• Proceedings of the Korea Multimedia Society Conference
• /
• 2001.06a
• /
• pp.3-7
• /
• 2001

본 연구에서는 다종재료를 가공할 수 있는 RP(Rapid Prototyping)인 CAFL$^{VM}$의 구현을 위해 반드시 필요한 단면정보 추출기에 대하여 연구하였다. STL 3D 모형에서 단면정보를 추출하기 위해서, 패싯(facet)과 슬라이싱(slicing) 평면이 가질 수 있는 모든 경우를 고려한 알고리즘을 개발하였다. STL 파일의 구조적인 문제점 때문에 모호성과 처리량 증가 문제가 발생하지만, 본 연구에서는 창조 버퍼를 사용하여 이러한 문제점들을 효과적으로 해결하였으며, 이를 많은 STL 3D 샘플로 검증하였다.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.12 s.177
• /
• pp.205-210
• /
• 2005

This paper addresses the correlation between the change of file size and the scanning path build time by the slicing height of STL file. Though the study about STL file has been achieved quite actively scanning path build time using STL file is not investigated so much to be satisfied. The file size depends on the number of polygon created by the slicing height specified. And this number of polygons increases in a regular rate. The correlation between the number of polygons and the scanning path build time is examined and verified.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2001.06a
• /
• pp.307-311
• /
• 2001

신속조형시스템(RP : Rapid Prototyping)용 자료교환 표준인 STL의 자료구조는 단순하고, 조형용 2차원 단면 자료로의 전환이 용이하며, 생산 가공 기술로서의 현대적인 특성(신속성, 조형성, 경제성, 청정성 등)을 가지고 이는 장점이 있는 반면에, STL 3D 좌표값의 기준(좌표계의 원점)이 되는 크기 정보가 없다. 이런 문제를 구현된 STL 뷰어에서는, 스케일링(scaling) 기법과 선형적인 이동 기법을 사용하여 해결하였고, CAD 시스템으로 제작된 파일 자체의 문제점 패싯(facet) 중복, 정밀도, 법선 벡터 값의 오류 등도 검증기(verifier)와 오류 정정기(error corrector)글 구현하여 해결하였다. 제안된 방법으로 구현된 STL 뷰어는 시스템의 안정성과 확장성, 그리고 효율성 측면에서 우수한 성능을 보였으며, 슬라이싱(slicing), 경로 추적기(path tracer)의 전처리기의 역할을 한다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.3 s.174
• /
• pp.769-776
• /
• 2000

RP(Rapid Prototyping) technology is gaining its popularity in building a prototype in all industries. SLS(Slective Laser Sintering) is one of RP technologies, which is focused on tooling processes as well as three dimension solid model. There are several factors, the length and the cross-sectional area of a part, that have an effect on build setup in SLS process. In this paper, the computation on geometrical relationship is used to slice STL file and to estimate these factors. Based on these values, the build setup parameters such as the heating temperature, the laser power, and the powder cartridge feed rate are determined by neural network approaches. The test results show that the computation time is saved and the neural network approach is able to apply to get the optimal parameters of build process within an acceptable error rate.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.898-902
• /
• 1995

STEP is a neutral model for exchanging CAD modelbetween different CAD systms. The paper presents a laser path contour generation for rapid prototyping originated form STEP format files without using any tools nor libraries for STEP data manipulation. Polygons are generated from every point on the layer of given thickness, which are the intersections of layer plane and edges stored in entity tables. Curves are approximated with polygons whitin segment tolerance limit in order to cover sculptured surfaces. With the advantage of less data loss in direct slicing over STL formats, the system developed in this work shows a good potential to provide data share with various CAD systems including RP data preparation.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.3
• /
• pp.1-8
• /
• 2017

Tool path generation is a part of process planning in 3D printing. This is done before actual printing by a computer rather than an AM machine. The mesh geometry of the 3D model is sliced layer-by-layer along the Z-axis and tool paths are generated from the sliced layers. Each 2-dimensional layer can have two types of printing paths: (i) shell and (ii) infill. Shell paths are made of offset loops. During shell generation, twists can be produced in offset loops which will cause twisted tool paths. As a twisted tool path cannot be printed, it is necessary to remove these twists during process planning. In this research, An algorithm is presented to remove twists from the offset loops. To do so the path segments are traversed to identify twisted points. Outer offset loops are represented in the counter-clockwise segment order and clockwise rotation for the inner offset loop to decide which twisted loop should be removed. After testing practical 3D models, the proposed algorithm is verified to use in tool path generation for 3D printing.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.10
• /
• pp.94-105
• /
• 2020

Recently, most studies of 3D printing in construction have focused on the development of 3D printers and materials suitable for construction 3D printers. In comparison, there has been little research on design support tools that enable representative BIM data of building modeling tools to be applied to 3D printing. In addition, existing 3D printing slicing programs are commercialized around manufacturing, showing that they are unsuitable for construction 3D printing. Therefore, this research aims to develop a design support tool for 3D printing for buildings. The developed design support tool was validated based on arbitrary BIM data. Verification showed that wall pattern generation was modeled accurately without errors, and a calculation of the construction period showed that the formula presented in this study was valid. Furthermore, the maximum length of the mesh split was set to 100mm to minimize errors when converting to STL files.

• Journal of the Korean Society of Radiology
• /
• v.10 no.6
• /
• pp.403-409
• /
• 2016

MRI scan is a useful method in the diagnosis of musculoskeletal excellent contrast of the organization. Depending on the patient's musculoskeletal examinations state the type of aids provided the aid is used there is also challenging as well as the costs do not vary. This study was produced by the use of 3D printing technology, an MRI aids. Aids in the production process, then through 3D modeling and then convert stl files using (3D MAX.2014, Fusion360) slicing programs (Cubicreater 2.1ver., Cura 15.4ver) converted to G-code printed on the FDM scheme (Cubicon Style, output was MICRO MAKE). Output is, but in the FDM to evaluate the SNR on the MRI images were compared to the test is the case before use, and then to produce a Water Phantom case of a PLA, ABS, a TPU thickness 3mm, using aids before, It was evaluated in a clinical image after qualitatively. Obtaining an image of SNR Warter Phantom appeared to have been evaluated as T1 NON $123.778{\pm}28.492$, PLA $123.522{\pm}28.373$, ABS $124.461{\pm}25.716$, TPU $124.843{\pm}27.272$. T2 NON $127.421{\pm}26.949$, was rated as PLA $124.501{\pm}27.768$, ABS $128.663{\pm}26.549$, TPU $130.171{\pm}25.998$. The results did not show statistically significant differences. The use of assistive devices before and after images Clinical evaluation method palliative $3.20{\pm}0.88$, $3.95{\pm}0.76$ after using the aids used to aid improved the quality of the image. Production of the auxiliary mechanism using a future 3D printing is expected are thought to be used clinically, it can be an aid making safe and comfortable than the inspection of the patient is an alternative to improve the problems of the aids used in the conventional do.