• 제목/요약/키워드: STC

검색결과 230건 처리시간 0.024초

오산화바나듐의 수소 환원에 의한 이산화바나듐의 제조 및 열변색 특성 (Preparation of Vanadium Dioxide by Hydrogen Reduction of Vanadium Pentoxide and its Thermochromic Properties)

  • 최승훈;이춘부
    • 자원리싸이클링
    • /
    • 제26권5호
    • /
    • pp.61-66
    • /
    • 2017
  • 이산화바나듐은 적외선 투과를 차단하거나 창을 통해 건물 내부열 손실을 막아주는 광선택적 유리코팅 소재로 알려졌는데, 본 연구에서 이와 같은 열변색 특성을 가진 이산화바나듐을 수소와의 환원반응을 통하여 제조하는 방법에 대해 연구하였다. 환원반응에 의한 이산화바나듐의 제조는 반응이 쉽게 진행되고, 스퍼터, 빔 증발기 등과 같은 반도체 장비가 필요 없이 공정이 단순하고 대량생산에 용이한 장점을 갖고 있는데, 본 연구에서 수소와의 환원반응에 대한 반응온도, 반응시간, 환원가스의 농도 및 사후 열처리 조건, 첨가제로서 텅스텐의 첨가 등에 대해 실험을 수행하였으며, 최적조건을 도출하여 제조된 이산화바나듐 분말의 특성과 열변색 특성에 대해 조사하였다. 본 연구를 통해 개발된 이산화바나듐이 전자소재 및 에너지 저감 소재로서 많이 활용될 것으로 기대되고 있다.

태양광발전시스템 국내 지역별 발전특성 분석 (Analysis of Power Generation Characteristics of a Photovoltaic System in Korea)

  • 이현승;김법전;신우철
    • 한국태양에너지학회 논문집
    • /
    • 제39권2호
    • /
    • pp.33-43
    • /
    • 2019
  • In this study, reflecting long-term climate characteristics, we analyzed electricity generation and generation characteristics of 3kWp PV system, which was semi-integrated with air duct behind. Using PVsyst as a simulation analysis tool, we inputted "National reference standard weather data" of 16 regions as a typical climatic data. The result is summarized as follows: First, the national average annual electricity generation was 1,312 kWh/kWp (StDev, ${\sigma}=71$). It was most abundant in Mokpo with 1,434 kWh/kWp, which was average 21% greater than the lowest with 1,165 kWh/kWp in Seoul and 1,197 kWh/kWp in Jeju. National average daily generating time based on STC was 3.6 hours (${\sigma}=0.43$), and that of Mokpo and Seoul was 3.9 and 3.2 hours respectively. Second, Jeju showed the great difference of annual monthly generation by month (annual average = 99.7 kWh/kWp, ${\sigma}=25.5$), while Jinju showed the smallest difference (annual average = 115.5 kWh/kWp, ${\sigma}=10.6$). Generation in Jeju was at the largest in April with 132.2 kWh/kWp, which was 2.3 times greater than the lowest 55.2 kWh/kWp in January. However, generation in Jinju was at the largest in March with 129.3 kWh/kWp, which was only 1.3 times greater than the lowest 101.1 kWh/kWp in June. Third, the annual average PR was the highest in Incheon with 85.8% and the lowest in Jeju with 83.2%. PR of Mokpo was 84.3%, which was lower than that of national average.

혈청지질분포와 치주질환간의 연관성에 관한 융합연구 (The Association Between Serum Lipid profiles and periodontitis on Convergence)

