• Korean Chemical Engineering Research
• /
• v.45 no.2
• /
• pp.149-154
• /
• 2007

Nanoimprint lithography (NIL) is useful technique because of its low cost and high throughput capability for the fabrication of sub-micrometer patterns which has potential applications in micro-optics, magnetic memory devices, bio sensors, and photonic crystals. Usually, a chemical surface treatment of the stamp is needed to ensure a clean release after imprinting and to protect the expensive original master against contamination. Meanwhile, adhesion promoter between resin and substrate is also important in the nanoscale pattern. In this work, we have investigated the effect of surface treatment using silane coupling agent as release layer and adhesion promoter for UV-Nanoimprint lithography. Uniform SAM (self-assembled monolayer) could be fabricated by vapor deposition method. Vapor phase process eliminates the use of organic solvents and greatly simplifies the handling of the sample. It was also proven that 3-acryloxypropyl methyl dichlorosilane (APMDS) could strongly improve the adhesion force between resin and substrate compared with common planarization layer such as DUV-30J or oxygen plasma treatment.

• Information Systems Review
• /
• v.14 no.1
• /
• pp.37-65
• /
• 2012

This research aims to design and analyze a ubiquitous customer relationship management system based on near field communication which can be applied to stores in off-line environment. The existing customer relationship management system has been used mainly for stores in off-line environment to issue a royalty card, to stamp a seal on the purchase goods, and to manage the history of customers' visits and purchases. But, the existing system has two weaknesses; it makes difficult for a store manger not only to acquire a wealth of customer data but also to systematically manage the acquired data. In particular, the effectiveness and efficiency of the royalty card are questioned when a customer makes purchases in the store in that the customer frequently does not carry it or loses it. So, this research suggests a ubiquitous customer relationship management system where a tag for near field communications is attached to a store in off-line environment; a store manager can collect and manage easily customer's dada and customers can seamlessly acquire store's information. To do this, this research conducts the followings. First, we review the previous researches of customer relationship management to examine the concept of ubiquitous customer relationship management. Second, from the examination, we draw the factors to be considered in ubiquitous customer relationship management system based on near field communication. Third, we propose a scenario where the suggested system is used. Fourth, we analyze the participants' values and the process that will be used for the suggested system. Finally, we discuss the possibility of the application of this system to real business environment from various viewpoints.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.27 no.4
• /
• pp.431-436
• /
• 2013

Bone homeostasis is maintained by co-ordination of bone-resorbing osteoclasts and bone-forming osteoblasts. Imbalance between osteoclasts and osteoblasts leads to many bone diseases such as osteoporosis, rheumatoid arthritis. Taxillus chinensis is a herb that has been widely used to improve bone health. However, the effect and mechanism of Taxillus chinensis extract on osteoclast differentiation and bone resportion has been unknown. Thus, We investigated the effect of Taxillus chinensis on expression of receptor activator of nuclear factor-${\kappa}B$ ligand (RANKL)-induced osteoclast differentiation and bone resorption. Also, the action of Taxillus chinensis on mechanisms relating to osteoclast differentiation was studied. In this results, we identified that Taxillus chinensis significantly inhibited RANKL-induced osteoclast differentiation and bone resportion. Moreover, Taxillus chinensis was suppressed the activation of NF-${\kappa}B$ in bone marrow macrophage treated RANKL and M-CSF. Taxillus chinensis was down-regulated the mRNA expression of c-Fos, nuclear factor of activated T-cells (NFAT)c1, osteoclast-associated receptor (OSCAR), tartrate-resistant acid phosphatase (TRAP). The cell adhesion-related molecules such as integrin ${\alpha}v$ and integrin ${\beta}3$, and the filamentous actin (F-actin) rings of mature osteoclasts-related molecules such as dendritic cell-specific transmembrane preotein (DC-STAMP) and cathepsin K are also suppressed. Taken together, these results indicated that Taxillus chinensis will be a good candidate to treat osteoclast-mediated bone diseases.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.12
• /
• pp.7292-7301
• /
• 2014

