• Journal of Microbiology and Biotechnology
• /
• 제12권5호
• /
• pp.722-728
• /
• 2002

Eight strains producing bacterial cellulose (BC) were isolated from rotten fruits and traditionally fermented vinegars. One of the isolated strains from the rotten grape in Gwangju, Korea, maintained a relatively stable BC production in shaking cultures. This isolated strain proved to be Acetobacter xylinum, based on several biochemical and morphological tests. It was shown that the slant-baffled flask was more efficient than the conventional flask for the BC production in shaking cultures. To determine the most suitable carbon and nitrogen sources for the production of BC, various compounds were examined. Fructose was found to be the most effective carbon source with an optimal concentration of 2%. Mixed carbon source (glucose:fructose=1:3) was also better than glucose or fructose alone. Optimal nitrogen source, when basal medium was used, was 10% (v/v) com steep liquor (CSL). When com steep liquor was used with a mixed carbon source (glucose:fructose=1 :3),4% CSL exhibited the best BC production. Based on these results, a defined medium was developed for the BC production by Acetobacter xylinum KJ-1. When this medium was used under optimal culture conditions, the BC production was 7.2 g/1, which was approximately 3 times higher than that with the traditional HS medium.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 추계학술대회 논문집(제1권)
• /
• pp.205-210
• /
• 2006

해양구조물 설계시 급격한 파랑에 의한 충격력은 구조물 안전을 위한 중요한 설계인자이다. 이러한 충격력은 과도한 하중이 극히 짧은 시간 사이에 발생하는 현상으로 실험적 또는 수치해석적으로 해석하기 매우 어려운 문제이다. 본 연구에서는 급격한 파랑에 의한 충격력을 해석하기 위하여 수치파수조를 이용하여 N.S. 방정식에 기반한 수치해석을 수행하였다. 임의파를 선형중첩에 기반하여 조파기를 작동시켜 재현하였고 다블록격자하에서 수직실린더에 작용하는 충격력을 수치해석하였다. 한편 자유표면은 V.O.F. 및 local height function을 이용하여 추적하였다. 수치해석 검증을 위하여 수치해석 및 실험 결과와 비교를 수행하였는데 비교적 만족할 수 있는 결과를 확인하였으나 해양구조물 설계시 유용한 결과를 얻기 위해서는 쇄파와 같은 극한파 재현과 극한파에 의한 충격력에 대한 많은 연구가 지속되어야 함을 알 수 있었다.

• 한국식품영양과학회지
• /
• 제32권2호
• /
• pp.181-184
• /
• 2003

G. persimonensis-KJ145를 차용하여 BC 생산과 식초생산에 미치는 에탄올의 영향을 조사하였다. 그 결과 사과쥬스배지에 에탄올을 2%(v/v) 첨가하였을 때 BC의 생산성이 가장 좋았으며, 7%(v/v)를 첨가하였을 때 총산의 함량이 가장 높았다. BC와 식초를 동시 생산하기 위해서는 에탄올을 5%(v/v) 첨가하는 것이 가장 좋을 것으로 생각되며 발효과정 중의 식초 품질 변화에 대한 보다 자세한 연구가 요구되었다. BC와 식초 생산에 가장 효과적인 질소원은 CSL인 것으로 조사되었고 최적 농도는 15%(w/v)이었다. 배양시간의 영향을 조사한 결과 14일간 배양하는 것이 가장 많은 양의 BC를 생산하였으며, 최적조건에서 생산되는 BC 생산량은 7.55 g/L이었다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2005년도 추계 학술대회논문집
• /
• pp.105-110
• /
• 2005

Evaluation of elliptic blending turbulence model (EBM) together with the two-layer model, shear stress transport (SST) model and elliptic relaxation model (V2-F) is performed for a better prediction of thermal stratification in an upper plenum of a liquid metal reactor by applying them to the experiment conducted at JNC. The algebraic flux model is used for treating the turbulent heat flux. There exist much differences between turbulence models in predicting the temporal variation of temperature. The V2-F model and the EBM better predict the steep gradient of temperature at the interface of thermal stratification, and the V2-F model and EBM predict properly the oscillation of temperature. The two-layer model and SST model fail to predict the temporal oscillation of temperature.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2004년도 추계 학술대회논문집
• /
• pp.221-225
• /
• 2004

Evaluation of turbulence models is performed for a better prediction of thermal stratification in an upper plenum of a liquid metal reactor by applying them to the experiment conducted at JNC. The turbulence models tested in the present study are the two-layer model, the $\kappa-\omega$ model, the v2-f model and the low-Reynolds number differential stress-flux model. When the algebraic flux model or differential flux model are used for treating the turbulent heat flux, there exist little differences between turbulence models in predicting the temporal variation of temperature. However, the v2-f model and the low-Reynolds number differential stress-flux model better predict the steep gradient o( temperature at the interface of thermal stratification, and only the v2-f model predicts properly the oscillation of temperature. The LES Is needed for a better prediction of the amplitude and frequency of the temperature fluctuation.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.481-482
• /
• 2008

We have designed a Marx Generator, named EMD Pulse Generator(EPG), which makes steep front high voltage, 50ns rise time and 200kV high. It was designed as coaxial type and in small size, 70cm high and 20cm in diameter. The firing system is trigatron type and the spark gap switches in each stage are coaxial with the axis of the system. In this paper we mention about the characteristics of EPG and several experimental data.

