• 열처리공학회지
• /
• 제33권3호
• /
• pp.99-106
• /
• 2020

Selective laser melting (SLM) is an additive manufacturing process by melting metallic powders and stacking into layers, and can product complex shapes or near-net-shape (NNS) that are difficult to product by conventional processes. Also, SLM process is able to raise the efficiency of production by creating a streamlined manufacturing process. For manufacturing in SLM process using Ti-6Al-4V powder, analysis of microstructural evolution and evaluation of mechanical properties are essential because of rapid melting and solidification process of powders according to high laser power and rapid scan speed. In addition, it requires a post-processing because the soundness and mechanical properties are degraded by defects such as pore, un-melted powder, lack-of-fusion, etc. In this study, hot isostatic press (HIP) was conducted as a post-processing on SLM-printed Ti-6Al-4V alloy. Microstructure of post-processed Ti-6Al-4V alloy was compared to as-built Ti-6Al-4V, and the evolution of quasi-static (Vickers hardness, room temperature tensile characteristic) and dynamic (high-cycle fatigue characteristic) mechanical properties were analyzed.

• 정보보호학회논문지
• /
• 제31권6호
• /
• pp.1105-1114
• /
• 2021

최근 급상승한 암호 화폐의 인기로 인해 암호 화폐 채굴 악성코드인 크립토재킹 위협이 증가하고 있다. 특히 웹 기반 크립토재킹은 피해자가 웹 사이트에 접속만 하여도 피해자의 PC 자원을 사용해 암호 화폐를 채굴할 수 있으며 간단하게 채굴 스크립트만 추가하면 되기 때문에 공격이 쉽고 성능 열화와 고장의 원인이 된다. 크립토재킹은 피해자가 피해 상황을 인지하기 어렵기 때문에 크립토재킹을 효율적으로 탐지하고 차단할 수 있는 연구가 필요하다. 본 연구에서는 크립토재킹의 대표적인 감염 증상과 스크립트를 지표로 활용하여 효과적으로 크립토재킹을 탐지하는 프레임워크를 제안하고 평가한다. 제안한 크립토재킹 탐지 프레임워크에서 행위 기반 동적 분석 기법으로 컴퓨터 성능 지표를 학습한 K-Nearest Neighbors(KNN) 모델을 활용했고, 스크립트 유사도 기반 정적 분석 기법은 악성 스크립트 단어 빈도수를 학습한 K-means 모델을 크립토재킹 탐지에 활용했다. 실험 결과에 따르면 KNN 모델은 99.6%의 정확도를 보였고, K-means 모델은 정상 군집의 실루엣 계수가 0.61인 것을 확인하였다.

• 대한핵의학회지
• /
• 제21권2호
• /
• pp.191-197
• /
• 1987

39 patients with focal hepatic lesions were evaluated by $^{99m}Tc-RBC$ liver scan. The diagnosis of focal hepatic lesions were made by percutaneous needle biopsy, angiography, surgery, or clinical courses. Thses diagnoses included 24 cases of hemangioma, 7 hepatomas, 6 metastatic disease, 1 abscess, and 1 cyst. 19 hemangiomas showed focal hot activity on delayed static planar images. 3 small deep seated hemangiomas were diagnosed by SPECT that would have been missed by planar images alone. 2 large hemangiomas had no radioisotope uptake within the lesions on delayed images and at surgery cavernous hemangioma with thrombosis, calcification, and fibrosis were found. For hepatic hemangiomas in our series, the sensitivity was 91.7% and the specificity was 100%. The remaining 15 patients including hepatomas, metastatic lesions, cyst and abscess showed cold defect on delayed blood pool images. It is concluded that $^{99m}Tc-RBC$ liver scan should be the choice of primary diagnostic procecure for clinically suspected hepatic hemangioma since it's inexpensive, non-invasive, and readly available.

• Journal of Advanced Marine Engineering and Technology
• /
• 제8권1호
• /
• pp.85-99
• /
• 1984

The stability of the two-phase flow in a heated channel is of great importance in the design and operation of the boilers and light water nuclear reactors, because it can cause flow oscillations and lead to a violation of thermal limits with resultant overheating of the channels and cladding. This paper presents a systematic evaluation to the variation effects of the basic four (4) dimensionless parameters in a homogeneous equilibrium model. The flow stability is examined on the ground of static characteristic curves. The complicated transfer function of flow dynamics which gives consideration to the transport lag of density wave is derived, and the transient flow stability is analysed by applying the Nyquist stability criterion in control engineering. The analysis results summed up as follows 1. The coolant flow becomes stable in large friction number and specific flow, while it is unstabale in small friction number and flow. 2. Large phase-change number and Froude number destabilize the two-phase flow, but small numbers stabilize it. The effect to variation of phase-change number is more dominant compared with Froude number. 3. The dynamic analysis is required to hold the sufficient safety of heated channels since only static results does not keep it. The special attention could be payed in the design and operation of heat engines, because the unstaable region exists within the stable boundary at small and middle phase-change number and Froude number.

• 한국군사과학기술학회지
• /
• 제6권4호
• /
• pp.29-37
• /
• 2003

Using a wind tunnel testing, the aerodynamic load characteristics of an elliptic airfoil was described. The experimental data was obtained for angles of attack $-20^{\circ}$ to $+20^{\circ}$ with $2^{\circ}$ increments at a chord Reynolds number of $0.99{\times}105$ and $2.48{\times}105$. For each test case, chordwise suction pressure distributions and wake surveys were obtained. Static pressure measurements were made over a 10 sec averaging time at a 10 Hz sampling rate. For each case, wake survey was conducted with a pilot-static probe at 1.0c downstream from the trailing edge at very fine spacing to resolve the wake velocity deficit profile. As can be expected, suction pressure coefficient was increased with angle of attack. The normal force, CNmax, appeared peak value at the incidence angle of $12^{\circ}~14^{\circ}$, and the significant increase in profile drag at this range of angles of attack.