  • 김송숙;김지현
    • 한국융합학회논문지
    • /
    • 제10권1호
    • /
    • pp.239-244
    • /
    • 2019
  • 본 연구의 목적은 우리나라 30세이상 성인의 혈청지질분포와 치주질환간의 관련성을 파악하고자 하였다. 본 연구자료는 2013년, 2014년 국민건강영양조사 자료를 병합하여 이용하였으며, 최종분석대상자는 8,854명이었다. 치주질환은 지역사회치주지수를 이용하였으며, 혈청지질분포와 치주질환간의 관련성을 파악하기 위해 로지스틱회귀분석을 이용하였다. 연구결과 HDL 이 ${\leq}40mg/dL$ 인 경우에서 치주질환 교차비가 1.39배(95% CI=1.16-1.66)증가하였으며, Triglyceride가 ${\geq}200mg/dL$ 인 경우에서 치주질환 교차비가 1.14배(95% CI=1.02-1.27) 유의하게 증가하였다. HDL과 Triglyceride가 치주질환과 유의한 관련성이 있음을 확인하였다. 따라서, 향후 연구에서는 혈청지질분포와 치주질환간의 실질적 관련성을 파악하고 인과관계와 직접적인 연관성을 파악해야 할 것이다.

수송류 항공기용 금속계 제동패드의 역설계 절차 (Reverse Engineering Procedure of Metal Brake Pad for Part 25 Aircraft)

  • 김민지;김경일;김경택
    • 한국항행학회논문지
    • /
    • 제27권5호
    • /
    • pp.621-628
    • /
    • 2023
  • 본 연구는 항공기용 부품 및 장비품 중 치명성 부품인 수송류 항공기용 금속계 제동패드의 부품등제작자증명 및 부가형식증명을 위한 원 부품 등과 개발품의 설계 동일성 입증을 위한 역설계 절차를 도출하였다. 역설계 절차에 대한 규정은 우리나라의 경우 부품등제작자증명 지침에 의해 규정되며, 미국의 경우 AC No; 21.303-4에 규정되어 있다. 제동패드의 역설계 절차는 각 구성품별 샘플 수량, 치수공차, 기계적 물성 측정, 자재, 무게 및 부피특성 등의 동일성 확인 항목을 선정하여 각각의 세부 절차를 정의하였다. 아울러 우리나라 및 미국의 연방항공규정을 분석한 결과, 우리나라의 경우 수송류 항공기용 제동장치의 기술표준품 표준서 및 비행시험과 관련된 규정의 제정이 필요하다.

점착필름 절단용 다이 칼날 소재에 적용된 점착 방지 코팅의 물 접촉각 및 박리강도에 관한 연구 (A Study on Water Contact Angle and Peel Strength by Anti- Adhesion Coating on Die Blade Materials for Adhesive Film Cutting)

  • 하유진;김민욱;김욱배
    • Tribology and Lubricants
    • /
    • 제39권5호
    • /
    • pp.190-196
    • /
    • 2023
  • Anti-adhesion coatings are very important in the processing of adhesive materials such as optical clear adhesive (OCA) films. Choosing the appropriate release coating material for dies and tools can be quite challenging. Hydrophobic surface treatment is usually performed, and its performance is often estimated by the static water contact angle (CA). However, the relationship between the release performance and the CA is not well understood. In this study, the water CAs of surfaces coated with anti-adhesion materials and the peel strengths of the acrylic-based adhesive films are evaluated. STC5 and SUS304 are selected as the base materials. Base materials with different surface roughnesses are produced by hairline finishing, mirror-polishing, and end milling. Four fluoropolymer compounds, including a self-assembled monolayer, are selected to make the base surface hydrophobic. Static, advancing, and receding CAs are mostly increased due to the coating, but the CA hysteresis is found to increase or decrease depending on the coating material. The peel strengths all decreased after coating and are largely dependent on the coating material, with significantly lower values observed for fluorosilane and perfluoropolyether silane coatings. The peel strength is observed to correlate better with the static CA and advancing CA than with the receding CA or hysteresis. However, it is not possible to accurately predict the anti-adhesion performance based on water CA alone, as the peel strengths are not fully proportional to the CAs.

