• 제목/요약/키워드: SSF

검색결과 166건 처리시간 0.026초

다물체 동역학 시뮬레이션을 통한 버스의 전복 시험 규정과 안전성 평가에 관한 고찰 (Review of Regulation for Rollover Test and Evaluation of Safety for Buses by using Simulation of Multi-body Dynamics)

  • 박승운;최요한;이철희
    • 드라이브 ㆍ 컨트롤
    • /
    • 제19권3호
    • /
    • pp.39-46
    • /
    • 2022
  • In South Korea, to evaluate the rollover safety of domestic vehicles, the maximum slope angle of the vehicle is specified, which is verified by the rollover safety test of driving vehicles. However, the domestic rollover safety test is not suitable for buses, because the small amount of static stability factor (SSF) will invalidate the rollover experimental equation due to the high center of mass position of buses. To solve the above problems, a dynamic model of the bus is prepared with assumptions of mass and suspension spring properties. Subsequently, the maximum slope angle of the model was computed by using the simulation of multi-body dynamics, and the result was compared with actual test results to validate the dynamics model. Also, the rollover Fishhook (roll stability) test was conducted in the simulation for driving model. During the simulation, roll angle and roll rate were calculated to check if a rollover occurred. Through the rollover simulation of buses, the domestically regulated formula for rollover safety and the procedure of rollover test for driving vehicles are evaluated. The conclusion is that the present regulation of rollover test should be reconsidered for buses to ensure to get the valid results for rollover safety.

Effect of Solid-State Fermented Brown Rice Extracts on 3T3-L1 Adipocyte Differentiation

  • Su Bin Ji;Chae Hun Ra
    • Journal of Microbiology and Biotechnology
    • /
    • 제33권7호
    • /
    • pp.926-933
    • /
    • 2023
  • Aspergillus oryzae KCCM 11372 was used to enhance the production of β-glucan using humidity control strategies. Under conditions of 60% humidity, solid-state fermentation (SSF) increased the yields of enzymes (amylase and protease), fungal biomass (ergosterol), and β-glucan. The maximum concentrations obtained were 14800.58 U/g at 72 h, 1068.14 U/g at 120 h, 1.42 mg/g at 72 h, and 12.0% (w/w) at 72 h, respectively. Moreover, the β-glucan containing fermented brown rice (β-glucan-FBR) extracts at concentrations of 25-300 ㎍/ml was considered noncytotoxic to 3T3-L1 preadipocytes. We then studied the inhibitory effects of the extracts on fat droplet formation in 3T3-L1 cells. As a result, 300 ㎍/ml of β-glucan-FBR extracts showed a high inhibition of 38.88% in lipid accumulation. Further, these extracts inhibited adipogenesis in the 3T3-L1 adipocytes by decreasing the expression of C/EBPα, PPARγ, aP2, and GLUT4 genes.

열응력을 받은 하이브리드 섬유보강 시멘트 복합체의 내충격성능 평가 (Evaluation of Impact Resistance of Hybrid Fiber Reinforced Cementitious Composites Subjected to Thermal Stress)

  • 한승현;김규용;이예찬;유하민;박준영;남정수
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2023년도 봄 학술논문 발표대회
    • /
    • pp.145-146
    • /
    • 2023
  • In this study, the effect of hybrid fiber reinforcement on the residual strength and impact resistance of high-strength cementitious composites exposed to high temperatures was investigated. A cementitious composites was manufactured in which 0.15 vol% of polypropylene fiber (PP) and 1.0 vol% of smooth steel fiber (SSF) were double-mixed, and a residual strength test was conducted while thermal stress was applied by heating test, and then a high-velocity impact test was performed. In the case of general cementitious composites, the rear surface is damaged due to explosion and low tensile strength during high temperature or impact, while hybrid fiber reinforced cementitious composites can repeatedly absorb and distribute stress until multiple fibers are damaged to suppress the propagation of impact and resistance to explosion. Therefore, this study analyzed the residual strength of cementitious composites exposed to high temperatures depending on whether hybrid fibers were mixed or not, and collected research data on fracture behavior through high-speed impact tests to evaluate impact resistance and mechanical properties.

  • PDF

헛개열매 간장의 알코올 분해 활성 및 관능적 품질 특성 (Alcohol Dehydrogenase Activity and Sensory Evaluation of Hutgae (Hovenia dulcis Thunb) Fruit Soy Sauce)

