• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.8
• /
• pp.1503-1512
• /
• 1992

The strength evaluation and life prediction on the corrosion part of structure is one of the most important subjects, as a viewpoint of reducing economic loss by regular inspection, maintenance, repair and replace. For this purpose, it has been difficult to obtain the available data on growth of pit depth or growth rate of each pit which depends on time. In this paper, the life prediction and strength evaluation method was suggested for the structure with irregular stress concentration part by surface corrosion. The statistical distribution pattern of corrosion depth and the degree of fatigue strength decline were confirmed according to corrosion period by artificial corrosion of SS41 steel. The life prediction and the fatigue strength evaluation of materials with consideration of the corrosion period on the extreme value statistic analysis by the data of maximum depth of corrosion and on random variable was studied.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.8
• /
• pp.1493-1502
• /
• 1992

The purpose of this study is to identify the effects of loading variables on fatigue crack opening behavior, using structural steel SS41. To use various stress ratios, three kinds of the methods varying stress ratio were used; .DELTA.P const., P$_{max}$ const., and P$_{min}$ const.. To measure the opening load, the direct measuring method which measures the distance between two micro indentations 20 .mu.m behind crack tip and the elastic compliance method were used. As the results of present study, the following conclusions are obtained. First, using the direct measuring method, it was possible to measure the COD at any location behind crack tip. Second, as measuring point becomes farther from crack tip, opening load becomes smaller. Third, the acceleration of da/dN near notch is due to crack opening behavior. Finally, opening ratio is a function of not only R, but .DELTA.K.K.K.

• Journal of Welding and Joining
• /
• v.6 no.2
• /
• pp.56-63
• /
• 1988

The effects of PWHT (poste weld heat treatment) and stress simulating the residual stress during PWHT in weld HAZ of low and high strength steels on corrosion fatigue crack growth were evaluated. The obtained results are summarized as follows. 1. Fatigue crack growth rate of HAZ in air and 3.5% NaCl solution was slower than that of parent due to the signgularity in weld HAZ. 2. In the case of HT-80, 3.5% NaCl solutio nacts to accelerate the crack growth for all specimens, and the sensitivity of as-weld to corrosion environment was the greatest among other PWHT specimens. 3. Corrosion fatigue crack growth of parent, as-weld and PWHT speciments ofr SS41 as well as SM53B was retarded in comparison with the fatigue crack growth in air. 4. There was a tendency that crack growth of PWHT specimens subjected $10kg/mm^2$ was faster than that of PWHT specimens without stress during PWHT. 5. The retardation phenomenon of crack growth in corrosion environment is attributed to the crack branching decreased .DELTA.K due to the corrosion products and multi-cracks.

• Journal of Mushroom
• /
• v.8 no.2
• /
• pp.41-50
• /
• 2010

Mycoviruses have been found in many fungal species including mushrooms. Double-stranded (ds) RNA genomes were common type in mycoviruses, but single-stranded (ss) RNA mycoviruses were also reported in some fungal species. Sequencing analysis using cDNA cloning experiments revealed that mycoviruses can be classified into several different virus families such as Totiviridae, Hypoviridae, Partitiviridae and Barnaviridae etc. Because the nucleotide sequence data that are available in these days are very limited in a number of mycoviruses, the existence of more diverse viral groups in fungi are currently expected. In this review, we selected four different fungal groups, which were considered as the model systems for mycovirus related studies in both plant pathogenic fungi and edible mushroom species, and discussed about their molecular characteristics of diverse mycoviruses. The plant pathogenic fungi introduced here were Cryphonectria parasitica and Helminthosporium victoriae and the edible mushroom species were Agaricus bisporus and Pleurotus ostreatus.

• Journal of Animal Environmental Science
• /
• v.19 no.2
• /
• pp.183-190
• /
• 2013

Establishment of a new concept of environmental friendly livestock manure management is required based on the facts. But now liquid fertilizer quality in korea shows a large difference among regions and the regulations are uncertain. Focusing on precedent study on main level-grading factors of liquid fertilizer quality certification, the study collected laws and standards related to liquid fertilizer of livestock manure at home and abroad and produced evaluation standards. Liquid fertilizer was divided into four factors (fertilizing value, harmfulness, stability and uniformity). According to each item, scores were awarded based on 16 details: fertilizing value (Nitrogen concentration, the whole concentration of Nitrogen, Phosphoric acid and Kalium), harmfulness (heavy metals, pathogenic microorganism and antibiotics), stability (maturity degree and odour), uniformity (EC, BOD, SS, moisture content and salt). The grade of liquid fertilizer, A (42~48), B (34~41), C (26~33) were rated using total scores.