수송류 항공기용 금속계 제동패드의 다이나모시험 절차 (Dynamometer Test Procedure of Metal Brake Pad for Part 25 Aircraft)

  • 김민지;김경일;김경택
    • 한국항행학회논문지
    • /
    • 제27권6호
    • /
    • pp.821-827
    • /
    • 2023
  • 본 연구에서는 국내 및 미국의 항공기 기술기준과 기술표준품 표준서를 분석하여 수송류 항공기용 금속계 제동패드의 비행시험 인증을 위한 합치성 증명 시 요구되는 다이나모시험절차를 도출하였다. 제동장치의 설계개조는 중대한 변경으로 분류되어 부가형식증명 및 부품등제작증명이 동시에 요구된다. 다이나모시험 항목은 미국의 제동장치 기술표준품 표준서인 TSO-C135a 규정에 따라 비행시험의 적합성을 판단하는 기준으로 비행시험 시 요구되는 주요 시험항목 중 설계착륙-정지 시험, 가속-정지 시험 및 최대 하중상태의 착륙-정지 시험을 선정하였다. 다이나모시험 조건은 항공기 제조사가 제공하는 주요 사양에 따라 정해지며, 제동패드의 조건, 감속도 및 시험횟수 등은 TSO-C135a 규정에 따라 정의하였다.

Characterization of Respirable Suspended Particles and Polycyclic Aromatic Hydrocarbons associated with Environmental Tobacco Smoke

  • Baek, Sung-Ok;Park, Jin-Soo;Kim, Mi-Hyun;Roger A, Jenkins
    • Journal of Korean Society for Atmospheric Environment
    • /
    • 제16권E호
    • /
    • pp.1-17
    • /
    • 2000
  • In this study, the concentrations of particulate organic constituents of environmental tobacco smoke(ETS) were determined using an environmental smog chamber, where ETS is the sole source of target compounds. ETS was generated in a 30 ㎥ environmental chamber by a number of different cigarettes, including the Kentucky 1R4F reference cigarette and eight commercial brands. A total of 12 experimental runs was conducted, and target analytes included a group of ETS markers both in vapor and particulate phase and a class of polycylic aromatic hydrocarbos(PAHs) associated with ETS particles. The mass concentrations of PAH in ETS particles were also determined. The average contents of benzo(a) pyrene and benzo(a) anthracene in ETS particles for the commercial brands were 12.8 and 21.5$\mu\textrm{g}$/g, respectively, There values are all somewhat higher than those determined previously by other studies. Results form the chamber study are further used to estimate the average and variability of cigarette yields for target compounds associated with ETS. Finally, ratios of RSP to the surrogate standards of UVPM, FPM and solanesol were calculated for each sample. The average conversion factors factors for the eight commercial brands were 7.3, 38, and 41 for UVPM, EPM, and solanesol, respectively. The UVPM and FPM factors are in good agreement with the recently published values. Whereas there might be a substantial difference in the solanesol content among cigarettes produced in different countries, the variability is somewhat greater than those of UVPM and FPM, Unfortunately, comparison of the PAH yield data from this study with literature values was complicated by a lack of consistency in cigarette smoke generating methodology. Validation of the PAH yields was also difficult due to a lack of information on the ETS related PAH in the literature. From and engineering viewpoint , however, these data on the cigarette yields of ETS components may still provide useful information to studies on the mathematical modeling of indoor air quality management regarding tobacco smoke as a source of interest, or to studies on the assessment of human exposure to ETS.

  • PDF

현장실험을 통한 학교교실의 벽체 차음성능 및 측로전달소음 조사 (Investigation of the sound insulation performance of walls and flanking noises in classrooms using field measurements)

