• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.8 no.2
• /
• pp.107-117
• /
• 1975

Alaska pollack caught in the Northern Pacific Ocean and frozen aboard vessel are skipped to the plant and processed into frozen fillets. In the present paper quality changes during thwaing, refreezing and storage at $-20^{\circ}C$ are discussed. Natural, running-water, vacuum and steam thawing were employed as thawing methods. And contact plate, air blast, immersion in dry ice-alcohol solution freezing and storage at $-5^{\circ}C$ were applied to refreeze the thawed fillets. As quality factors content of drip released, salt-extractable protein, VBN, DNA in the drip and pH were determined. In addition, bacteriological tests were also carried out along with the whole process. In thawing of round material, the vacuum thawing was more effective than any other method, resulting in drip, salt-extractable protein $(N\%)$, VBN and DNA as $4.4\%,\;1.82\%,\;16.21mg\%$ and $13.70\;{\mu}g/ml$, respectively. Storage at $-5^{\circ}C$ as refreezing method yielded lower in drip and DNA content but similar to or slightly higher in both salt-extractable protein and VBN, which might postulate that the quality of the frozen fillet depends not largely on the secondary freezing but on the conditions of thawing and primary freezing. It seemed that most of the bacterial flora in thawed fillet came from skin and viscera of fish, worker's hands, utensils and other processing facilities, since sanitary indicative bacteria were not detected in the frozen flesh of round Alaska pollack. Bacterial quality of fillet varied with thawing methods, vacuum thawing appeared more sanitative compared with other methods as natural, running-water, and steam thawing. Bacterial colonies isolated from the thawed fillet were composed of $73.8\%$ Gram negative rod shape, $4.9\%$ Gram positive rod shape, $18.0\%$ cocci, and $3.3\%$ yeast. Decreasing rate of coliform group of the fillet during the storage at $-20^{\circ}C$ for 30 days was more than $70\%$ and that of plate count was less than of coliform group.

• Journal of the Korea Institute of Building Construction
• /
• v.9 no.6
• /
• pp.113-119
• /
• 2009

This study is to investigate the fundamental and fireproof qualities of high strength concrete corresponding to changes in the curing factors and the PP fiber ratio. The results were as follows. For the fundamental characteristics of concrete, the fluidity was reduced in proportion to the increase in the PP fiber ratio. The compressive strength was somewhat reduced according to an increase in the PP fiber ratio. However, it had the high strength scope of more than 60 MPa at 7 days and of more than 90 MPa at 28 days. On the spalling mechanism followed by changes of the water content ratio, spalling was prevented in all combinations, except the specimen without PP fiber and subjected to 3.0% of moisture contents. When spalling was prevented at that time, the residual compressive strength ratio was 22%~41% and the mass reduction ratio was 5%~7%, which was relatively favorable. As the spalling mechanism corresponds to changes in the curing method, spalling was prevented in concrete with a PP fiber mixing ratio of more than 0.05% in the event of standard curing, and in concrete with a PP fiber mixing ratio of more than 0.10% in the case of steam curing and autoclave curing. In these cases, when spalling was prevented, the residual compressive strength ratio was 23~42% and the mass reduction ratio was 7~11%. In these results, the ease of spalling prevention in high strength concrete was inversely proportional to the water content ratio. Depending on the curing method, spalling was prevented in concrete with over 0.05% PP fiber with standard curing and in concrete with over 0.1% PP fiber with steam curing and autoclave curing.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.5
• /
• pp.29-38
• /
• 2013

The G-class cement is commonly used in practice for geothermal well cementing in order to protect a steel casing that is designed to transport hot water/steam from deep subsurface to ground surface during operating a geothermal power plant. In order to maintain optimal performance of geothermal wells, physical properties of the cementing material should be satisfactory. In this paper, relevant factors (i.e., groutability, uniaxial compression strength, thermal conductivity and free fluid content) of the G-class cement were experimentally examined with consideration of various water-cement (w/c) ratios. Important findings through the experiments herein are as follows. (1) Groutability of the G-class cement increases by adding a small dose of retarder. (2) There would be a structural defect caused when the w/c ratio is kept higher in order to secure groutability. (3) Thermal conductivity of the G-class cement is small enough to prevent heat loss from hot steam or water to the outer ground formation during generating electricity. (4) The G-class cement does not form free water channel in cementing a geothermal well. (5) The Phenolphthalein indicator is applicable to the distinction of the G-class cement from the drilling mud.

