• Nuclear Engineering and Technology
• /
• v.53 no.7
• /
• pp.2323-2333
• /
• 2021

The paper proposes a technique for reconstructing the true hardening curve of isotropic materials from ring tensile tests. Neutron irradiated 42XNM alloy tensile properties were investigated. The calculation of the true hardening curve for tensile and compression tests of standard cylindrical samples was performed at the first step. After that, the FEM-model was developed and validated using the ring tension and compression tests (with the hardening curve defined in step 1). Finally, the true hardening curve was calculated by selecting the FEM-model parameters and its validation by ring sample tests in different states using an iterative method. For these samples, experimental and calculated gauge length values were obtained, and the corresponding material's constants were estimated.

• The Journal of Korean Physical Therapy
• /
• v.34 no.4
• /
• pp.181-186
• /
• 2022

Purpose: This study was to applied to stretching plantar flexor and invertor at the same time to observe the effect of balance and walking ability. Methods: Subjects were instructed patients with ankle limited of motion, 6 months after stroke. We classified 20 subjects into two groups (experimental group: stretching plantar flexor and invertor at the same time, control group: only stretching plantar flexor). each group included 10 subjects and applied ankle stretcher for 20 minutes, 5 times/week during 4 weeks (total 20 times). Results: Both experimental group and control group showed significant increases in static balance, however, the significantly increases in step length and gait speed was observed only in the experimental group. There was no significant increases in step length and gait speed in the control group. Conclusion: Simultaneous stretching of ankle invertor and plantar flexion is effective in improving balance and walking ability in chronic stroke patients.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.11
• /
• pp.2052-2067
• /
• 2011

Complementary trees are two spanning trees rooted at the sink node satisfying that any source node's two paths to the sink node on the two trees are node-disjoint. Complementary trees routing strategy is a special node-disjoint multi-path routing approach. Several complementary trees routing algorithms have been proposed, in which path discovery methods based on depth first search (DFS) or Dijkstra's algorithm are used to find a path for augmentation in each round of path augmentation step. In this paper, a novel path discovery method based on multi-tree-growing (MTG) is presented for the first time to our knowledge. Based on this path discovery method, a complementary trees routing algorithm is developed with objectives of low average path length on both spanning trees and low complexity. Measures are employed in our complementary trees routing algorithm to add a path with nodes near to the sink node in each round of path augmentation step. The simulation results demonstrate that our complementary trees routing algorithm can achieve low average path length on both spanning trees with low running time, suitable for wireless sensor networks in industrial scenarios.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.11 no.1
• /
• pp.191-213
• /
• 1984

This study was made on the facial profile of the normal Korean children using the roentgenographic cephalograms. The subjects consisted 51 males and 47 females children of primary dentition with the normal occlusion and acceptable profile. For this study 13 soft tissue profile landmarks were plotted and 14 liner length, 9 soft tissue thickness, 8 vertical height length, 12 angles of soft tissue profile, and 2 vertical proportion were measured. The mean and standard deviations in the subjects were calculated and compared between male and female. The following results were obtained : 1. By the significant test, total facial convexity angle and soft tissue thickness were no significant difference between both sexes. 2. Lower facial height was greater than upper facial height in both sexes. 3. The vertical length of the upper and lower lips were 21.95 mm, 40.74 mm in male and 21.62 mm, 39.63 mm in female. 4. In the relationship of the upper lip and lower lip to the Ricketts' esthetic line, the male was 1.3 mm, 1.18 mm and the female was 1.16 mm, 1.27 mm front of the esthetic line. 5. Compared with the angulation of flush terminal plane group and mesial step group, the mesial step group was greater than the flush terminal plane group except the chin angle.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.2
• /
• pp.446-455
• /
• 1994

An experimental study is conducted for the turbulent recirculating flow behind a backward-facing step when the oscillating jet is issued sinusoidally through a thin slit at the separation edge. Two key parameters are dealt with in the present experiment, i.e., the amplitude of forcing and the forcing frequency. The Reynolds number based on the step height is varied from 25,000 to 35,000. In order to investigate the effect of local forcing, turbulent structures are scrutinized for both the flow of forcing and the flow of no forcing. The growth of shear layer with a local forcing is larger than that of no forcing. The influence of a local forcing brings forth the decrease of reattachment length and the particular frequency gives a minimum reattachment length. The most effective frequency depends on the non-dimensional frequency, St/sub .theta./, based on the momentum thickness at the separation point. A comparative study leads to the conclusion that the large-scale vortical structure is strongly associated with the forcing frequency and the natural flow instability.

