• 한국식품위생안전성학회지
• /
• 제35권4호
• /
• pp.398-410
• /
• 2020

본 연구에서는 13종의 밥류, 11종의 면류, 그리고 15종의 소스류에 함유되어 있는 수용성 비타민 B₁ (thiamin), B₂ (riboflavin), 그리고 B₃ (niacin)의 함량을 확인하였다. 실험 결과에 대한 신뢰도를 확인하기 위해 검출한계(LOD)와 정량한계(LOQ)를 확인하였으며, 표준인증물질(SRM 1849a)을 통한 결과의 정확도를 확인하여 우수한 지표를 나타내었다. Thiamin에서 밥류의 경우 잡채밥이 가장 높은 함유량을 확인하였고, 면류의 경우 막국수, 그리고 소스류의 경우 토마토 스파게티소스가 가장 높은 함유량을 확인하였다. Riboflavin은 밥류의 경우 짜장밥, 면류의 경우 비빔국수, 소스류의 경우 강황카레 약간 매운맛에서 가장 높은 함유량을 확인하였다. Niacin에서는 밥류, 면류, 그리고 소스류에서 각각 치킨볶음밥, 잔치국수, 짜장소스에서 가장 높은 함유량을 확인하였다. 한국인 성인 남녀의 수용성 비타민 1일 섭취권장량에 대하여 식품에 함유되어 있는 양을 확인한 결과 강황카레 약간 매운맛에서 가장 높은 riboflavin의 함량이 남자의 경우 217.40%, 여자의 경우 271.75%로 가장 높은 함량을 확인하였다. 본 연구를 통해서 밥류, 면류, 그리고 소스류에 함유된 수용성 비타민에 대한 영양성분 데이터베이스를 구축하고, 1일 섭취권장량에 대한 식품에 함유된 수용성 비타민의 함량 확인을 통해 국민 식생활에 필요한 자료를 제공하고자 한다.

• 한국식품위생안전성학회지
• /
• 제35권6호
• /
• pp.535-543
• /
• 2020

유전적 조절, 유전자 발현 그리고 환경적 단서, 화학적 신호에 대응하는 표현형 변이에서 세포 RNA는 ubiquitous 역할 이외에도 세포 외 RNA(exRNA)라 하는 새로운 형태의 RNA는 추후 연구의 방향을 제시한다. exRNA는 membrane vesicles 또는 세포 외 소포체(EV)로 알려진 membrane blebs를 통해 세포 외부로 운반된다. EV의 형성은 원핵생물, 진핵생물, 고세균을 포함한 모든 미생물군에 우세하게 보존되어있다. 본 리뷰는 세균 유래 exRNA에 관해 세가지 주제에 초점을 두었다. exRNA의 발견과 박테리아 유전자 배열에 대한 외부 RNA의 영향, b. exRNA의 분비기작을 통한 방출, c. 다른 그람음성 및 그람양성균에 의해 분비되는 exRNA로 고안될 수 있는 응용 가능분야이다. 본 리뷰에서 장내 미생물군의 probiotics 및 후성유전학적 규제에서 본 exRNA와 exRNA마커와 같은 EV파생 응용프로그램에 대한 의견을 제공할 것이다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.806-807
• /
• 2011

This paper presents a new sensorless controller used with both the classical sliding mode observer(SMO) and the rate of current change in order to a reduced torque ripple for switched reluctance motor (SRM) sensorless drives. The new sensorless scheme consists of a sliding mode observer (SMO)-based position sensorless approach for high speeds along with a low-resolution discrete the rate of current change for low speeds and standstill. The new position estimation resets between the SMO and the low-resolution of current change according to the speed sign and the position error difference between the SMO and the low-resolution rate of current change. The simulation results show the robustness of this new high performance sensorless control approach with the hybrid sensorless control topology.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제51권8호
• /
• pp.449-456
• /
• 2002

3D Equivalent magnetic Circuit Network Method (EMCNM) is comparatively the easy way that analyzes 3D models of Electric Machine by using permeance as a distributive magnetic circuit parameter under the existing magnetic equivalent circuit method and Numerical Method. The existing 3D EMCNM could not correctly describe the shape of an analysis target when using rectangular shape element or fan shape element, so it made errors when calculating permeance. Therefore, this paper proposes the trapezoidal element contained rectangular element, fan-shape element, and quadrilateral element to express a shape. The proposed method in this research was confirmed as a useful and an accurate method through comparing with the analysis result of SRM model that is sufficiently guaranteed by 2D-Analysis.

