• 한국수자원학회논문집
• /
• 제51권4호
• /
• pp.313-322
• /
• 2018

Step의 높이는 하상재료 입경의 크기와 거의 같은 상관관계가 있으며, 하도경사에 따라 증가하고, 하도 폭과 step 파장은 거의 같은 크기로서 하도경사가 증가하면 step 파장은 감소하는 것으로 분석되었다. 하도 폭과 step 폭은 뚜렷한 상관관계가 있으며, 하도 폭의 증가에 따라 step 폭도 증가하는 것으로 분석되었다. 또한, step 파장은 하도 폭에 의하여 규모가 정해지고, step 높이는 step을 형성하는 암석의 크기에 의해 지배되기 때문에 step-pool의 종단면의 하상구조는 하도경사에 따라 변화하는 것으로 판단된다. Pool의 규모는 하도 폭, 입경 및 하도경사와 상관성이 큰 것을 확인하였다. 따라서 하천의 step-pool 구조 특성은 다양한 인자들의 영향을 받지만 대표적으로 입경, 하도 폭 및 하도경사로서 설명할 수 있는 것으로 분석되었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.635-639
• /
• 2003

When we carry out acoustic holography, step-by-step measurement provides us larger aperture size with same number of microphones. But when we carry out step-by-step measurement, it is blown that sound signal must be stationary. However, when transfer function between input and output signal is time-invariant, we can apply step-by-step measurement to acoustic holography even if sound signal is transient We have to do only some Processing on signals from step-by-step measurements to make the signal data of each step compatiable with other steps. This paper accounts for that processing method.

• Journal of applied mathematics & informatics
• /
• 제20권1_2호
• /
• pp.485-489
• /
• 2006

In this paper, we slightly improve the Baby-step Giant-step for certain elliptic curves. This method gives the running time improvement of $200\%$ in precomputation (Baby-step) and requires half as much storage as the original Baby-step Giant-step method.

• 한국전자거래학회지
• /
• 제1권2호
• /
• pp.133-160
• /
• 1996

It is accomplished on the practical usage for STEP in enterprise. But they has feeble grasp of STEP, therfore it is hard to apply. That is due to take a negative policy with the lack of advertising and understanding, most of studies are going on a studentlike attitude rather than the practical usage or implementation, so they don't know exactly what is STEP, and how can they apply to their own enterprise. This paper aimed to present more detail understanding of STEP usage and practical usage of STEP data in enterprise. We describe EXPRESS that is description method of STEP, four ways of implementation method, and introduce to using ST-Developer and ST-Oracle by STEP Tools Inc. for more detail understand of STEP. Thereafter we propose practical usage of STEP with CAD systems and PDM systems on the knowledge of previous study, and propose total system implementation image on STEP data in enterprise, finally discuss conclusion and luther study issues.

• 한국CDE학회논문집
• /
• 제8권1호
• /
• pp.48-54
• /
• 2003

In a design-to-manufacturing environment, the product data is shared by various CAD/CAM/CAE systems with little integration or substantial data redundancy. The main purpose of this paper is to build a database containing all the features required for STEP-NC machining and to show how a STEP-NC repository can support the complete process for machining. A STEP-NC database schema has been constructed and several query functions have been built for the purpose of implementing the retrieving system of a STEP-NC database. The EXPRESS data model of ISO 14649 has been mapped to the database data definition language of the Oracle database. To apply the STEP-NC database to an industry example, the ISO 14649 part program has been stored into the STEP-NC database. To implement example scenarios, the sample query interface has been built.

• 한국임상수의학회지
• /
• 제35권2호
• /
• pp.39-45
• /
• 2018

We evaluated the effects of green tea extract (GTE) supplementation at different dilution steps on boar sperm freezing and in vitro fertilization. Sperm intracellular hydrogen peroxide ($H_2O_2$), motility, viability, acrosome integrity and morphology were determined. In addition, sperm IVF parameters (penetration and monospermy) and glutathione (GSH) levels of presumptive zygotes (PZs) were evaluated. Semen was diluted in lactose egg yolk (LEY) and cooled at $5^{\circ}C$ for 3 h (first dilution step) and then diluted in LEY with 9% glycerol and maintained at $5^{\circ}C$ for 30 min (second dilution step). Four experimental groups were compared: first and second dilution steps without GTE (control), first dilution step with GTE (Step 1), second dilution step with GTE (Step 2) and first and second dilution step with GTE (Step 1+2). The spermatozoa were frozen in nitrogen vapor. Higher sperm motility, viability and acrosome integrity after thawing were observed in Step 1, Step 2 and Step 1+2 groups compared with the control (P < 0.05). Lower $H_2O_2$ level was observed in Step 1+2 compared with control and Step 1 (P < 0.05). For IVF, matured oocytes were co-cultured with spermatozoa frozen according to the experimental groups. GSH levels of PZs were significantly higher in Step 2 and Step 1+2 than in control and Step 1 (P < 0.05) without a significant difference in IVF parameters. In conclusion, supplementation with GTE in both first and second dilution steps during the freezing process resulted in better boar sperm cryopreservation and might be beneficial for further embryo development.

• 한국정밀공학회지
• /
• 제19권2호
• /
• pp.26-32
• /
• 2002

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2004년도 춘계공동학술대회 논문집
• /
• pp.249-256
• /
• 2004

STEP-NC 는 기존의 G-code 를 대체할 새로운 CNC 인터페이스 언어로써 현재 밀링 공정에 대해서는 국제 표준 단계에 있으며 조만간 기존의 G-code 를 대체할 것으로 기대된다. 그러므로 국내에서도 CAD-CAM 업체, CNC maker, 공작기계 제작 업체, 사용자 등 생산 환경 전반에 걸쳐 이에 대한 대응이 시급하다. 본 논문에서는 국내에서의 STEP-NC 의 promotion 을 위해 1) STEP-NC data model 을 분석하고, 2) 파트 프로그램의 작성 방법을 자세히 설명하고, 3) STEP AP203 CAD 파일로부터 STEP-NC 파트 프로그램을 생성하는 과정을 Korea STEP-NC 시스템을 통해서 설명하였다.

• 대한전자공학회논문지
• /
• 제27권6호
• /
• pp.871-878
• /
• 1990

The control method which electrically subdivides 1 step(1.8\ulcornerstep) of a PM step motor into 64 micro-step (0.028\ulcornerstep) is realized using micro-step algorithm on the basis of the look up table method and the position and velocity control using Z-80 microprocessor is also realized. With micro-stepping. The resolution of the system is improved, also by micro-step control of driving-current of the step motro, which is followed by the increase of micro-step subdivision-coefficient, the precise position and velocity control of step-motor can be realized and the stabilization of the system is improved.

• 한국CDE학회논문집
• /
• 제9권1호
• /
• pp.11-18
• /
• 2004

CAD systems have been developed with network technology and it is needed to exchange product data among them. STEP becomes world-wide international standard to exchange CAD data among various heterogeneous CAD systems in manufacturing industrial fields. We report results to test errors that can happen when exchanging STEP files of product model through the STEP translator of different commercial CAD systems. Also the tests of Korean Character, Hangul, have been carried out. And also we report the STEP rallies held twice in Korea and several rounds abroad, and their testing results are shown as tables and graphs. The tested results can be used for exchanging product models to the next domestic STEP Rally and extended to Northeastem Asian STEP rally by steadily contacting with the organizations for Asian STEP centers such as JSTEP(Japan) and CSTEP(China). Finally we expect that the result can be used to specify STEP standardization in the field of managing product data.