• Journal of the Korea Institute of Building Construction
• /
• v.15 no.3
• /
• pp.265-271
• /
• 2015

This study is intended to produce a PC (Precast Concrete) member without a steam curing process in developing the high early strength concrete satisfying the condition of 10MPa in compressive strength at the age of 6 hours, and is intended to ensure economic feasibility by increasing the turnover rate of concrete form. Hence, high early strength cement with high $C_3S$ content and the hardening accelerator of powder type accelerating the hydration of $C_3S$ was used. And the properties of concrete were evaluated according to the hardening accelerator mixing ratio (0, 1.2, 1.6, 2.0). No big difference was found from the tests of both slump and air content. When 1.6 % or higher amounts of the hardening accelerator were mixed, the compressive strength of 10MPa was achieved at the age of 6 hours. From the test results of autogenous (drying) shrinkage and plastic shrinkage, it can be seen that there was a difference according to hydration reaction rate due to the addition of the hardening accelerator. However, it was shown that no problem arose with crack and durability. And it was shown that resistance to freezing-thawing, carbonation, and penetration were excellent.

• Food Science and Preservation
• /
• v.30 no.6
• /
• pp.983-990
• /
• 2023

This study was conducted to develop a preservation technology that can induce changes in physicochemical properties to effectively utilize of persimmon leaves. The application effects of steaming or freezing technique were investigated. Astringent persimmon leaves were steam-blanched (100℃, 30 sec) or frozen (-20℃, 15 d), followed by hot-air drying (50℃). The physicochemical properties of the extract obtained by hot-water leaching from the dried leaves were compared. The extract of leaves dried without pretreatment was used as a control. L* value was higher in steamed than in control and frozen. a* value was highest in the control. The browning index was higher in the frozen and lower in the steamed than in the control. Soluble solids were the highest in the steamed and the lowest in the frozen. Sucrose content was relatively high in the steamed, and the glucose and fructose contents were relatively high in the frozen. Total polyphenol content and DPPH radical scavenging activity were higher in steamed and lower in frozen than in control. Thus, it was confirmed that steam or freeze pretreatment after harvesting persimmon leaves affects the extraction yield, color, antioxidant capacity and component changes of dried persimmon leaves. Unlike steaming, freezing pretreatment showed the effect of promoting decomposition and browning reactions, and it is considered useful when such an effect is needed.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.4
• /
• pp.285-294
• /
• 2024

This study aims to enhance learners' creative and integrative thinking through the use of a practical music education program, facilitating high-quality artistic activities and the integration of various disciplines. To achieve this, a practical music education program incorporating the PDIE model was designed, and the content validity of the developed program was verified. Through this process, We have researched and described methodologies for multidisciplinary research that can be applied in practical music education. This paper focuses on the fourth session of the study, which deals with the creative and integrative education of practical music and mathematics. The mathematical theory of interest in this research is the Fibonacci sequence, fundamental to the golden ratio in art. The goal is to enable balanced and high-quality creative activities through learning and applying the Fibonacci sequence. Additionally, to verify the validity and effectiveness of the instructional plan, including the one used in the 15-week course, we have detailed the participants involved in the content validation, the procedures of the research, the research tools used, and the methods for collecting and analyzing various data. Through this, We have confirmed the potential of creative and integrative education in higher practical music education and sought to develop educational methodologies for cultivating various creative talents in subsequent research.

