• Journal of Drive and Control
• /
• v.19 no.3
• /
• pp.39-46
• /
• 2022

In South Korea, to evaluate the rollover safety of domestic vehicles, the maximum slope angle of the vehicle is specified, which is verified by the rollover safety test of driving vehicles. However, the domestic rollover safety test is not suitable for buses, because the small amount of static stability factor (SSF) will invalidate the rollover experimental equation due to the high center of mass position of buses. To solve the above problems, a dynamic model of the bus is prepared with assumptions of mass and suspension spring properties. Subsequently, the maximum slope angle of the model was computed by using the simulation of multi-body dynamics, and the result was compared with actual test results to validate the dynamics model. Also, the rollover Fishhook (roll stability) test was conducted in the simulation for driving model. During the simulation, roll angle and roll rate were calculated to check if a rollover occurred. Through the rollover simulation of buses, the domestically regulated formula for rollover safety and the procedure of rollover test for driving vehicles are evaluated. The conclusion is that the present regulation of rollover test should be reconsidered for buses to ensure to get the valid results for rollover safety.

• Journal of Microbiology and Biotechnology
• /
• v.33 no.7
• /
• pp.926-933
• /
• 2023

Aspergillus oryzae KCCM 11372 was used to enhance the production of β-glucan using humidity control strategies. Under conditions of 60% humidity, solid-state fermentation (SSF) increased the yields of enzymes (amylase and protease), fungal biomass (ergosterol), and β-glucan. The maximum concentrations obtained were 14800.58 U/g at 72 h, 1068.14 U/g at 120 h, 1.42 mg/g at 72 h, and 12.0% (w/w) at 72 h, respectively. Moreover, the β-glucan containing fermented brown rice (β-glucan-FBR) extracts at concentrations of 25-300 ㎍/ml was considered noncytotoxic to 3T3-L1 preadipocytes. We then studied the inhibitory effects of the extracts on fat droplet formation in 3T3-L1 cells. As a result, 300 ㎍/ml of β-glucan-FBR extracts showed a high inhibition of 38.88% in lipid accumulation. Further, these extracts inhibited adipogenesis in the 3T3-L1 adipocytes by decreasing the expression of C/EBPα, PPARγ, aP2, and GLUT4 genes.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.145-146
• /
• 2023

In this study, the effect of hybrid fiber reinforcement on the residual strength and impact resistance of high-strength cementitious composites exposed to high temperatures was investigated. A cementitious composites was manufactured in which 0.15 vol% of polypropylene fiber (PP) and 1.0 vol% of smooth steel fiber (SSF) were double-mixed, and a residual strength test was conducted while thermal stress was applied by heating test, and then a high-velocity impact test was performed. In the case of general cementitious composites, the rear surface is damaged due to explosion and low tensile strength during high temperature or impact, while hybrid fiber reinforced cementitious composites can repeatedly absorb and distribute stress until multiple fibers are damaged to suppress the propagation of impact and resistance to explosion. Therefore, this study analyzed the residual strength of cementitious composites exposed to high temperatures depending on whether hybrid fibers were mixed or not, and collected research data on fracture behavior through high-speed impact tests to evaluate impact resistance and mechanical properties.

• The Korean Journal of Food And Nutrition
• /
• v.25 no.4
• /
• pp.747-754
• /
• 2012

The objective of this study was to investigate free amino acid composition, antioxidant activity, alcohol dehydrogenase activity and the sensory quality attributes for the development of functional soy sauce using Hutgae (Hovenia dulcis Thunb) fruit, which is well-known for improving liver function and alleviating various negative physiological effects following heavy consumption of alcoholic beverages. Soy sauces adding six types of extract from Hutgae fruit (HF) were prepared (SSH1: HF 20%, SSH2: HF 10%, SSH3: HF 20%/40 days NaCl extract, SSH4: HF 20%/20 days NaCl extract, SSH5: HF 20% water bath extract, SSH6: freeze-drying powder from HF 20% aqueous extract), compared with soy sauce using the conventional method. These soy sauces were used for determining alcohol dehydrogenase activity by NADH absorbance, the antioxidant effect by 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activity and sensory evaluation by sensory scaling. Total free amino acid contents for most samples were in the range of 327.3 to 375.5 mg%, and then, aspartic acid and glutamic acid content of SSH1 and SSH5 were higher than that of others. DPPH radical scavenging activity was shown to be the highest in SSH4, also SSH1, SSH5 and SSF6 were shown to be higher than the control group. Alcohol dehydrogenase activity was shown to be the highest in SSH5. In sensory evaluation, the highest intensity of roast smell was observed in SSH4 while sweet taste was shown to be the highest in SSH5, and SSH3 and SSH5 revealed higher overall acceptability. From these results, Hutgae fruit soy sauces demonstrated antioxidant activity and alcohol dehydrogenase activity. In conclusion, soy sauces containing the water bath extract of Hutgae fruit may be used as a functional seasoning.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.4
• /
• pp.7-21
• /
• 2000

This paper describes an overview of the thixoforming and thixomolding processes. Semi-solid metalworking (SSM), which is called the thixoforming process of aluminium materials, incorporates the elements of both casting and for the manufacture of near net shape parts. The SSM has some advantages such as net shape or near net shape manufacturing, the ability to form thin walls, excellent surface finish, tight tolerance, and excellent dimensional precision. The thixomolding process of Mg alloy (AZ9l) is a combination of two technologies both conventional die casting and plastic injection molding. The feed material used is a machined chip with a geometry of approximately 1 mm square and a length of 2~3 mm. The semi-solid forming (SSF) of high quality aluminium and magnesium parts will be established in the automotive and electronic industry, in the future. The hybrid method of casting/forging has been caused attention. This process uses a preformed material made by casting instead of the wrought material and finishes it by a single forging process. This process is expected to lower costs without sacrificing the mechanical and finishes it by a single forging process. The process is expected to lower costs without sacrificing the mechanical properties. The authors, intending that the casting/forging process contributes to a reduction in production cost of aluminum automotive parts in Korea, describes the feature of the casting/forging process, aluminum alloys suitable for the cast preform, microstructure and mechanical properties of the cast preform, application examples of cast/forging, and further study.