• Journal of Electrical Engineering and information Science
• /
• 제3권2호
• /
• pp.261-266
• /
• 1998

This paper describes the fabrication and characterization of dual-polysilicon gated surface channel 0.1$\mu\textrm{m}$ CMOSFETs using BF2 and arsenic as channel dopants. We have used and LDD structure and 40${\AA}$ gate oxide as an insulator. To suppress short channel effects down to 0.1$\mu\textrm{m}$ channel length, shallow source/drain extensions implemented by low energy implantation and SSR(Super Steep Retrograde) channel structure were used. The threshold voltages of fabricated CMOSFETs are 0.6V. The maximum transconductance of nMOSFET is 315${\mu}$S/$\mu\textrm{m}$, and that of pMOSFET is 156 ${\mu}$S/$\mu\textrm{m}$. The drain saturation current of 418 ${\mu}$A/$\mu\textrm{m}$, 187${\mu}$A/$\mu\textrm{m}$ are obtained. Subthreshold swing is 85mV/dec and 88mV/dec, respectively. DIBL(Drain Induced Barrier Lowering) is below 100mV. In the device with 2000${\AA}$ thick gate polysilicon, depletion in polysilicon near the gate oxide results in an increase of equivalent gate oxide thickness and degradation of device characteristics. The gate delay time is measured to be 336psec at operation voltage of 2V.

• 한국지역지리학회지
• /
• 제8권4호
• /
• pp.468-479
• /
• 2002

태백 산지는 대체로 냉량하고 습한 편이지만, 강수량은 지역적으로 많은 차이를 나타내고 있다. 이와 같은 기후지형 환경과 관련하여 태백산지의 지형 및 토양환경은 기반암의 유형에 따라서 차이를 보인다. 북부의 금강산과 설악산 같은 화강암 분포 지역은 절리밀도의 차이를 반영하는 풍화 성향 때문에 암괴 노출이 심한 산지를 이루며, 미시령 일대의 편마암 분포 지역은 전사면이 흙으로 덮여있고 상대적으로 식생밀도가 높은 곳이다. 중부에서는 암괴 노출이 심한 타지역의 화강암산지와는 달리 박토상태지만 대체로 전사면이 흙으로 덮여있다. 이는 이 지역이 눈이 많고 서릿발 작용이 활발하여 화강암을 얇게나마 풍화시킬 수 있었기 때문이다. 남부에서는 급사면의 뾰족한 봉우리와 좁고 깊은 협곡을 이루는 석회암산지 및 완만한 사면지역의 여러 가지 용식지형이 발달한다. 이 지역에는 초본류나 관목류들이 연속성이 높게 분포하여 박토상태인 토양을 잘 보전하고 있다.

• 천문학회지
• /
• 제37권5호
• /
• pp.299-305
• /
• 2004

We find evidence of a hard X-ray excess above the thermal emission in two cool clusters (Abell 1750 and IC 1262) and a soft excess in two hot clusters (Abell 754 and Abell 2163). Our modeling shows that the excess components in Abell 1750, IC 1262, and Abell 2163 are best fit by a steep power law indicative of a significant non-thermal component. In the case of Abell 754, the excess emission is thermal, 1 ke V emission. We analyze the dynamical state of each cluster and find evidence of an ongoing or recent merger in all four clusters. In the case of Abell 2163, the detected, steep spectrum, non-thermal X-ray emission is shown to be associated with the weak merger shock seen in the temperature map. However, this shock is not able to produce the flatter spectrum radio halo which we attribute to post-shock turbulence. In Abell 1750 and IC 1262, the shocked gas appears to be spatially correlated with non-thermal emission suggesting cosmic-ray acceleration at the shock front.

• 한국전기전자재료학회논문지
• /
• 제18권1호
• /
• pp.96-103
• /
• 2005

To analyze the reason of aging deterioration in transmission line insulators, we performed a various kind of test and investigated mechanical and electrical characteristics of insulators. Test samples consisted of K-1989(36,000lbs), K-1995(36,000lbs) and K-2001(36,000lbs) type insulators which have been used in domestic 154 kV transmission lines. As a result of this test, the facts turned out K-2001 insulator which contain 17 wt.% alumina has better physical characteristics than K-1989 insulator which contain 8 wt% alumina. Relativity density and fracture toughness of K-1989 porcelain are 94.2 % and 1.4 MPa\ulcornerm$^{1}$2// but relativity density and fracture toughness of K-2001 porcelain are 96 % and 1.7 MPa\ulcornerm$^{1}$2//. K-2001 insulators show a good performance not only in a physical property test but also in power arc test and steep front of wave flashover test which is performed to evaluate electrical characteristics.