• Applied Biological Chemistry
• /
• v.37 no.1
• /
• pp.1-8
• /
• 1994

This study was carried out to investigate the changes in volatile constituents concerning with the flavor of the green ginger (Zingiber officinale Roscoe) during storage in underground pit ($15^{\circ}C$, RH 95%). And the constituents of essential oil of etiolated shoots formed on the mother rhizomes during the five months storage in the dark under same conditions were compared with those of mother rhizomes. The essential oils of Korean domestic ginger (Bong-dong cultivar) were isolated by simultaneous steam distillation and extraction method (SDE). Then the compositions of the essential oils were analysed by GC and GC-MS spectrometry. The major compounds of essential oil from the fresh rhizomes were zingiberene, $citronellol+{\beta}-sesquiphellandrene$, ${\beta}-phellandrene$, camphene, geranial, ${\gamma}-bisabolene$, ar-curcumene+geranyl acetate, ${\alpha}-pinene$, ${\beta}-gurjunene$, limonene and neral. The content of monoterpene hydrocarbons increased with a concomitant lowering in the amounts of sesquiterpene hrdrocarbons and oxygenated sesquiterpenes during storage of rhizomes although contents of the oxygenated monoterpens changed little or slightly during the storage. During the storage the content of such monoterpenes as camphene, ${\beta}-phellandrene$ and citral (neral and geranial) increased whereas the content of such sesquiterpenes as zingiberene and $citronellol+{\beta}-sesquiphellandrene$ decreased. The composition of shoot oil differed from that of mother rhizome oil in having higher content of terpene hydrocarbons and also in the higher content of bornyl acetate, ${\beta}-gurjunene$ and ar-curcumene+geranyl acetate and lower in citral (neral and geranial).

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.6
• /
• pp.775-781
• /
• 1995

This study was conducted to find out the variation in some medicinal components of Korean green tea by processing recipe and harvesting time in Bongsan-ri(steamroasted green tea) and Buchun-ri(roasted green tea) area. Total chlorophyll content of green tea grown at Bongsan-ri and Buchun-ri was 293mg% and 275mg% and ratio of chlorophyll a to chlorophyll b was 70:30 and 67:33 respectively. The later harvested one had the higher chlorophyll content but the chlorophyll content of the last harvested green tea at Buchun-ri decreased more sharply. Water-soluble pectin of green tea produced at Bongsan-ri and Buchun-ri was 2.05% and 1.84%, respectively. It also increased at the later harvested ones. Total amino acids content of Bongsan-ri and Buchun-ri tea was 2,156mg% and 1,723mg%, respectively. The later harvested tea showed the remarkably decreased. Caffein and catechins of Bongsan-ri and Buchun-ri tea were 2.03%, 11.52% and 2.62%, 14.05%, respectively, Total free catechins content of Bongsan-ri and Buchun-ri tea was 35.59% and 42.73%, and ester type was 58.09% and 44.47%, respectively. Extracted catechins and caffeins of green tea were increased when extracting water temperature was raised from $65^{\circ}C$ to 85$^{\circ}C$ and leaching time was lengthened from 3min. to 9min. About 89% catechins and 97% caffeins of green tea was extracted by nine minutes soaking in 85$^{\circ}C$ water.

• The Korean Journal of Petroleum Geology
• /
• v.14 no.1
• /
• pp.1-11
• /
• 2008

