• Korean Journal of Materials Research
• /
• v.9 no.8
• /
• pp.798-803
• /
• 1999

This study has been focused on the influence of Fe(III) incorporation into framework of SAPO-34(FeAPSO-34s;/su/Fe = 40,20 and 5) on the catalytic performance of methanol conversion. By rapid crystallization method, the XRD,SEM,ICP,TG-DTA, and BET sufrace areas. With an increase in the Fe content incorporated to the framework, the crystallinity identified from the intensity of XRD peaks slightly decreased and the particle size observed from SEM photographs decreased also. On the other hand, the acid sites in crystal decreased kin the Fe-incorporated samples, and the selectivity to ethylene for FeAPSO-34 catalyst on methanol conversion was enhanced compared with the nonmetal incorporated(SAPO-34)

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.6
• /
• pp.959-968
• /
• 2000

In this paper, a low phase noise frequency synthesizer used to TX local oscillator in BWLL RF tranceiver is presented. The phase-locked stable 25GHz-band frequencies in BWLL TX LO are obtained by using 2 GHz baseband frequency synthesizer, sixth-harmonic frequency multiplier and frequency doubler at 12 GHz band frequency input. The 25 GHz band frequency synthesizer presented in this paper has 3-output frequencies at 24.92 GHz, 25.10 GHz, 25.26 GHz. At 24.92 GHz frequency the synthesizer has 0.44 dBm output power and shows -87.93 dBc/Hz(a 10 KHz), -109.54 dBc/Hz (a100 KHz) phase noise characteristics .

• Journal of Korean Institute of Industrial Engineers
• /
• v.39 no.4
• /
• pp.239-246
• /
• 2013

Global restaurant franchises are becoming more and more popular in China, Japan, and South Korea. Understanding target customers' needs for restaurant franchises is considered one of the most important factors for their business success. In this study, four domains-food-related domain (FRD), interior-related domain (IRD), staff-related domain (SRD), and convenience-related domain (CRD)-and 24 elements were classified. A survey with 450 respondents in the three capital cities (Beijing, Tokyo, and Seoul) was then conducted to examine the effect of the factors influencing customer satisfaction. After statistical analysis, thirteen main elements were found as factors influencing customer satisfaction. The analysis result showed that the food-related domain (FRD) was the most important in Beijing. The interior-related domain (IRD) and the convenience-related domain (CRD) were considered the most important in Tokyo and Seoul. Some cultural differences in customer satisfaction were also found. The results provide a guideline for better customer experience management of a restaurant franchise in the three cities.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.5
• /
• pp.801-807
• /
• 2010

Requirements management is one of the most essential activities of systems engineering in developing successful weapon systems. Particularly it is very important to consistently manage the traceability among the user requirements, the system requirements, the development specifications and the testing plans throughout the entire life cycle of the weapon system. However, the most part of requirements-related activities has centered around the functional and performance requirements but the integrated logistics support(ILS) requirement has not properly been managed. In this regard, a special attention is needed to develop and manage the ILS requirements. To do so, the ANSI/EIA-632 standard can be referred as a starting point since the ILS requirements of the weapon system under development are specified by the enabling products whereas the functional and performance requirements are covered by the end product requirements. Specifically, we first review and model several cases of previous weapon systems development, which reveals the problem of interest. Then, under the framework of ANSI/EIA-632, we study a hierarchical model for effectively managing ILS requirements by analyzing the features of ILS requirements. Finally, the value of the proposed model is discussed through the case study of electronic warfare equipment.

• Journal of Korean Academy of Nursing
• /
• v.32 no.6
• /
• pp.906-916
• /
• 2002

The purpose of this study was to identify the change and difference and relationship of postpartum depression and physical image. Method: The subjects consisted of 86 postpartum women at one general hospital in Seoul. The data was collected from September to November 2001. The instrument used for this study were SRD (Self-Rating Depression Scale) and Norris' Body Image Scale to evaluate depression and body image. The collected data was analyzed with frequency, mean, t-test, paired t-test, ANOVA and Pearson's correlation coefficient. Result: The result of this study were as follows: 1. The mean score of D2 was significantly higher than D1(p=.003). There was no difference significantly B1 and B2(p=310). 2. There was significant correlation between the two, D1-D2(r=.381, p<.01), B1-B2(r=.364, p<.01), D1-B1(r=.579, p<.01), D2-B2(r= .567, p<.01). (*D1: depression of postpartum 1-3days, D2: depression of postpartum 6-8weeks, B1: body image of postpartum 1-3days, B2: body image of postpartum 6-8weeks) Conclusion: There was very high postpartum depression in postpartum women, but body image was positive. Also, there was correlated to postpartum depression and body image. Thus it is necessary to implement nursing intervention focused on to decrease the postpartum depression and to enhance the body image of the postpartum women.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.2
• /
• pp.271-279
• /
• 2008

In this paper, we investigate interference between short-range radiocommunication devices(SRDs) with frequency hopping spread spectrum(FHSS) and direct sequence spread spectrum(DSSS) methods when they are in the same frequency bands. In order to analyze interference from unwanted emission of SRD with DSSS to that of FHSS, Monte-carlo(MC) simulation method is employed and interference probabilities are calculated. We simulate interference scenarios in accordance with several duty cycles and bandwidths. It is also assumed that the propagation model is free space. The effect of distance between interfering transmitter and victim receiver is analyzed and bit error rate(BER) is simulated. From the interference analysis results, it is shown that duty cycle affects compatibility more than band-width does. Also, we can make sure of the separation distance which satisfies BER criterion when there are only one interfering transmitter and multiple interfering transmitters.

