• 한국건축시공학회지
• /
• 제5권3호
• /
• pp.101-107
• /
• 2005

This paper reports the contribution of Shrinkage reducing admixture(SRA) to the physical properties and drying shrinkage of concrete. Dosage of SRA is varied with. For the properties of fresh concrete, an increase in SRA dosage results in a decrease in fluidity and air content, while setting time is accelerated. For the properties of hardened concrete, the incorporation of mineral admixture leads to a decrease in compressive strength at early age, whereas after 28 days, the incorporation of fly ash(FA) and blast furnace slag(BS) has greater compressive strength than conventional concrete without admixture. The use of SRA results in a decrease in compressive strength. The incorporation of SRA with every $1\%$ increase causes the decrease of compressive strength by as much as $3\~6\%$. For drying shrinkage properties, the incorporation of FA and BS reduces drying shrinkage slightly. The use of SRA also decreases drying shrinkage. Every $1\%$ of increase in SRA dosage can reduce drying shrinkage by as much as $10\~15\%$

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2004년도 학술.기술논문발표회
• /
• pp.61-64
• /
• 2004

This study is to investigate the engineering and shrinkage properties of concrete incorporating shrinkage reducing agent(SRA) and expansive additive(EA) in order to reduce shrinkage of concrete. According to results, as for the properties of fresh concrete, increase in, SRA and EA content leads to reduce the fluidity but to increase the air content, and as for setting time, there is little difference. For strength properties, it decreased with an increase in SRA dosage and increased up to 5% of EA content. For the properties of drying shrinkage, it shows decline tendency with an increase in SRA and EA content reiteratively. It alto reduces significantly with the combination of SRA-EA systems due to the combined effect of the admixture. In the scope of this paper, it is found that the use of SRA with 0.5％ and EA with 5% has optimum effects on the various properties of concrete. And under the combination of SRA and EA, it can reduce drying shrinkage about 37%.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.61-64
• /
• 2006

Comparing with traditional high performance concrete, ultra high performance concrete (UHPC) has the property of high-tenacity. However, drying shrinkage and autogenous shrinkage can be arisen as the major defect to UHPC. In this study, therefore, it was tested to reduce drying shrinkage and autogeneous shrinkage by adding expanding admixture (EA) and shrinkage reducing agent (SRA). As a result, for a case drying shrinkage, the shrinkage was decreased by 94% when EA was exchanged, and it was decreased by 64% when SRA was added. For the case of autogenous shrinkage, the mortar was expanded at early age and the shrinkage was decreased by 87% when EA was exchanged, and the shrinkage was decreased by 70% when SRA was added.

• 한국산학기술학회논문지
• /
• 제16권5호
• /
• pp.3535-3541
• /
• 2015

본 연구에서는 콘크리트의 건조수축을 저감하기 위한 연구의 일환으로 분말형 수축저감제와 플라이애쉬를 활용한 콘크리트의 건조수축 특성에 관한 일련의 실험을 수행하였다. 수축저감제와 플라이애쉬로 각각 2% 및 20%씩 시멘트를 대체한 배합에 대해, 강도 실험과 수축실험을 실시하였다. 역학적 특성은 목표 강도를 획득하는 것으로 확인되었고, 비구속 수축실험 결과 수축저감제가 약 $200{\mu}{\varepsilon}$의 건조수축 감소 효과를 발생시키는 것으로 나타났다. 링테스트에서는 수축저감제를 적용한 배합은 인장크리프 효과로 인해 균열 발생시기가 약 2배 정도 증가하였다.

• 콘크리트학회논문집
• /
• 제28권1호
• /
• pp.41-48
• /
• 2016

본 연구는 두 종류의 수축저감제를 혼입한 변형경화형 시멘트 복합체(SHCC)의 압축, 인장 및 휨 특성을 평가하기 위하여 계획되었으며, 재령과 수축저감제의 종류 및 혼입률을 변수로 진행되었다. SHCC는 설계기준압축강도 50 MPa이며, 섬유는 PVA 섬유를 2.2% 혼입하였다. 배합에 혼입된 수축저감제는 상변이 물질로 수화현상으로 발생되는 열을 흡수 또는 방출하여 급격한 수축 및 팽창을 제어하는 물질이다. 수축저감제의 혼입에 대한 영향은 선변형 길이변화 실험과 압축, 인장 및 휨 성능의 측면에서 평가되었으며, 수축저감제를 혼입할 경우 초기 재령에서의 수축량이 감소되었다. 또한 수축저감제를 혼입함에 따라 균열 분산 성능과 인장 및 휨 성능이 개선되었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.85-88
• /
• 2001