• Journal of Communications and Networks
• /
• 제2권1호
• /
• pp.46-57
• /
• 2000

Ongoing standardization effort on 3G cellular system in 3GPP (UNTS) is based on GPRS core network and promises a global standard for systems capable of offering ubiquitous access to internet for mobile users. Considered radio access systems(FDD CDMA, TDD CDMA, and EDGE) are optimized for robust mobile use. However, there are alternative relatively high-rate radio interfaces being standardized for WLAN (IEEE802.11 and HIPER-LAN/2) which are capable of delivering significantly higher data rates to static or semi-static terminals with much less overhead. Also WPANs(BLUETOOTH, IEEE802.15), which will be present in virtually every mobile handset in the near future, are offering low cast and considerable access data rate and thus are very attractive for interworking scenarios. The prospect of using these interfaces as alternative RANs inthe modular UMTS architecture is very promising. Additionally, the recent inclusion of M-IP in the UMTS R99 standard opens the way for IP-level interfacing to the core network. This article offers an overview into WLAN-Cellular interworking. A brief overview of GPRS, UMTS cellular architectures and relevant WLAN standards is given. Possible interworking architectures are presented.

• 한국강구조학회 논문집
• /
• 제19권1호
• /
• pp.99-106
• /
• 2007

이 논문은 일정체적 양단고정 기둥의 정 동적 최적형상에 관한 연구이다. 기둥의 단면은 정다각형이며, 단면깊이는 포물선으로 변화하는 변단면이다. 축방향 압축하중이 작용하는 기둥의 고유진동수 및 좌굴하중을 산정하는 수치해석 기법을 개발하였다. 그러한 기둥의 자유진동을 지배하는 미분방정식을 유도하고 Runge-Kutta법과 Regula-Falsi법을 이용하여 고유진동수를 산정하였다. 수치해석의 결과로부터 얻어진 하중-고유진동수 사이의 관계를 이용하여 기둥의 좌굴하중을 산정하였다. 기둥의 변수연구를 통하여 동적 안정영역, 동적 최적형상 및 최강기둥의 형상을 산출하였다.

• Structural Engineering and Mechanics
• /
• 제17권1호
• /
• pp.99-112
• /
• 2004

It is known that lap splices in the longitudinal reinforcement of reinforced concrete (RC) bridge columns are not desirable for seismic performance, but it is sometimes unavoidable. Lap splices were practically located in the potential plastic hinge region of most bridge columns that were constructed before the 1992 seismic design provisions of the Korea Bridge Design Specification. The objective of this research is to evaluate the seismic performance of reinforced concrete (RC) bridge piers with lap splicing of longitudinal reinforcement in the plastic hinge region, to develop an enhancement scheme for their seismic capacity by retrofitting with glassfiber sheets, and to assess a damage of bridge columns subjected to seismic loadings for the development of rational seismic design provisions in low or moderate seismicity region. Nine (9) test specimens with an aspect ratio of 4 were made with three confinement ratios and three types of lap splice. Quasi-static tests were conducted in a displacement-controlled way under three different axial loads. A significant reduction of displacement ductility was observed for test columns with lap splices of longitudinal reinforcements, whose displacement ductility could be greatly improved by externally wrapping with glassfiber sheets in the plastic hinge region. A damage of the limited ductile specimen was assessed to be relatively small.

• Geomechanics and Engineering
• /
• 제28권3호
• /
• pp.313-324
• /
• 2022

Rock properties are important in the design of mines and civil engineering excavations to prevent the imminent failure of slopes and collapse of underground excavations. However, the time, cost, and expertise required to perform experiments to determine those properties are high. Therefore, empirical models have been developed for estimating the mechanical properties of rock that are difficult to determine experimentally from properties that are less difficult to measure. However, the inherent variability in rock properties makes the accurate performance of the empirical models unrealistic and therefore necessitate the use of soft computing models. In this study, Gaussian process regression (GPR), artificial neural network (ANN) and response surface method (RSM) have been proposed to predict the static and dynamic rock properties from the P-wave and rock density. The outcome of the study showed that GPR produced more accurate results than the ANN and RSM models. GPR gave the correlation coefficient of above 99% for all the three properties predicted and RMSE of less than 5. The detailed sensitivity analysis is also conducted using the RSM and the P-wave velocity is found to be the most influencing parameter in the rock mechanical properties predictions. The proposed models can give reasonable predictions of important mechanical properties of sedimentary rock.

• Nuclear Engineering and Technology
• /
• 제54권5호
• /
• pp.1560-1569
• /
• 2022

Liquid fueled molten salt reactors (MSRs) have seen renewed interest because of their inherent safety features, higher thermal efficiency and potential for efficient thorium utilisation for power generation. Thorium fluoride is one of the salts used in liquid fueled MSRs employing Th-U cycle. In the present study, ThF₄ was prepared by hydro-fluorination of ThO₂ using anhydrous HF gas. Process parameters viz. bed depth, hydrofluorination time and hydrofluorination temperature, were optimized for the preparation of ThF₄ in a static bed reactor setup. The products were characterized with X-Ray diffraction and experimental conditions for complete conversion to ThF₄ were established which also corroborated with the yield values. Hydrofluorination of ThO₂ at 450 ℃ for half an hour at a bed depth of 6 mm gave the best result, with a yield of about 99.36% ThF₄. No unconverted oxide or any other impurity was observed. Rietveld refinement was performed on the XRD data of this ThF₄, and Chi2 value of 3.54 indicated good agreement between observed and calculated profiles.