  • 정수영;임정섭;송희순
    • 한국식품영양학회지
    • /
    • 제25권4호
    • /
    • pp.747-754
    • /
    • 2012
  • The objective of this study was to investigate free amino acid composition, antioxidant activity, alcohol dehydrogenase activity and the sensory quality attributes for the development of functional soy sauce using Hutgae (Hovenia dulcis Thunb) fruit, which is well-known for improving liver function and alleviating various negative physiological effects following heavy consumption of alcoholic beverages. Soy sauces adding six types of extract from Hutgae fruit (HF) were prepared (SSH1: HF 20%, SSH2: HF 10%, SSH3: HF 20%/40 days NaCl extract, SSH4: HF 20%/20 days NaCl extract, SSH5: HF 20% water bath extract, SSH6: freeze-drying powder from HF 20% aqueous extract), compared with soy sauce using the conventional method. These soy sauces were used for determining alcohol dehydrogenase activity by NADH absorbance, the antioxidant effect by 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activity and sensory evaluation by sensory scaling. Total free amino acid contents for most samples were in the range of 327.3 to 375.5 mg%, and then, aspartic acid and glutamic acid content of SSH1 and SSH5 were higher than that of others. DPPH radical scavenging activity was shown to be the highest in SSH4, also SSH1, SSH5 and SSF6 were shown to be higher than the control group. Alcohol dehydrogenase activity was shown to be the highest in SSH5. In sensory evaluation, the highest intensity of roast smell was observed in SSH4 while sweet taste was shown to be the highest in SSH5, and SSH3 and SSH5 revealed higher overall acceptability. From these results, Hutgae fruit soy sauces demonstrated antioxidant activity and alcohol dehydrogenase activity. In conclusion, soy sauces containing the water bath extract of Hutgae fruit may be used as a functional seasoning.

경량화 소재의 반용융 및 주조/단조기술 (Semi-Solid Forming, Casting and Forging Technologies of Lightweight Materials)

  • 강충길;최재찬;배원병
    • 한국정밀공학회지
    • /
    • 제17권4호
    • /
    • pp.7-21
    • /
    • 2000
  • This paper describes an overview of the thixoforming and thixomolding processes. Semi-solid metalworking (SSM), which is called the thixoforming process of aluminium materials, incorporates the elements of both casting and for the manufacture of near net shape parts. The SSM has some advantages such as net shape or near net shape manufacturing, the ability to form thin walls, excellent surface finish, tight tolerance, and excellent dimensional precision. The thixomolding process of Mg alloy (AZ9l) is a combination of two technologies both conventional die casting and plastic injection molding. The feed material used is a machined chip with a geometry of approximately 1 mm square and a length of 2~3 mm. The semi-solid forming (SSF) of high quality aluminium and magnesium parts will be established in the automotive and electronic industry, in the future. The hybrid method of casting/forging has been caused attention. This process uses a preformed material made by casting instead of the wrought material and finishes it by a single forging process. This process is expected to lower costs without sacrificing the mechanical and finishes it by a single forging process. The process is expected to lower costs without sacrificing the mechanical properties. The authors, intending that the casting/forging process contributes to a reduction in production cost of aluminum automotive parts in Korea, describes the feature of the casting/forging process, aluminum alloys suitable for the cast preform, microstructure and mechanical properties of the cast preform, application examples of cast/forging, and further study.

  • PDF

SSFNet을 이용한 대규모 네트워크상에서의 보안 시뮬레이션을 위한 방화벽과 IPS모듈의 모델링 및 구현 (Modeling and Implementation of Firewall and IPS for Security Simulation on Large-scale Network Using SSFNet)

  • 김용탁;권오준;김태석
    • 한국멀티미디어학회논문지
    • /
    • 제9권8호
    • /
    • pp.1037-1044
    • /
    • 2006
  • 실제 대규모 네트워크에서 사이버 공격으로 인한 보안시스템의 성능을 검증하기는 어렵다. 일반적으로 새로운 보안시스템이나 공격기법은 시뮬레이션을 통해 검증을 한다. 본 논문에서는 보안시스템 및 공격기법을 시뮬레이션 하기 위해 SSFNet을 사용하였다. SSFNet은 프로세스 기반 사건 중심 시뮬레이션 시스템이면서, 대규모 네트워크를 쉽게 표현할 수 있는 장점을 가지고 있다. 하지만 보안시스템이나 패킷을 조작할 수 있는 API를 제공하고 있지 않다. 본 논문에서는 보안 시스템으로 주로 사용하고 있는 방화벽과 IPS 클래스를 개발하여 SSFNet 구성요소로 추가하였다. 방화벽은 패킷 필터링 기반 보안 방화벽 시스템을 모델링하였다. IPS는 탐지 기능과 이상 패킷에 대한 드롭 기능을 가지고 있다. 확장된 SSFNet내에 네트워크를 모델링하여 방화벽과 IPS의 기능을 검증하였다. 방화벽은 패킷의 주소와 포트의 규칙을 통해 패킷을 차단하였다. 그리고 라우터에 기술된 IPS의 로그화면을 통해 패킷의 상태와 이상 패킷이 차단되는 것을 확인하였다.

  • PDF

Trichoderma harzianum FJ1의 고체상태배양에 의한 섬유소분해효소의 생산 (Production of Cellulolytic Enzymes by Trichoderma harzianum FJ1 in Solid State Fermentation.)