  • 류다정;박찬재;한찬훈
    • 한국음향학회지
    • /
    • 제36권5호
    • /
    • pp.329-337
    • /
    • 2017
  • 미국과 영국에서는 교실의 적정한 음환경을 제공하기 위하여 잔향시간 및 배경소음에 대한 기준이 수립되어 있다. 또한 이를 실현하기 위한 건축계획방법 및 실내마감재 적용에 대한 가이드라인을 제시하고 있다. 그러나 대한민국의 경우 학교 교실의 배경소음 기준을 만족하기 위한 가이드라인이 부족할 뿐만 아니라 이에 기초가 되는 교실 벽체의 차음성능에 대한 실태조사가 부족한 실정이다. 본 연구에서는 학교 교실의 실내외 소음에 대한 차음성능을 조사하기 위하여 대한민국 청주시 소재 중학교 2개소의 외부벽체와 실간벽체의 구조를 조사하였다. 실내외 벽체의 차음성능 및 측로전달소음을 비교분석하기 위하여 투과손실, 가중 표준화 음압레벨차, 음향 감쇠 계수, 신호대잡음비 등을 측정하였다. 연구결과 실간벽체의 경우 건식벽으로 건립된 학교의 차음성능이 습식벽보다 높게 나타났으며, 특히 중고파수대역에서 높은 차음성능을 나타내었다. 외부벽체의 경우 각 학교 별로 차음성능을 비교하였을 때 단창을 이중으로 배치한 학교보다 복층유리를 사용한 학교의 성능이 더 높은 것으로 나타났다. 또한 측로전달소음의 경우 창문을 모두 개방하거나 복도 측 창문과 문을 연 경우 기준을 초과하는 것으로 나타나 내부 소음에 의해 학생이 음성전달에 방해를 받을 수 있음을 알 수 있었다.

담즙산염과의 고체분산체로부터 로바스타틴의 용출 및 십이지장 점막 투과 특성 (Dissolution and Duodenal Permeation Characteristics of Lovastatin from Bile Salt Solid Dispersions)

  • 전인구
    • Journal of Pharmaceutical Investigation
    • /
    • 제39권2호
    • /
    • pp.97-106
    • /
    • 2009
  • Although lovastatin (LS) is widely used in the treatment of hypercholesterolemia, its bioavailability is known to be around 5%. This study was aimed to increase the solubility and dissolution-permeation rates of LS using solid dispersions (SDs) with bile salts. The solubilities of LS in water, aqueous bile salt solutions and non-aqueous vehicles were determined, and effects of bile salts on the cellulose or duodenal permeation of LS from SDs were evaluated using a horizontal permeation system. SDs were prepared at various ratios of LS to carriers, such as sodium deoxycholate (SDC), sodium glycocholate (SGC) and/or 2-hydroxypropyl-$\beta$-cyclodextrin (HPCD). The addition of bile salts (25 mM) in water increased markedly the solubility of LS by the micellar solubilization. Some non-aqueous vehicles were effective in solubilizing LS. From differential scanning calorimetric studies, it was found that the crystallinity of LS in SDs disappeared, indicating a formation of amorphous state. The SDs showed markedly enhanced dissolution compared with those of their physical mixtures (PMs) and drug alone. In the dissolution-permeation studies using a cellulose membrane, the donor and receptor solutions were maintained as a sink condition using pH 7.0 phosphate buffer containing 0.05% sodium lauryl sulfate (SLS). The flux of LS alone was nearly same as that of LS-SDC-HPCD (1:3:6) PM. However, the flux of LS-SDC-HPCD (1:3:6) SD slightly increased compared with drug alone and PM, suggesting that entrapment of LS in micelles does not significantly hinder the permeation across cellulose membrane. In the dissolution-duodenal permeation studies using a LS-HPCD-SDC (1:3:6) SD, the addition of various bile salts in donor solutions (25 mM) enhanced the permeation of LS markedly, and the fluxes were found to be $0.69{\pm}0.41$, $0.87{\pm}0.51$, $0.84{\pm}0.46$, $0.47{\pm}0.17$ and $0.68{\pm}0.32{\mu}g/cm^2/hr$ for sodium cholate (SC), SDC, SGC, sodium taurodeoxycholate (STDC) and sodium taurocholate (STC), respectively. The stepwise increase of donor SGC concentration increased the flux dose-dependently. From the relationship of donor SGC concentration and flux, the concentration of SGC initiating the permeation across the duodenal mucosa was calculated to be 11.1 mM, which is nearly same as the critical micelle concentration (CMC, 11.6 mM) of SGC. However, with no addition of bile salts and below CMC, the permeation was very limited and irratic, indicating that LS itself is very poor permeable. Higher protions of bile salt in SD such as LS-SDC or LS-SGC (1 : 49 and 1 : 69) showed highly promoted fluxes. In conclusion, SD systems with bile salts, which may form their micelles in intestinal fluids, might be a promising means for providing enhanced dissolution and intestinal permeation of practically insoluble and non-absorbable LS.