As conventional oil and gas reservoirs become depleted, interests for oil sands has rapidly increased in the last decade. Oil sands are mixture of bitumen, water, and host sediments of sand and clay. Most oil sand is unconsolidated sand that is held together by bitumen. Bitumen has hydrocarbon in situ viscosity of >10,000 centipoises (cP) at reservoir condition and has API gravity between $8-14^{\circ}$. The largest oil sand deposits are in Alberta and Saskatchewan, Canada. The reverves are approximated at 1.7 trillion barrels of initial oil-in-place and 173 billion barrels of remaining established reserves. Alberta has a number of oil sands deposits which are grouped into three oil sand development areas - the Athabasca, Cold Lake, and Peace River, with the largest current bitumen production from Athabasca. Principal oil sands deposits consist of the McMurray Fm and Wabiskaw Mbr in Athabasca area, the Gething and Bluesky formations in Peace River area, and relatively thin multi-reservoir deposits of McMurray, Clearwater, and Grand Rapid formations in Cold Lake area. The reservoir sediments were deposited in the foreland basin (Western Canada Sedimentary Basin) formed by collision between the Pacific and North America plates and the subsequent thrusting movements in the Mesozoic. The deposits are underlain by basement rocks of Paleozoic carbonates with highly variable topography. The oil sands deposits were formed during the Early Cretaceous transgression which occurred along the Cretaceous Interior Seaway in North America. The oil-sands-hosting McMurray and Wabiskaw deposits in the Athabasca area consist of the lower fluvial and the upper estuarine-offshore sediments, reflecting the broad and overall transgression. The deposits are characterized by facies heterogeneity of channelized reservoir sands and non-reservoir muds. Main reservoir bodies of the McMurray Formation are fluvial and estuarine channel-point bar complexes which are interbedded with fine-grained deposits formed in floodplain, tidal flat, and estuarine bay. The Wabiskaw deposits (basal member of the Clearwater Formation) commonly comprise sheet-shaped offshore muds and sands, but occasionally show deep-incision into the McMurray deposits, forming channelized reservoir sand bodies of oil sands. In Canada, bitumen of oil sands deposits is produced by surface mining or in-situ thermal recovery processes. Bitumen sands recovered by surface mining are changed into synthetic crude oil through extraction and upgrading processes. On the other hand, bitumen produced by in-situ thermal recovery is transported to refinery only through bitumen blending process. The in-situ thermal recovery technology is represented by Steam-Assisted Gravity Drainage and Cyclic Steam Stimulation. These technologies are based on steam injection into bitumen sand reservoirs for increase in reservoir in-situ temperature and in bitumen mobility. In oil sands reservoirs, efficiency for steam propagation is controlled mainly by reservoir geology. Accordingly, understanding of geological factors and characteristics of oil sands reservoir deposits is prerequisite for well-designed development planning and effective bitumen production. As significant geological factors and characteristics in oil sands reservoir deposits, this study suggests (1) pay of bitumen sands and connectivity, (2) bitumen content and saturation, (3) geologic structure, (4) distribution of mud baffles and plugs, (5) thickness and lateral continuity of mud interbeds, (6) distribution of water-saturated sands, (7) distribution of gas-saturated sands, (8) direction of lateral accretion of point bar, (9) distribution of diagenetic layers and nodules, and (10) texture and fabric change within reservoir sand body.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.7
• /
• pp.979-985
• /
• 2001

Two experiments on commercial broiler chickens (3-37 d) and WL layers (252-364 d) were conducted to study the relative bioavailability of phosphorus (P) from different P supplements in comparison to tricalcium phosphate (TCP), at constant dietary calcium (Ca):P ratio. The P sources tested were dicalcium phosphate (DCP), steam sterilized bone meal (SSBM), commercial mineral mixture (CMM), phosphoric acid (PA) and a combination of CMM + PA. Fluorine (F) content in CMM and SSBM was 13.12 and 0.14 g/kg, respectively. In commercial broiler diets, DCP, SSBM or PA could be used as supplemental P sources without affecting (p<0.05) weight gain, feed intake, tibia ash and, P and Ca contents in tibia ash when compared to TCP. Severity of leg abnormality and deposition of F in bone were higher (p<0.05) in group fed CMM. P retention and serum inorganic P content was significantly reduced (p<0.05) in CMM fed birds compared to those fed TCP, SSBM, PA or CMM+PA. Among other P sources (TCP, SSBM, PA and CMM+PA) the serum inorganic P levels did not vary significantly (p<0.05). The P retention also significantly reduced in CMM fed groups compared to those fed DCP or PA. The P retention significantly increased from 0.183 to 0.216 units by supplementation of PA to CMM diet. In layers, egg production was not affected by replacing TCP with DCP, SSBM, PA or CMM+PA, but significantly (p<0.05) reduced with CMM. Feed (kg)/kg egg mass, egg weight, shell quality (shell weight and shell thickness) and serum Ca levels were not influenced by dietary variation in P source. The poor performance of both broilers and layers fed on CMM based diets could be attributed to the presence of hlgher levels of F (647.8 and 630.1 mg/kg, respectively) and low P utilization. Based on growth, bone mineralization and P retention it is concluded that DCP, SSBM or PA can be used as alternatives to TCP in broiler diets. In WL layer diets, in addition to above P sources, CMM can also be used as supplemental P source by replacing one half of P from CMM with PA without affecting egg production and shell quality.