  • 유승수;김경철;김성준
    • 한국미생물·생명공학회지
    • /
    • 제31권3호
    • /
    • pp.257-263
    • /
    • 2003
  • 고체상태배양에서 섬유소분해효소의 고 생산을 위해 기질로서 다양한 섬유순폐기물을 검토한 결과, 주정박과 볏짚을 1:1의 혼합기질로 사용하였을 때 13.98 FPA를 얻었다. 효소생산을 높이기 위해 주정박과 볏짚의 혼합기질에 질소원으로서 콩비지를 1:1:1로 혼합하였을 때 15.22 FPA의 효소활성을 얻을 수 있었다. 이때의 최적의 함수율, pH, 온도는 각각 70%, 5.0, 3$0^{\circ}C$이었다. 최적배양조건에서 배양 5일째 FPA, CMCase, Xylanase, $\beta$-glucosidase 및 Avicelase의 효소활성은 각각 15.22, 69.1, 83.9, 29.2 및 4.2 unit/g-SDW이었다. T. harzianum FJI의 섬유소폐기물을 이용한 고체상 태배양의 경제적인 효소생산은 섬유소폐기물의 생물학적 당화기술에 크게 기여할 것이다.

갈조류 미역(Undaria pinnatifida)의 분리당화발효와 다양한 효모를 이용한 바이오에탄올의 생산 (Bioethanol Production from Seaweed Undaria pinnatifida Using Various Yeasts by Separate Hydrolysis and Fermentation (SHF))

  • 웬트룽 하우;라채훈;박미라;정귀택;김성구
    • 한국미생물·생명공학회지
    • /
    • 제44권4호
    • /
    • pp.529-534
    • /
    • 2016
  • 해조류 중 갈조류인 미역으로부터 분리당화발효(SHF)를 위한 전처리 및 효소당화를 검토하고, 기존의 분리당화발효(SHF)를 개선하기 위해 공배양발효(co-culture)를 수행하였다. 비순치 효모와 고농도 mannitol에 순치(adaptive evolution)한 효모를 이용한 공배양발효를 실시한 결과 발효 72시간에 12.2 g/l의 에탄올과 에탄올 수율($Y_{EtOH}$) 0.41을 나타내었다. 이러한 기존의 분리당화발효(SHF)를 개선한 공배양발효를 통해 에탄올 생산 수율이 0.23에서 0.41로 35.2% 증가하였으며, 에탄올 발효시간도 108시간에서 72시간으로 33.3% 감소하였다. 이러한 연구결과는 해양 바이오매스인 해조류로부터 바이오연료 생산과정에 있어 유용한 정보를 제공하는 것으로 판단된다.

Sewage Treatment Using Natural Systems and Effluent Reuse for Crop Irrigation in Small Communities

  • Ham, Jong-Hwa;Yoon, Chun-G.;Jeon, Ji-Hong;Hwang, Ha-Sun
    • 한국농공학회지
    • /
    • 제45권7호
    • /
    • pp.70-82
    • /
    • 2003
  • A pilot study was performed from July 1998 to December 2002, including winter performance, to examine seasonal performance of a constructed wetland and subsequent pond system for treatment of sewage in small communities of Korea. Pond was operated as a intermittent-discharge pond during winter period, and continuous flow system during growing season; its effects was evaluated from December 2001 to April 2003. The subsurface flow (SSF) wetland was satisfactory for treating sewage with good removal efficiency even during the winter period. The wetland effluent concentrations of $BOD_5$ and TSS were often higher in winter than in the growing season, but this was explained by the higher loading rates, rather than lower removal efficiency. The relatively poor-quality wetland effluent was further polished during winter in the pond. The upper layer of the pond water column became remarkably clear immediately after ice melt. In the growing season, ponds could be operated as a continuous flow system to remove nutrients and pathogens, and the effluent of pond could be reused as a supplemental irrigation water without risk of infection by sewage-borne pathogens as well as causing adverse effect on growth and yield. Overall, the wetland system was found to be adequate for treating sewage with stable removal efficiency, and the intermittent-discharge pond was found to be effective for further polishing if necessary. Therefore, the combination of a wetland and subsequent pond system and reuse of effluent as crop irrigation water is recommended as a practical alternative to treat sewage in Korean small communities, and partial discharge of pond water in March is suggested.

여러 가지 가중행렬을 가진 공간 시계열 모형들의 예측 (Prediction for spatial time series models with several weight matrices)

  • 이성덕;주수인;이소현
    • Journal of the Korean Data and Information Science Society
    • /
    • 제28권1호
    • /
    • pp.11-20
    • /
    • 2017
  • 시간의 변화뿐만 아니라 공간 위치의 변화를 함께 고려한 자료를 공간 시계열 자료라고 한다. 공간 시계열 자기회귀 이동평균 모형과 공간 시계열 중선형 모형에 대해 소개하고 각각의 Kalman Filter 방법에 의한 모수 추정의 과정을 거쳐 최종 선택된 모형의 예측력을 비교하였다. 또한 공간 시계열 자료의 모형에 포함되는 가중행렬에 대하여 기존의 방법인 동일한 가중치와 더불어 거리에 비례한 가중치와 인구수에 비례한 가중치를 제안하였다. 실증분석을 위해 한국질병관리본부에서 수집한 유행성 이하 선염 자료를 활용하여 가중치를 달리한 공간 시계열 모형을 적합시키고 예측하였다. 예측 오차 제곱합을 활용하여 어느 모형이 가장 효과적인 모형인지 판정하였다.