흰쥐의 적출 정관 수축성에 대한 ${\gamma}$-Aminobutyric Acid의 억제작용 (Inhibitory Effects of ${\gamma}$-Aminobutyric Acid on the Contractility of Isolated Rat Vas Deferens)

  • 안기영;권오철;하정희;이광윤;김원준
    • Journal of Yeungnam Medical Science
    • /
    • 제9권2호
    • /
    • pp.382-395
    • /
    • 1992
  • GABA는 중추신경계의 대표적인 신경전달 물질로서 $GABA_A$수용체 또는 $GABA_B$수용체에 작용하여 진정 작용, 항 불안 작용, 및 근이완 작용을 하는 것으로 알려져 있다. 근래에는 말초조직에도 GABA가 존재하며 신경조정인자 혹은 신경전달인자로서 작용한다는 보고가 있다. 정관에 대한 자율신경 지배는 아드레날린성, 콜린성과 비콜린성 비아드레날린성 신경섬유들이 분포하고 있으나, 종 혹은 부위에 따라 이들 구성요소들의 수축성에 대한기여도가 다른 것으로 알려져 있다. 본 실험에서는 흰쥐의 전립선 부위 정관의 기본장력 및 전기장 유발 수축에 대한 교감 신경성, 부교감 신경성 및 퓨린성 효현제의 영향을 관찰하였으며, 정관의 흥분성 약물 및 전기장 유발 수축에 미치는 GABA 및 GABA 관련 약물의 영향을 관찰함으로서 정관의 수축운동에 대한 GABA의 작용기전을 규명해 보고자 흰쥐(Sprague-Dawley)의 전립선 부위 정관 절편을 적출 근편 실조에 현수하고, 등척성 장력을 측정하여 다음과 같은 결과를 얻었다. 1. GABA, muscimol 및 baclofen은 전기장자극(0.2 Hz, 1 msec, 80 V) 유발 수축을 농도 의존적으로 억제하였으며 그 효력은 GABA, baclofen 그리고 muscimol 순이었다. 2. GABA의 억제작용은 $GABA_B$ 수용체 길항제인 DAVA에 의하여 길항되었으나, $GABA_A$ 수용체 길항제인 bicuculline에 의해서는 길항되지 않았다. 3. Baclofen의 억제작용은 DAVA에 의하여 길항되었으나 muscimol의 억제작용은 bicuculline에 의해서는 길항되지 않았다. 4. Norepinephrine과 ATP는 농도 의존적으로 정관의 수축력을 증가 시켰으나 acetylcholine은 영향을 미치지 못하였다. 5. GABA, baclofen 및 muscimol은 정관의 기본 장력에는 영향을 미치지 않았으며, GABA는 norepinephrine과 ATP 유발 수축에는 영향을 주지 못하였다. 6. 적출 정관을 20초간 전기장 자극을 가하였을 때 ATP 수용체 탈감작제인 mATP를 전처치한 경우에는 FPC가 감소되었고, 신경원에서 catecholamine을 고갈시키는 reserpine을 전처치한 경우에는 STC가 감소되었다. 7. GABA는 mATP를 전처치한 군에서는 정관의 전기장 유발 수축에 영향을 주지 못하였으나, reserpine을 전처치한 군에서는 전기장 유발 수축을 억제하였다. 이상의 결과로 보아 흰쥐정관의 전립선 부위에는 아드레날린성 신경전달기전과 퓨린성 신경전달기전이 동시에 작용하고 있으며, GABA는 주로 신경원의 $GABA_B$ 수용체를 통하여 ATP의 유리를 억제하는 것으로 사료된다.

  • PDF