• Journal of Advanced Marine Engineering and Technology
• /
• 제27권6호
• /
• pp.790-796
• /
• 2003

As a fluid machinery for piping liquid in the reactor cooling system, multi-stage centrifugal pump requires the structural dynamic stability against external dynamic excitation. This paper is concerned with the finite element analysis of its eigen behavior and seismic response to RRS(Required Response Spectrum) curves in the case of SSE (Safe Shutdown Earthquake). Through the finite element analysis, the major vibration characteristics of multi-stage centrifugal pump(MSCP) are investigated and seismic qualification based on the IEEE codes is executed. The numerical results show that the MSCP used in this study has enough seismic strength.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.285-290
• /
• 2007

KALIMER-600 is a sodium cooled fast reactor with a fast spectrum neutron reactor core. The NSSS design has three heat transport systems of a PHTS (Primary Heat Transport System), a IHTS (Intermediate Heat Transport System) and a SGS (Steam Generation System). PHTS is a pool type and has a large amount of sodium in the pool. The mechanical design targets are maintaining the enough structural integrity for a seismic load of SSE 0.3g and the thermal and mechanical loads by the high temperature environments and an economical competitiveness when compared with other reactor types.

• Smart Structures and Systems
• /
• 제6권1호
• /
• pp.17-27
• /
• 2010

The approach to damage detection and localization adopted in this paper is based on a statistical comparison of models built from the response time histories collected at different stages during the structure lifetime. Some of these time histories are known to have been recorded when the structural system was undamaged. The consistency of the models associated to two different stages, both undamaged, is first recognized. By contrast, the method detects the discrepancies between the models from measurements collected for a damaged situation and for the undamaged reference situation. The damage detection and localization is pursued by a comparison of the SSE (sum of the squared errors) histograms. The validity of the proposed approach is tested by applying it to the analytical benchmark problem developed by the ASCE Task Group on Structural Health Monitoring (SHM). In the paper, the results of the benchmark studies are presented and the performance of the method is discussed.

• Nuclear Engineering and Technology
• /
• 제29권5호
• /
• pp.417-431
• /
• 1997

To resolve a general argument about OBE elimination for the future nuclear power plant design, seismic responses of reactor vessel internals and fuel assembly for Ulchin nuclear power plant units 3 and 4 in Korea are investigated as an example. Dynamic analyses of the coupled internals and core are performed for the seismic excitations using the reactor vessel motions. By investigating the response relations between OBE and SSE and their response characteristics, the critical components for OBE loading are addressed. Also the fuel assembly responses are calculated using the core plate motions and their behavior is found to be insignificant for OBE elimination.

• 정보학연구
• /
• 제10권2호
• /
• pp.47-64
• /
• 2007

Finite failure NHPP models presented in the literature exhibit either constant, monotonic increasing or monotonic decreasing failure occurrence rates per fault. Accurate predictions of software release times, and estimation of the reliability and availability of a software product require quantification of a critical element of the software testing process : test coverage. This model called enhanced non-homogeneous poission process(ENHPP). In this paper, exponential coverage and S-coverage model was reviewed, proposes the exponentiated exponential coverage reliability model, which maked out efficiency substituted for gamma and Weibull model(2 parameter shape illustrated by Gupta and Kundu(2001). In this analysis of software failure data, algorithm to estimate the parameters used to maximum likelihood estimator and bisection method, model selection based on SSE statistics for the sake of efficient model, was employed.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.465-470
• /
• 2001

In this study, the seismic analysis of rack structure with fluid-structure interaction is performed through use of the Finite Element Method(FEM) code ANSYS. Fluid-structure interaction can specify in terms of an hydrodynamic effect which is defined as the added mass per unit length divided by the area of the cross section. Using the Floor Response Spectrum(FRS) obtained through the time-history analysis, modal analysis and seismic analysis under Operating Basis Earthquake(OBE) and Safe Shutdown Earthquake(SSE) condition is carried out. The fluid-structure interaction effects on the rack structure are investigated.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2002년도 추계 학술발표회 논문집
• /
• pp.11-18
• /
• 2002

The Ulsan fault with NNW-SSE strike is a very wide and long lineament about 50km along Gyeungju-Ulsan line in the southeastern part of Korea. According to previous studies the Ulsan fault was not considered as a fault but only long lineament since no displacement was found along the lineament. Recently several Quaternary faults were reported in the northeastern part of lineament, which implies the neotectonic movement in this area. We analysed drainage pattern and stream gradient using the DEM (Digital Elevation Model) data for both side of Ulsan fault line to check the recent topographic changes which indicate neotectonic movement. The result shows that stream index in the eastern part of Ulsan fault is higher than the one in the western part. This means that recent tectonic movement is more active in the eastern part of Ulsan fault.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2008년도 International Symposium on Remote Sensing
• /
• pp.228-231
• /
• 2008

For a satellite data communication, the technology of frame synchronization is widely used between a sender and a receiver. Last year, we suggested zero-loss frame synchronization [1] using pattern search and using bits threshold search algorithm that is based on SIMD technology [2,3]. This algorithm could solve both of hardware and software drawbacks, which are frame loss and low processing performance. However, this algorithm didn't optimize the processing of output data, synchronized data, which caused overhead to the memory allocation and the memory copy. Consequently, the performance of the frame synchronizer application was degraded. In this paper, we enhance previous work using a circular buffer in order to optimize the output data processing. The performance comparison with the previous algorithm shows that the enhanced proposed approach dramatically outperforms in the output data processing speed.

• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 2000년도 추계학술대회 논문집
• /
• pp.231-235
• /
• 2000

본 논문은 가상환경 노출에 따른 가상멀미를 포함한 인체의 영향을 평가하기 위한 연구이다. 이를 위해 20명의 피험자를 대상으로 하여 30분 동안의 가상현실 환경 노출 전과 노출 후에 나타나는 인체의 영향을 분석하였다. 실험평가를 위한 파라미터로는 550 test, COP, flicker test, 체온변화, 그리고 심박수 변화, 눈 깜빡임 값들이 이용되었다. 3D 입체영상의 제시는 LSG에 의해서 이루어졌으며, 특히 flicker test시에서는 모니터, LSG, HMD를 모두 사용하여 피로도를 측정, 비교하였다. 본 연구결과, 가상현실 환경의 노출 전 보다 노출 후에서 SSe Score, COP, 체온, 눈 깜빡임, 심박수가 증가함을 알 수 있다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.1210-1215
• /
• 2002

The spent fuel handling tool is used to handle the refuel bundle and treated by hoist rope on the bridge crane. The new developed handling tool of NPP(Nuclear Power Plant) should be conformed the structural stability under earthquake condition. In this study, the stress and seismic analysis of the handling tool are performed by finite element method. Using the Floor Response Spectrum(FRS) obtained through the time history analysis, the modal and seismic analysis under Operating Basis Earthquake(OBE) and Safe Shutdown Earthquake(SSE) load conditions are carried out. Total 4 cases of different locations of the trolly and the hook are investigated. With the spring-damper element, the tension analysis of hoist rope is conducted. The stability of handling tool under earthquake load condition is conformed with regulatory guide.