• Food Science and Biotechnology
• /
• v.14 no.6
• /
• pp.772-777
• /
• 2005

The goal of this study was to screen and characterize the physiological functions of Korean traditional wines (TW) and liquors (TL). Forty-two TW and TL were collected and evaluated for quality and cardiovascular activities. Ethanol content ranged from $9.0%{\sim}41%$, and pH ranged from $3.0{\sim}7.8$, and they also contained 0.01% to 0.67% of total acid. Samples contained a maximum of 2.0% of crude protein and $0.1%{\sim}14.0%$ of reducing sugar. Commercial CM-wine showed the highest antihypertensive angiotensin I-converting enzyme (ACE) inhibitory activity, 85.9%. The greatest fibrinolytic activity and platelet aggregation inhibitory activity were also found in commercial CM-wine (31.8U) and commercial SS2-wine (38.6 %), respectively. Commercial SHBI-liquor showed the highest HMG-CoA reductase inhibitory activity, 78%. The ACE inhibitor from commercial CM-wine was a peptide compound and also showed an antihypertensive effect in spontaneous hypertensive rats at a dosage of 1.5 mg/kg.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2005.10a
• /
• pp.620-625
• /
• 2005

It was monitored 3 years from 2003 to 2005 that the variational quality of water according to the arrangement toward natural shape of stream, and the variational characteristics of the each contents on water quality were analyzed after the separation into three periods of before, among and after arrangement construction. The quality monitoring results showed that the averages of water temperature, pH, DO, SS, BOD, T-N and T-P were $17.1{\sim}21.4^{\circ}C$, $6.44{\sim}7.74$, $7.02{\sim}8.36mg/L,\;0.7{\sim}51.9mg/L,\;0.310{\sim}1.044mg/L,\;0.41{\sim}2.43mg/L$ and $0.003{\sim}0.008mg/L$, respectively. The measured values of BOD, T-N and T-P were high just after construction, but the amounts were lowered as time passed, and finally stabilized in 2005. It ranged from 0.337 to 0.912 that the coefficients of correlation on linear regression between the discharges of water and BOD, T-N and T-P at each monitoring points, respectively.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.8
• /
• pp.248-261
• /
• 1999

The fatigue life of mechanical components and structures has been influenced by mechanical, material and environmental conditions. It is important to search out the load type and size for accurate cause of fracture at the damaged surface of material. The fractographic method by x-ray diffraction can utilize residual stress $\sigma$_r and half-value breadth B and find out the types and the mechanical conditions of fracture. This study showed the relationship between fracture mechanical parameters $\Delta$K, $K_{max}$ and X-ray residual stress $\sigma$_r for normalized SS41 steel with homogeneous crystal structure and M.E.F. dual phase steel(martensite encapsulated islands of ferrite). The fatigue crack propagation tests were carried out under stress ratios 0.1 and 0.5. The x-ray diffraction technique according to crack propatation direction was applied to fatigue fractured surface. Residual stress $\sigma$_r was independent on stress ratios by arrangement of $\Delta$K. The equation of $\sigma$_r$\Delta$K was established by the experimental data. Therefore, fracture mechanical parameters can be estimated can be estimated by the measurement of X-ray parameters.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.34 no.2
• /
• pp.223-230
• /
• 1998

Recently, with the rapid development in the industries such as mechanical plants, automobiles, ships and marine structures, it is enlarged by the use of the SS 41 steel. This mechanical plants and marine structures are exposed m corrosion because of Cl-under marine environments. To protect their accidents, mainly applied anti-corrosion epoxy coating and various protective its structures. In this study, corrosion control characteristics on the epoxy coating were investigated by the galvanic corrosion of impressed voltage tester under marine environments The main results obtained are as follows; 1. Corrosion current density of amine-epoxy coating becomes more increased than that of other epoxy coating and the time area rate of pin hole and pit until 5% becomes most rapid. 2. The potential of SUS 304 stainless steel(cathode) for Al-epoxy coating is nearly zero potential. 3. Corrosion current density of Amine-epoxy by shot blast becomes more decreased than that of not shot blast and cathodic potential becomes more noble. 4. As distance of anode and cathode is more decreased, corrosion current density of epoxy coating is more increased and cathodic potential becomes less noble.

• Journal of the Korean Chemical Society
• /
• v.13 no.1
• /
• pp.41-44
• /
• 1969

Eine neuentwickelte Methode zur Herstellung von Me${\ss}$praparaten wird fur die Bestmmung der Spurenelemente in Wasser Rontgenfluroreszspektrometrie angewendet. Supuren von Kupfer, Blei, Zink, Nickel, Kobalt und Eisen werden aus großen Mengen von naturlichem Wasser durch Verdampfen konzentriert. Aus der konzentrierten Losung werden die Spurenelemente durch Einleitung von Schwefelwasserstoff bei pH 8 unter Zusatz von Aluminiumsulfat-Trager ausgefallt. Die Niederschlage der Metallsulfide werden durch Membranfilter filtriert, mit Gelatine fixiert und ihre Absolutmengen durch Rontgenfloreszenzanalyze bestimmt. Kupfer, Blei, Zink, Nickel, Kobalt und Eisen werden bei einer Konzentration von 2.5 bis 50.0 p.p.b. mit einer relativen Standardabweichung 14.0% gemesser.