• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.4
• /
• pp.1-10
• /
• 2022

In this study, to evaluate the possibility of using a steel spring as a displacement-dependent damping device, tensile loading and cyclic loading tests were performed. The main experimental variables were the type of steel (SAE9254 and SS275), the spring constant (700 N/mm, 1,000 N/mm, and 1,400 N/mm), and the presence or absence of heat treatment for SAE9254. As a result of the tensile test, the ratios of the measured spring constant to the design spring constant of the steel springs made with SAE9254 ranged from 1.08 to 1.13, while the ratios of the design spring constant and the measured spring constant of the steel springs made with SS275 ranged from 0.86 to 0.97. After yielding, the slope values of the load-displacement curve of the SAE9254 with/without heat treatment were about 240~251 N/mm and 92 N/mm, respectively, but the slope values of the load-displacement response of SS275 were almost zero. According to the uniaxial cyclic loading test results, all specimens were satisfied with three conditions for a displacement-dependent damping device in KDS 41 17 00 (2019): the maximum force and minimum force at zero displacement, the maximum force and minimum force at the maximum displacement, and the energy dissipation capacity. In addition, the equivalent damping ratios of steel springs made with SAE9254(non-heat treatment) and SS275 were approximately 2.8 times and 1.9 times greater, respectively, than that of steel springs made with SAE9254.

• Food Science and Preservation
• /
• v.23 no.2
• /
• pp.275-282
• /
• 2016

STAR of STAR (SS 01-04) is a series of drinks that consist of various extracts obtained from Coriolus versicolor, Artemisia capillaris Thunb., Hovenia dulcis, Acanthopanax sessiliflorus, Lycium chinense, Citrus reticulata, Saururus chinensis, Pueraria lobata, Pyrus pyrifolia, and Oenanthe javanica. A purpose of this study was to investigate the hepatoprotective effect of SS 01-04. Antioxidant activity of the drinks was evaluated by conducting a hydroxyl radical-scavenging assay. Cytotoxicity and hepatoprotective potential were determined using HepG2 cells in vitro, while protective effects against acute hepatotoxicity was evaluated in vivo. The antioxidant activity of the SS 01-04 at concentration of 100 and 250 mg/mL was similar to that of $50{\mu}M$ vitamin C. tert-Butyl hydroperoxide (tBHP)-induced production of reactive oxygen species (ROS) was blocked by SS 01, 03 and 04 in a dose-dependent manner. Treatment with SS 04 significantly lowered the serum levels of alanine aminotransferase and aspartate aminotransferase in an animal model of carbon tetrachloride $(CCl_4)-induced$ hepatotoxicity (p<0.05). In addition, SS04 increased glutathione level while decreased malondialdehyde level in the liver considerably (p<0.05). It also inhibited the $CCl_4-induced$ increase in the levels of triglyceride and cholesterol in serum and the liver. These findings indicated that SS 01-04 possessed antioxidant activity and protect against ROS. In particular, SS 04 is potentially highly beneficial in treating liver damage as it scavenges reactive free radicals and boosts the endogenous antioxidant system.

• Environmental Engineering Research
• /
• v.24 no.3
• /
• pp.449-455
• /
• 2019

To investigate the effect of seaweed (SW) addition on anaerobic co-digestion of food waste (FW) and sewage sludge (SS), batch experiments were conducted at various substrate concentrations (2.5, 5.0, 7.5, and 10.0 g volatile solids (VS)/L) and mixing ratios ((FW or SS):SW = 100:0, 75:25, 50:50, 25:75, and 0:100 on a VS basis). The effect of SW addition on FW digestion was negligible at low substrate concentration, while it was substantial at high substrate concentrations by balancing the rate of acidogenesis and methanogenesis. At 10 g VS/L, $CH_4$ production yield was increased from 103 to $350mL\;CH_4/g$ VS by SW addition (FW:SW = 75:25). On the other hand, SW addition to SS enhanced the digestion performance at all substrate concentrations, by providing easily biodegradable organics, which promoted the hydrolysis of SS. $k_{hyd}$ (hydrolysis constant) value was increased from 0.19 to $0.28d^{-1}$ by SW addition. The calculation showed that the synergistic $CH_4$ production increment by co-digesting with SW accounted for up to 24% and 20% of total amount of $CH_4$ production in digesting FW and SS, respectively.