• 통합자연과학논문집
• /
• 제11권2호
• /
• pp.87-92
• /
• 2018

5-Hydroxytryptamine receptor 7 ($5-HT_7R$) is one of G-Protein coupled receptors, which is found to be involved in the pathophysiology of various neurological disorders including depression, sleep disorders, memory deficiency and neuropathic pain. After activation of $5-HT_7R$ by serotonin, it activates the production of the intracellular signaling molecule cyclic AMP. The availability of 3D structure of the receptor would enhance the development of new drugs. Hence, in the present study, homology modelling of human 5-hydroxytryptamine receptor 7 ($5-HT_7R$) was performed using comparative modelling (Easy Modeller) and threading (I-TASSER) approaches. The generated models were validated using Ramachandran plot and ERRAT plot and the best models were selected based on the validation results. The 3D model developed here could be useful for identifying crucial residues and further docking study.

• Journal of Electrochemical Science and Technology
• /
• 제5권3호
• /
• pp.73-81
• /
• 2014

This paper describes the continuous flow operation of membraneless sodium perborate fuel cell using acid/alkaline bipolar electrolyte. Here, hydrazine is used as a fuel and sodium perborate is used as an oxidant under Alkaline-acid media configuration. Sodium perborate affords hydrogen peroxide in aqueous medium. In our operation, the laminar flow based microfluidic membranleless fuel cell achieved a maximum power density of $27.2mW\;cm^{-2}$ when using alkaline hydrazine as the anolyte and acidic perborate as the catholyte at room temperature with a fuel mixture flow rate of $0.3mL\;min^{-1}$. The simple planar structured membraneless sodium perborate fuel cell enables high design flexibility and easy integration of the microscale fuel cell into actual microfluidic systems and portable power applications.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권1호
• /
• pp.15-19
• /
• 2000

The main advantages of DSPSRM lie in the simple robust construction, low manufacturing cost and simple driving circuit. Especially, it is possible to make shortly the axial length of DSPSRM. therefore, it is suitable to setup this motor in a narrow space. For practical use, prototype of DSPSRM was already manufactured. In this paper, we explain driving method and design driving circuit of DSPSRM. And then speed, torque and efficiency are measured. As a result of measurement, the torque was constant at normal speed and the speed was linearly increased as the current increase. Therefore, we verify that DSPSRM is suitable for low-speed fan load.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제4B권3호
• /
• pp.114-121
• /
• 2004

Switched reluctance motors have received much attention as a driving means for various industrial applications because they have simple construction, low cost and high efficiency. Nevertheless, the requirements of drive converters make it difficult to lower the overall system cost as compared with the DC motor application. Single phase switched reluctance motors (SPSRMs) provide a solution to the high cost problem since the number of switching power devices can be reduced and consequently the trials for application are increased. However, research involving SPSRMs, especially in the area of design work, is insufficient. This paper introduces a novel design methodology of single phase SRM. The design work for SPSRM comprises the determination of many variables such as stator and rotor pole arc as well as on, off and so on. Managing all variable combinations leads to lengthy computation time and a fault in the design process. For that reason, a reliable technique and brief procedure term are required in SPSRM design.

• 전기학회논문지
• /
• 제66권2호
• /
• pp.323-327
• /
• 2017

Soft magnetic composite (SMC) material has recently received a significant attention in the area of high-speed machines because of its unique properties such as good design flexibility and low eddy current loss. However, SMC's electromagnetic property is poor compared to silicon steel in terms of saturation, relative permeability, and hysteresis loss. This paper presents a technique for utilization of SMC in two strategic designs of a switched reluctance machine (SRM) depending on a loss pattern. To investigate the effect of SMC's merits and demerits, the stator material is changed from laminated steel to SMC.

• Advances in concrete construction
• /
• 제4권1호
• /
• pp.37-47
• /
• 2016

The objective of the present work is to evaluate the influence of two different methods of improving the ductility of Reinforced Concrete Frames and their influence on the full range behavior of the frames with M40 grade of concrete. For this purpose one fourth scale reinforced concrete square frames are experimentally tested subjected to static cyclic loading for three cases and monotonic loading for one case. The parameters are varied as method introducing ductility to the frame viz. (i) by using conventional concrete (ii) adding 1% of steel fibres by volume of concrete at hinging zones (iii) using self-compacting concrete with fibres at hinging zones. The energy absorption by ductile and non-ductile frames has been compared. The behavior of frames tested under cyclic loading have revealed that there is a positive trend in improvement of ductility of frames when fibrous concrete is used along with self-compacting concrete.