With the development of IT Info-Communications technology, the vehicle with a combination of wireless-communication technology has resulted in significant research into the convergence of the component of existing traffic with information, electronics and communication technology. Intelligent Vehicle Communication is a Machine-to-Machine (M2M) concept of the Vehicle-to-Vehicle. The Vehicle-to-Infrastructure communication consists of safety and the ease of transportation. Security technologies must precede the effective Intelligent Vehicle Communication Structure, unlike the existing internet environment, where high-speed vehicle communication is with the security threats of a wireless communication environment and can receive unusual vehicle messages. In this paper, the Vehicle Identification number between the V2I and the secure message communication protocol was proposed using hash functions and a time stamp, and the validity of the vehicle was assessed. The proposed system was the performance evaluation section compared to the conventional technique at a rate VPKI aspect showed an approximate 44% reduction. The safety, including authentication, confidentiality, and privacy threats, were analyzed.

• The Journal of Information Systems
• /
• v.24 no.3
• /
• pp.133-154
• /
• 2015

Purpose This study re-analyzes Jung 2012's data using the time interval based analysis to examine if the process of idea generation is in good currency throughout the ideation sessions. In this way, the relationship between extraversion-introversion personality trait and ideation performance in the context of computer-mediated idea generation can be better understood. Design/methodology/approach A $2{\times}4$ factorial design was used, crossing personality differences (extraversion and introversion) with the degree of stimuli (0, 20, 40, and 80 high-quality ideas). Participants were randomly assigned to one of eight treatment conditions. The group simulator is used to measure individual level performance. The number of unique ideas generated by individuals and the exact time stamp when each idea was submitted were analyzed to compare performances. Findings The results show that introverts' performances significantly drops after about the middle stage of the ideation session, whereas extraverts do not seem to feel time constraints throughout the ideation session, resulting in superior divergent thinking, which is a major key to understand creative productivity in the problem-solving process. Since extraverts tend to yield a larger pool of ideas, another interpretation is that group composition with extraverts compared with introverts may create a logically larger group, which is important to improve the performance of idea generation group.

• Journal of Korean society of Dental Hygiene
• /
• v.9 no.3
• /
• pp.468-478
• /
• 2009

This research was performed to provide basic data for the development of infection related dental hygiene studies by surveying the current condition of recognition among students in the department of dental hygiene toward hospital infection management while receiving the following results by using a personal self-administered survey method targeting 303 students in the department of dental hygiene from certain areas. 1. With the current condition of recognition on the sanitization and sterilization of instruments among students in the department of dental hygiene(study), the rate at which surgical instruments are to be sterilized with autoclaves was 79.9% which was relatively higher than other instruments while it was shown that prosthetic instruments for treatment was 56.4%, conservative instruments for treatment was 51.8%, and ultrasonic scaler tip was 51.1% while the way syringe tips(36.1%) and the dental anesthetic apparatus(27.9%) were revealed to require sanitization by alcohol. 2. The 'hand wash' area was the highest with 4.71 while the 'materials and environment management' area and 'equipment management' area appeared high respectively with 4.43 and 4.41. 3. With the current condition of recognition on equipment management, 'equipments used for contagious patients are separately washed after a one-time use and must be sterilized or separated-and-discarded' was the highest with 4.82 while 'sterilization equipments with humidity or water on it are considered contaminated and are not used' showed the lowest recognition level with 3.90. 4. Regarding the current condition of materials and environment management, 'contagious and general trash are separated and discarded' was the highest with 4.70 while 'the refrigerator for medicine storage is cleaned on a regular basis once a month' was revealed as the lowest with 4.11. 5. With the current condition of recognition on hand washing, 'one must wash their hands after coming in contact with contagious patients, was the highest with 4.90 while washing hands after taking off gloves' appeared as the lowest with 4.51 point. To conclude department of dental hygiene there is to infection management and necessary about organization disinfecting and pasteurization to strengthen an education in order raising a stamp helping practical ratio about the infection management which whole, is from presence at a sickbed and connection does and about the infection management which is substantial and educational program development leads feed with the fact that deepening studying which is continuous must become accomplished becomes.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.4
• /
• pp.1863-1870
• /
• 2013