• Korean Journal of Oriental Medicine
• /
• v.2 no.1
• /
• pp.514-550
• /
• 1996

There are many theory in acupuncture mechanism, so we must know the detail contents. and then we can use the acupuncture as we know. the follow article will be helpful in this part. 1. Spinal cord are role in intermediate part in somatosensorypathway also in acupuncture stumulating tract 2. Acute pain pathway started in laminae I, V of gray colmn, next are the spinothalamic tract(trigeminal spinothalamic tract in above neck part) and then go to the specific thalamic nucleus. but chronic pain in laminae II, III, VI, VII, next are spinoreticular tract(trigeminal spinoreticular tract in the neck part) and finally to the nonspecific thalamic nucleus. 3. Thalamus is very important area in somatosensory stimuation including acupuncture stumulating sensory also as a pain control center. but except this, there are Hypothalamus, Limbic system Cerebral cortex and Cerebellum as intermediator. as we Know hypothalamus is related to the emotional analgesic system with a limbic system. 4. A ${\delta$ fiber has relationship in Acute, sharp and initial pain, contrary this C fiber is related with Chronic, dull and last pain. 5. In Acupuncture mechanism of pain analgesia, there are two theory, one is gate control theory as large fiber another is stimuation produced analgesia as small diameter fier. 6. In DNIC, the stimulation sources are mechanical, thermal, heating, pain and acupuncture stimulation etc. we call these as a Heterotopic Noxious Stimulation. 7. In DNIC, SRD(Subnucleus reticularis dorsalis)is core nucleus in pain imtermediated analgesic mechanism. 8. Takeshige insisted nonacupuncture point dependent analgesic mechanism and acupuncture point dependent analgesic mechanism. and protested that Stimulation acupuncture piing evoke blocking nomacupuncture point analgesic pathway.

• Journal of Biomedical Engineering Research
• /
• v.40 no.2
• /
• pp.62-67
• /
• 2019

The purpose of this study was to evaluate the performance of deep neural network model in order to determine whether there is a risk factor for coronary artery disease based on the cardiac variation parameter. The study used unidentifiable 297 data to evaluate the performance of the model. Input data consists of heart rate parameters, which are SDNN (standard deviation of the N-N intervals), PSI (physical stress index), TP (total power), VLF (very low frequency), LF (low frequency), HF (high frequency), RMSSD (root mean square of successive difference) APEN (approximate entropy) and SRD (successive R-R interval difference), the age group and sex. Output data are divided into normal and patient groups, and the patient group consists of those diagnosed with diabetes, high blood pressure, and hyperlipidemia among the various risk factors that can cause coronary artery disease. Based on this, a binary classification model was applied using Deep Neural Network of deep learning techniques to classify normal and patient groups efficiently. To evaluate the effectiveness of the model used in this study, Kernel SVM (support vector machine), one of the classification models in machine learning, was compared and evaluated using same data. The results showed that the accuracy of the proposed deep neural network was train set 91.79% and test set 85.56% and the specificity was 87.04% and the sensitivity was 83.33% from the point of diagnosis. These results suggest that deep learning is more efficient when classifying these medical data because the train set accuracy in the deep neural network was 7.73% higher than the comparative model Kernel SVM.

• Journal of the Semiconductor & Display Technology
• /
• v.17 no.4
• /
• pp.21-26
• /
• 2018

Recently, the emergence of 3D cameras, 3D scanners and various cameras including Lidar is expected to be applied to applications such as AR, VR, and autonomous mobile vehicles that deal with 3D data. In Particular, the 3D point cloud data consisting of tens to hundreds of thousands of 3D points is rapidly increased in capacity compared with 2D data, Efficient encoding / decoding technology for smooth service within a limited bandwidth, and efficient service provision technology for differentiating the area of interest and the surrounding area are needed. In this paper, we propose a new quality parameter considering characteristics of 3D point cloud instead of quality change based on assumed video codec in MPEG V-PCC used in 3D point cloud compression, 3D Grid division method and representation for selectively transmitting 3D point clouds according to user's area of interest, and propose a new 3D Manifesto. By using the proposed technique, it is possible to generate more bitrate images, and it is confirmed that the efficiency of network, decoder, and renderer can be increased while selectively transmitting as needed.

• 한국해양학회지
• /
• v.29 no.1
• /
• pp.17-27
• /
• 1994

The sediment collected from KODOS91-1 were studied using X-ray diffraction(SRD) analysis to clarify the composition and vertical distribution of clay minerals. Micropaleontological data(Radiolarians) was applied to identify the changes in post-depositional environment and chemical mechanism leading to the formation of authigenic minerals. The result show that the highest concentration of smectite is occurred in the lower part(Unit II, III) of sediment column and the lowest concentration in the upper part(Unit I) whereas terrestrial minerals, such as illite, kaolinite and quartz, indicate the opposite trends. Radiolarians in the upper part are composed entirely of Quaternary/Tertiary mixtures, whereas in lower sediment units generally revealed the middle Miocene to the Eocene. This may imply that the Quaternary and Tertiary sedimentary processes were continuously affected by reworking of older sediments and subsequent resegmentation. The changes of the sediment color, peak pattern of minerals and presence of reworked microfossils at the unit boundaries have been interpreted as evidence of authigenic formation. Mineralogical characteristics of the sediments in study area strongly indicates changes in paleoenvironments through geologic time, including changes in post-depositional conditions by physical processes and chemical mechanisms.