Utilization of demolished-concrete as recycled aggregate has been researched for the purpose of substituing for insufficient natural aggregate, saving resources and protecting environment. There, however, are some problems that qualities of recycled aggregates are not only largely diverse, but also mechanical properties of recycled aggregate concrete decrease a little in comparison with those of natural aggregate concrete. In this study, the resistance to freezing and thawing of recycled aggregate concrete was highly different due to adhered mortar on recycled aggregate, and durability factor of concrete with NA SRA and DRA was decreased more than that of control concrete. However, durability factor of concrete with AA SRA was larger than that of control concrete.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.647-650
• /
• 2005

This paper is to investigate the shrinkage properties of ultra high strength concrete(UHSC) incorporating $5\%$ of expansive additives(EA) along with $1\%$ of shrinkage reducing agent(SRA). UHSC subjected to steam curing and incorporated with steel fiber exhibited higher compressive strength than control UHSC by as much as50MPa at 7days, while at 28days, noticeable change in compressive strength was not observed between UHSC mixtures. Control UHSC subjected to steam curing had a $922{\times}10^6$ of autogenous shrinkage strain value, which was 6.7 times of drying shrinkage strain value at 42 days. The combination of EA and SRA resulted in a decrease in autogenous shrinkage by as much as half of control mixture. Steam curing contributed to the reduction of autogenous shrinkage by as much as $11\%$ compared with that of standard curing.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.707-710
• /
• 2004

This paper reported the results of mock-up test on mass concrete for transfer girder using setting time difference of super retarding agent(SRA). According to test results, two mock-up structures were made. Plain concrete without placing layer reached maximum temperature after 24hours since placement and caused surface hydration cracks at top section. However, concrete with placing layer reached maximum temperature after 72hours and surface temperature was higher than center temperature, which did not cause surface crack. After form removing, no crack was observed at side surface of plain concrete, while concrete using SRA at mid section had surface scaling and settling crack. According to coring results, concrete with placing layer had a penetration crack from top section to bottom section. Therefore, the setting time difference method to reduce hydration heat will have difficulty in applying the mass concrete for transfer girder.

• 콘크리트학회논문집
• /
• 제14권3호
• /
• pp.307-314
• /
• 2002

천연골재 부족현상의 해소, 자원절약 및 환경보존 등의 목적으로 폐콘크리트를 재생골재로 재활용하기 위한 연구가 진행되고 있으나, 재생골재의 품질변동이 클 뿐만 아니라, 재생골재 사용 콘크리트의 역학적 성질이 보통콘크리트와 비교하여 다소 떨어지는 문제점이 지적되고 있다. 본 연구에서는 폐골재 사용 콘크리트의 동결음해 저항성을 파악하기 위하여 실시한 일련의 실험결과를 요약하면 다음과 같다. 모재 및 폐골재에 부착된 모르타르량의 다소에 따라 재생골재의 품질이 크게 좌우되므로 파쇄공정의 개선이 매우 중요한 과제로 생각된다. 재생골재 사용 콘크리트의 압축강도는 보통콘크리트와 비교하여 큰 차이가 없었으나, 염화물 이온 침투성은 재생골재에 부착된 모르타르량 때문에 보통콘크리트보다 크게 떨어짐을 알 수 있었다. 재생골재 사용 콘크리트의 동결융해 저항성은 재생골재에 부착된 모르타르의 연행공기량에 따라 크게 상이하였으며, NA 모재 및 폐골재 사용 콘크리트의 내구성지수는 보통콘크리트에 비하여 월등히 떨어졌으나, AA 모재골재 사용 콘크리트는 오히려 큰 값임을 알 수 있었다. 그러므로 재생골재 사용 콘크리트의 동결융해 저항성을 향상시키기 위해서는 적정량의 연행공기를 포함한 재생골재의 사용이 반드시 요망된다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.193-194
• /
• 2023

This study attempted to derive an appropriate application range by reviewing the integration performance of joints according to the application range of SRA concrete. As a result, it was confirmed that the integration performance was improved even if SRA concrete was placed only by 75mm, which is 0.5 times the thickness of the member.