The purpose of this study is when the cases will be found, used as a basic data for clinical severity prediction, and research on suicide prevention. By classifying the group of survival and death about the patients who visit the Emergency Medical Center by attempt suicide by drug addiction, identifying the condition when visiting and results of the treatment after visiting. From June 2009 to May 2011, last two years data that among the drug abusers who visited the Emergency Medical Center in C-University Hospital in Gwang-Ju, only suicidal patients, except with unintentional accidents were collected. The findings, among the drug addiction patients who high age, lower level of education and living alone were the mortality rate was higher. And if who drunk the agricultural chemicals, the convalescence was not good. If the causes of suicide were economic problems and depression, the mortality rate was higher. And when visit hospital, if the consciousness was stupor and semi-coma/coma, the convalescence was not good. As grasp the risk for suicide patients of drug addiction, help on the Prediction of clinical severity, also stamp the appropriate drug education with psychological support is more important on them.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.4
• /
• pp.43-51
• /
• 2016

Preventing the forgery and alteration of test reports is important, in order to maintain the reliability of military supplies. Based on a survey of reports on testing institutions and a case study of established electronic document systems in the public sector, we propose a system architecture, which helps prevent the forgery and alteration of test reports with legal force. The proposed architecture takes advantage of both the time stamp that records the time a document is received and a server synchronized with the testing institution. Using the proposed system architecture, the user is able to request a test and receive reports from the testing institution without delay. Also, a defense agency is able to conveniently prove the authenticity of the test reports and utilize the statistical data collected by the architecture. Therefore, we expect that the proposed system architecture will help defense agencies to prevent the forgery and alteration of test reports and ensure their reliability and quality.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.4
• /
• pp.153-163
• /
• 2017

This research is based on the previous research that personally preferred safe distance, rotating angle and speed are differentiated. Thus, we use machine learning model for recognizing maneuvering modes trained per personal or per similar driving pattern groups, and we evaluate automatic driving according to maneuvering modes. By utilizing driving knowledge, we subdivided 8 kinds of longitudinal modes and 4 kinds of lateral modes, and by combining the longitudinal and lateral modes, we build 21 kinds of maneuvering modes. we train the labeled data set per time stamp through RNN, LSTM and Bi-LSTM models by the trips of drivers, which are supervised deep learning models, and evaluate the maneuvering modes of automatic driving for the test data set. The evaluation dataset is aggregated of living trips of 3,000 populations by VTTI in USA for 3 years and we use 1500 trips of 22 people and training, validation and test dataset ratio is 80%, 10% and 10%, respectively. For recognizing longitudinal 8 kinds of maneuvering modes, RNN achieves better accuracy compared to LSTM, Bi-LSTM. However, Bi-LSTM improves the accuracy in recognizing 21 kinds of longitudinal and lateral maneuvering modes in comparison with RNN and LSTM as 1.54% and 0.47%, respectively.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.6
• /
• pp.1385-1391
• /
• 2012

The authenticity of a document is recognized only when sealing on the document can be recognized to be the same as the original seal of a person who drew up the document. But forge in various ways is prevalent; forge through stamp-copy, forge through photocopying, forge through computer seal sculpture machine, forge through photosensitive resin, etc. Among the methods above, a method of making a forged seal with photosensitive resin panels, which is one of the easiest forging methods, enables making a forged seal the same as the original seal through the work of projecting ultraviolet rays on a resin panel on which negative film is stuck after making it using the original seal. But as research into this reality has not been sufficiently carried on, it is difficult to identify forged sealing through photosensitive resin seals, indeed. For this reason, unless regulations about making forged seals using resin machine for print are enforced, crimes related to forged seals using photosensitive resin are expected to increase in the future. Thus, after stamping 10 resin seals made based on an original seal carved of thick and thin strokes of characters, this paper intends to clarify that there are differences between original sealing and forged sealing through sealing identification method. Consequently, we verified the significant difference in the statistics between original sealing and forged sealing.