• Koreanishche Zeitschrift fur Deutsche Sprachwissenschaft
• /
• v.10
• /
• pp.251-275
• /
• 2004

In diesem Aufsatz geht es um die Frage. womit Leo Weisgerber seine Sprachtheorie entwickelt hat. Er wurde von mehreren Theoretikern und Wissenschaftlern $beeinflu{\ss}t$, wie z. B. Wilhelm von Humboldt, Ernst Cassirer, Wilhelm Wundt, Ferdinand de Saussure usw. Aber in einigen besonderen Bereichen seiner Sprachtheorie wurde or besonders von F. de Saussure stark $beeinflu{\ss}t$. Leo Weisgerber hat sehr viele $Aufs\"{a}tze$ und $B\"{u}cher$ geschrieben. Aber darunter gibt es einige Werke, die seine Sprachtheorie zusarnmenfassend darstellen. Sie sind die folgenden: seine Habillitationsschrift(1925), Muttersprache und Geistesbildung(1929), Grundzuge der inhaltbezogenen Grammatik(1962). Wir haben daher versucht, zu erfurschen, welchen Einfluss Saussure auf diese Werke Weisgerbers ausgeubt hat. In der Habilitationsschrift konnten wir herausfinden, $da{\ss}$ Weisgerber die $Ans\"{a}tze$ Sausssures kritisierend aufgenommen hat. Wahrend Saussure Sprache nicht als einen Organismus betrachtet $h\"{a}lt$ Weisgerber Sprache $f\"{u}r$ einen lebendigen Organismus. $Dar\"{u}her$ hinaus ist nach Weisgerber die Unterscheidung, zwischen langue und parole $unn\"{o}tig$. Leo Weisgerber hat in dem Buch 'Muttersprache und Geistesbildung' seine Zeichen-Theorie zusammenfasst. Da war or damit einverstanden, $da{\ss}$ ein Zeichen aus signifiant und signifie besteht. $Au{\ss}erdem$unterscheidet or Sprache, $\"{a}hnlich$ wie Saussure, wie folgt : das Sprechen, der Sprachbesitz des einzelnen, Sprache als Kulturbesitz einer Gemeinschaft, das allgemein menschliche Prinzip Sprache im Sinne der fuel die Menscheit kennzeichnenden Sprachtaetigkeit. In 'Grundzugo der inhaltbezogenen Grammatik' stellt or dar, wie die Untersuchung der Sprachinhalte $durchgef\"{u}hrt$ werden soll. Nach ihm ist ein Wortinhalt immer $erkl\"{a}rbar$, durch ein Wert in einem Wortfeld. Dieser Begriff 'Wert' entstammt vom 'valour', den Saussure gemacht hat. Aber die Zeichentheorie Weisgerbers ist ein $bi{\ss}chen$ anders geworden. $W\"{a}hrend$ Saussure ein zweidimensionales Zeichenmodel (signifiant und signifie) aufstellt, stellt Weisgerber ein dreidimensionales Zeichenmodell dar, das aus drei Elemente (Lautform - geistige Zwischenwelt - $Au{\ss}enwelt$) besteht. Aus diesen Ergebnissen der Untersuchung konnen wir $schlie{\ss}en$, $da{\ss}$ Weisgerber mehr oder weniger von F. do Saussure beeinflusst wurde.

• Journal of Korean Society on Water Environment
• /
• v.24 no.1
• /
• pp.69-77
• /
• 2008

This study was conducted to know the characteristics of agricultural non-point source pollutants runoff by rainfall events at the upper catchment of Goseong reservoir in Gonjy city, Chungnam Province. For this study, the monitoring sites of the research catchment were set nineteen during the research period (between June 2005 and October 2006). Average runoff coefficient were observed 0.51 in 2005, 0.71 in 2006, respectively. The correlation coefficient (r) between the rainfall and peak-flow was investigated 0.787. By rainfall events, the water quality of the sites were shown like this : BOD 0.555~9.60 mg/L, T-N 0.01~13.50 mg/L, T-P 0.002~2.952 mg/L, and SS N.D~820.0 mg/L. The strong rainfall intensity was the most important factor of the soil erosion. The gabs of the arithmetic mean concentrations and the flow weighted mean concentrations were observed as the followings : BOD 0.0~29.2%, T-N 0.1~11.4%, T-P 0.4~95.2%, and SS 1.7~57.0% in 2005, and BOD 1.0~11.9%, T-N 0.7~7.3%, T-P 9.9~36.5%, and SS 6.6~36.5% in 2006, respectively. The BOD pollution load was 2,117 kg (36% of the total BOD loading of survey periods) while, T-N was 3,209.0 kg (27.9% of the total T-N loading of survey periods), T-P was 136.4 kg (37.4% of the total T-P loading of survey periods) and SS was 72,733.8 kg (51.8% of the total SS loading of survey periods) in the year 2005. In case of 2006, BOD load was 1,321.7, T-N was 2,845.8, T-P was 42.9, and SS was 16,275.8 kg, respectively.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.12
• /
• pp.1912-1921
• /
• 2020

