol.XV
• /
• pp.16-16
• /
• 2005

• 한국광학회:학술대회논문집
• /
• 한국광학회 1997년도 Advance Program of 14th optics andquantum Electronics conference, 1997제14 회 광학 및 양자전자 학술 발표회 논문 요약집
• /
• pp.101.2-103
• /
• 1997

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 C
• /
• pp.1715-1717
• /
• 2004

We attempt to investigate morphology of self-assembled dipyridinium dithioacetate on Au(111) substrate by Scanning Tunneling Microscopy(STM). Also, we measured electrical properties using Scanning Tunneling Spectroscopy(STS). Sample that use this experiment acquires thiol function beside quantity by dipyridinium dithioacetate, is structure that can be self-assembled easily to Au(111) substrate. The same self-assembly procedure was used for two different concentrations, 0.5mmol/ml and 1mmol/ml. Dilute density of sample by 0.5mmol/ml, 1mmol/ml and observed dipyridinium dithioacetate's image by STM after self-assembled on Au(111) substrate. The structure of Tip/SAMs/Au(111) has been used measurement for electrical properties(i-v) using STM. The current-voltage measurement result, observed negative differential resistance(NDR) properties.

• Bulletin of the Korean Chemical Society
• /
• 제23권1호
• /
• pp.71-74
• /
• 2002

The apparent barrier height for charge transfer through an interfacial water layer between a Pt/Ir tip and a gold surface has been measured using STM technique. The average thickness of the interfacial water layer inside an STM junction was controlled by the amount of moisture. A thin water layer on the surface was formed when relative humidity was in the range of 10 to 80%. In such a case, electron tunneling through the thin water layer became the majority of charge transfers. The value of the barrier height for the electron tunneling was determined to be 0.95 eV from the current vs. distance curve, which was independent of the tip-sample distance. On the other hand, the apparent barrier height for charge transfer showed a dependence on tip-sample distance in the bias range of 0.1-0.5 V at a relative humidity of approximately 96%. The non-exponentiality for current decay under these conditions has been explained in terms of electron tunneling and electrochemical processes. In addition, the plateau current was observed at a large tip-sample distance, which was caused by electrochemical processes and was dependent on the applied voltage.