• Journal of Korea Multimedia Society
• /
• v.9 no.8
• /
• pp.1037-1044
• /
• 2006

It's difficult to check cyber attacks and the performance of a security system in a real large-scale network. Generally, a new security system or the effect of a new security attack are checked by simulation. We use SSFNet to simulate our security system and cyber attack. SSFNet is an event-driven simulation tools based on process, which has a strength to be capable of expressing a large-scale network. But it doesn't offer any API's which can manipulate not only the related function of security but also the packet. In this paper, we developed a firewall and IPS class, used for a security system, and added to them components of SSFNet. The firewall is modelled a security system based on packet filtering. We checked the function of the firewall and the IPS with network modelled as using our SSFNet. The firewall blocks packets through rules of an address and port of packets. The result of this simulation shows that we can check a status of packets through a log screen of IPS installed in a router and confirm abnormal packet to be dropped.

• Microbiology and Biotechnology Letters
• /
• v.31 no.3
• /
• pp.257-263
• /
• 2003

The cellulases production in solid state fermentation (SSF) of Trichoderma harzianum FJ1 with high cellulases productivity using cellulosic wastes was investigated. Physical and chemical conditions of the fermentation, such as moisture content, initial pH, and composition of mixed substrate (wine waste, rice straw, and soybean flour) on FPase (Filter paper activity) production were examined. The enzyme production was optimized in the conditions of moisture content of 70%, pH 5.0, 3$0^{\circ}C$, and 1:1:1 composition of mixed substrate containing wine waste, rice straw, and soybean flour. The highest activities of FPA, CMCase, Xylanase, $\beta$-glucosidase, and Avicelase in the optimized culture conditions were 15.2, 69.1, 83.9, 29.2, and 4.2 unit/g-SDW in 5 day cultivation, respectively. Economical and efficient production of cellulolytic enzymes by T harzianum FJ1 using cellulosic wastes in solid state fermentation will contribute to the biological saccharification of cellulosic wastes with enormous potential resource value in future.

• Microbiology and Biotechnology Letters
• /
• v.44 no.4
• /
• pp.529-534
• /
• 2016

Bioethanol was produced using the separate hydrolysis and fermentation (SHF) method with macroalgal polysaccharides from the seaweed, Undaria pinnatifida as biomass. This study focused on the pretreatment, enzymatic saccharification, and fermentation of yeasts in co-culture. Ethanol fermentation with 14.5% (w/v) seaweed hydrolysate was performed using the yeasts, Saccharomyces cerevisiae KCTC 1126 alone, Pichia angophorae KCTC 17574 alone, and their co-cultures with the yeasts either adapted to mannitol or not. Among the combinations, the co-culture of non-adapted S. cerevisiae and P. angophorae adapted to mannitol showed high bioethanol production of 12.2 g/l and an ethanol yield ($Y_{EtOH}$) of 0.41. Co-culture in the SSF process was employed in this study, to increase the ethanol yields of 35.2% and reduction of 33.3% in fermentation time. These results provide suitable information on ethanol fermentation with marine seaweeds for bioenergy production.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.45 no.7
• /
• pp.70-82
• /
• 2003

A pilot study was performed from July 1998 to December 2002, including winter performance, to examine seasonal performance of a constructed wetland and subsequent pond system for treatment of sewage in small communities of Korea. Pond was operated as a intermittent-discharge pond during winter period, and continuous flow system during growing season; its effects was evaluated from December 2001 to April 2003. The subsurface flow (SSF) wetland was satisfactory for treating sewage with good removal efficiency even during the winter period. The wetland effluent concentrations of $BOD_5$ and TSS were often higher in winter than in the growing season, but this was explained by the higher loading rates, rather than lower removal efficiency. The relatively poor-quality wetland effluent was further polished during winter in the pond. The upper layer of the pond water column became remarkably clear immediately after ice melt. In the growing season, ponds could be operated as a continuous flow system to remove nutrients and pathogens, and the effluent of pond could be reused as a supplemental irrigation water without risk of infection by sewage-borne pathogens as well as causing adverse effect on growth and yield. Overall, the wetland system was found to be adequate for treating sewage with stable removal efficiency, and the intermittent-discharge pond was found to be effective for further polishing if necessary. Therefore, the combination of a wetland and subsequent pond system and reuse of effluent as crop irrigation water is recommended as a practical alternative to treat sewage in Korean small communities, and partial discharge of pond water in March is suggested.

• Journal of the Korean Data and Information Science Society
• /
• v.28 no.1
• /
• pp.11-20
• /
• 2017

In this paper, we introduced linear spatial time series (space-time autoregressive and moving average model) and nonlinear spatial time series (space-time bilinear model). Also we estimated the parameters by Kalman Filter method and made comparative studies of power of forecast in the final model. We proposed several weight matrices such as equal proportion allocation, reciprocal proportion between distances, and proportion of population sizes. For applications, we collected Mumps data at Korea Center for Disease Control and Prevention from January 2001 until August 2008. We compared three approaches of weight matrices using the Mumps data. Finally, we also decided the most effective model based on sum of square forecast error.