• Korean Journal of Applied Biomechanics
• /
• v.16 no.2
• /
• pp.85-95
• /
• 2006

The purpose of this study of which 10 University students in their twenties are the objects was to examine the causal differences of kinematic and electromyography during power walking and normal gait. We came to the following conclusions. 1) It took less time to stance phase, swing phase and whole gait time during power walking compared with normal gait. 2) During power walking, the step length and step length and lower limb length are longer than that of normal gait. 3) During power walking, ankle joint angle became more plantar flexed at LIC and RTO, knee joint angle become more flexed, so did hip joint angle at LIC and RTO. Besides during power walking the shoulder joint angle movement was bigger and elbow joint angle was more flexed as the trait of power walking. 4) During power walking, through out the phase the muscle activity of all muscle was higher expecially the muscle activity of Biceps brachii, gastrocnemius medialis, gastrocnemius lateralis, Soleus was higher. Therefore during power walking, one's scope of activity and muscle activity is relatively higher than those of normal gait, so power walking helps one strengthen muscular power and energy metabolism. This will be useful information for those who are interested in diet and well-being.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.38 no.6
• /
• pp.93-105
• /
• 2001

In the lossless step of Lattice Vector Quantization(LVQ), the lattice codewords produced at quantization step are enumerated into radius sequence and index sequence. The radius sequence is run-length coded and then entropy coded, and the index sequence is represented by fixed length binary bits. As bit rate increases, the index bit linearly increases and deteriorates the coding performances. To reduce the index bits across the wide range of bit rates, we developed a novel lattice enumeration algorithm adopting the set partitioning method. The proposed enumeration method shifts down large index values to smaller ones and so reduces the index bits. When the proposed lossless coding scheme is applied to a wavelet based image coding, the proposed scheme achieves more than 10% at bit rates higher than 0.3 bits/pixel over the conventional lossless coding method, and yields more improvement as bit rate becomes higher.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.20 no.4
• /
• pp.10-15
• /
• 1983

In this paper effective methods of demodulation and equalization in a 9600 bps modem have been studied. To reduce the number of multiplications required per symbol in demodula-tion, the method of using a decimation filter is presented. In the equalizer the optimum step size and the steady state mean-squared error (MSE) are obtained from computer simulation results. The performance of the first-order carrier phase tracking loop is compared with that of the second-order loop when carrier frequency offset exists. In addition, the finite word length effects in the equalizer are studied.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.211-211
• /
• 2012

Using spin-polarized density-functional theory calculations, we find that the existence of either Peierls instability or antiferromagnetic spin ordering is sensitive to hydrogen passivation near the step. As hydrogens are covered on the terrace, the dangling bond electrons are localized at the step, leading to step-induced states. We investigate the competition between charge and spin orderings in dangling-bond (DB) wires of increasing lengths fabricated on an H-terminated vicinal Si(001) surface. We find antiferromagnetic (AF) ordering to be energetically much more favorable than charge ordering. The energy preference of AF ordering shrinks in an oscillatory way as the wire length increases. This oscillatory behavior can be interpreted in terms of quantum size effects as the DB electrons fill discrete quantum levels.

• Journal of Energy Engineering
• /
• v.24 no.2
• /
• pp.110-114
• /
• 2015

A numerical investigation has been carried out on recirculation zone formed downstream of a compressible flow over a backward facing step. The study has been performed by solving Two-Dimensional Navier-Stokes equations. The system of governing equations has been solved, using an explicit Harten-Yee Non- MUSCL Modified flux type TVD scheme and a zero-equation algebraic turbulence model to calculate the eddy viscosity coefficient. The recirculation region dimensions are characterized over a range of Mach numbers of fixed step height 5mmThe detail of recirculation zone such as pressure, temperature, recirculation length, strength etc are reported. The variations of these characteristics due to change of Mach number are also presented.