Objective: This study assessed genomic prediction accuracies based on different selection methods, evaluation procedures, training population (TP) sizes, heritability (h²) levels, marker densities and pedigree error (PE) rates in a simulated Korean beef cattle population. Methods: A simulation was performed using two different selection methods, phenotypic and estimated breeding value (EBV), with an h² of 0.1, 0.3, or 0.5 and marker densities of 10, 50, or 777K. A total of 275 males and 2,475 females were randomly selected from the last generation to simulate ten recent generations. The simulation of the PE dataset was modified using only the EBV method of selection with a marker density of 50K and a heritability of 0.3. The proportions of errors substituted were 10%, 20%, 30%, and 40%, respectively. Genetic evaluations were performed using genomic best linear unbiased prediction (GBLUP) and single-step GBLUP (ssGBLUP) with different weighted values. The accuracies of the predictions were determined. Results: Compared with phenotypic selection, the results revealed that the prediction accuracies obtained using GBLUP and ssGBLUP increased across heritability levels and TP sizes during EBV selection. However, an increase in the marker density did not yield higher accuracy in either method except when the h² was 0.3 under the EBV selection method. Based on EBV selection with a heritability of 0.1 and a marker density of 10K, GBLUP and ssGBLUP_0.95 prediction accuracy was higher than that obtained by phenotypic selection. The prediction accuracies from ssGBLUP_0.95 outperformed those from the GBLUP method across all scenarios. When errors were introduced into the pedigree dataset, the prediction accuracies were only minimally influenced across all scenarios. Conclusion: Our study suggests that the use of ssGBLUP_0.95, EBV selection, and low marker density could help improve genetic gains in beef cattle.

• Journal of the Korea Convergence Society
• /
• v.10 no.8
• /
• pp.153-158
• /
• 2019

The overall environmental regulations of the industry have been strengthened due to environmental pollution that occurred in modern society. Therefore, R&D of selective reduction catalyst (SCR) is needed to meet these environmental regulations. This paper carried out thermal analysis to develop the pneumatic damper valve (PDV), which is a key component of SCR system. For thermal analysis, verification of material properties was performed first. Verification was performed through the thermal properties test and the thermal tensile test of the specimen, and the results were reinforced with the material properties to enhance the reliability of the thermal analysis.The heat analysis was intended to identify thermal characteristics with PDV in total of three materials (SM400B, SS275, SB410) applied under the conditions of use of PDV, and to confirm the structural stability of the PDV.

• Journal of Conservation Science
• /
• v.37 no.3
• /
• pp.302-311
• /
• 2021

This study uses traditional lacquer techniques to coat the metal surface and evaluates its physical properties to check the applicability of the lacquer coating. For this purpose, a total of six specimens were produced by setting the variation conditions for the number of times (1, 2, 3) and the heating temperature (120℃, 150℃) using SS275 metal(60*60 mm) and 'Wonju lacquer'. For analysis, chromaticity measurements, contact angle/surface energy measurements, Chemical Resistance, and cross-cut tests were used. The analysis showed that the corrosivity was improved and the adhesion of lacquer to the metal surface was excellent. There was no significant change in contact angle/surface energy. Also, there was no significant difference in color. Through this study, it was confirmed that lacquer on metal surfaces improves waterproofing and has a anticorrosion effect. We could also check the proper number of lacquer and heating temperature. Additional physical characteristics such as hardness and wear rate should be studied. It is also necessary to study how lacquer can be painted with a certain thickness.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.6
• /
• pp.637-644
• /
• 2021

Dynamic response of structures can be evaluated experimentally by conducting cyclic loading tests. It has been known that steel materials are rate-dependent and the lateral response of a structure is significantly affected by the presence of axial force. However, the rate-dependency of steel column structures subjected to both axial and lateral loads has not been sufficiently studied yet due to the difficulty of controlling the axial force in a real-time manner during test. This study introduces an advanced way to apply the axial load in real-time to a column specimen using the adaptive time series (ATS) compensator and the flexible loading beam (FLB), where the H-shape steel columns made of SS275 are used for monotonic and cyclic loading tests with various loading rates with axial loads. The lateral strength and post-yield response of the steel columns are compared for each of monotonic and cyclic loading tests. The estimating equation of yield stress of various strain rate has proposed and finite element analysis were performed for comparison.

• Journal of the Society of Disaster Information
• /
• v.20 no.2
• /
• pp.411-418
• /
• 2024

Purpose: This study aims to develop brand new bolt fastening type of seismic retrofit using high tensile alloy materials for existing reinforced concrete columns. Method: A T-type cross-sectional seismic retrofit made of SUS304 and SS275, and the high-tensile bolt of SCM435 was analyzed for the effect of material properties on seismic performance through bending test. Result: The experiment using SUS304 shows a 7% higher maximum strength and 22% higher yield strength and shows a higher compressive stress of 360MPa. In addition, the change in the neutral axis is also smaller. Conclusion: Seismic retrofit using SUS304 is considered to be better in terms of yield strength, tensile strength, neutral axis change, and ductility, and it is considered necessary to experiment with RC column real experiments in future studies.