• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2007년도 하계학술대회 논문집
• /
• pp.208-210
• /
• 2007

This paper proposes a novel direct instantaneous pressure control(DIPC) of hydraulic pump system with SR drive. And it has very simple control structure, because it doesn’t use any speed and torque control for adjusting pump pressure. The hysteresis band of pressure and proper switching rules can make the actual pump pressure to be constant with fast dynamic response. Therefore, the proposed DIPC method can control of hydraulic pump pressure steadily with fast dynamic response.

• 대한화학회지
• /
• 제47권6호
• /
• pp.614-618
• /
• 2003

고상반응으로 $Sr_2Ru_{1-x}Cu_xO_{4-y}(0.0{\le}x{\le}0.5)$ 화합물을 합성하였다. X-선 회절 분석 결과에 대한 Rietveld 정밀화로부터 합성된 $Sr_2Ru_{1-x}Cu_xO_{4-y}$ 화합물은 $0{\le}x{\le}0.30$의 Cu 치환 범위에서는 모두 단일상의 정방정계 구조를 갖는 $K_2NiF_4$ 형태의 구조를 취하지만, $0.4{\le}x{\le}0.5$의 범위에서는 미량의 $Sr_2CuO_3$ 화합물의 회절 피이크가 관찰되는 이중상을 갖는 화합물로 존재한다는 사실을 알 수 있었다. $Sr_2RuO_4$ 화합물의 Ru자리에 Cu 이온을 부분적으로 치환할 때의 전이금속 이온인, Ru와 Cu이온의 원자가 상태는 X-선 전자 분광법으로 확인하였다. $Ru\; 3p_{3/2}$ 전자와 $Cu\; 2p_{3/2}$ 전자의 결합에너지 측정으로부터 $Ru^{4+},\;Cu^{2+}$를 갖는 것으로 확인되었다. $Sr_2RuO_4$ 화합물의 Ru 자리에 치환하는 Cu 이온의 농도를 증가할수록 $Ru-O1({\times}4)$ 와 $Ru-O_2({\times}2$)의 결합길이 차이가 ${\Delta}=0.1329 {\AA}Sr_2RuO_4$ 경우)에서 ${\Delta}=0.0383 {\AA}(Sr_Ru_{0.7}Cu_{0.3}O_{4-y}$ 경우)으로 변하며, c/a 역시 감소하는 경향을 나타내고 있다. 따라서, $Sr_2RuO_4$ 화합물의 Ru 자리에 Cu 이온을 치환함에 따라 $RuO_6$ 팔면체의 국부 대칭성의 변화에 의해 결정구조가 정방정계로의 변화를 수반하면서, 이에 따른 $Sr_2Ru_{1-x}Cu_xO_{4-y}$의 전달특성이 금속에서 반도체로 변화한다.

• 한국광물학회:학술대회논문집
• /
• 한국광물학회.한국암석학회 2001년도 공동학술발표회 논문집
• /
• pp.75-75
• /
• 2001

We report Sr, Nd and Pb isotope data of clinopyroxene separates from ultramafic xenoliths and their host basaltic rocks in Jeju Island, Baekryeong Island, Boeun and Ganseong, Korea. The isotopic data of the xenoliths and host basalts are distinctly different from those of Korean basement rocks. Except for two xenoliths from Ganseong, all samples in this study have isotopic ratios within the combined range of MORB-OIB data. All basaltic rocks have Nd-Sr-Pb isotope compositions different from those of xenoliths, indicating that the host basaltic magma did not derive from the lithospheric mantle where the xenoliths originated. The range of isotopic composition of xenoliths is much greater than that observed in host basalts, which reflects small-scale heterogeneity of the lithospheric mantle. The greater isotopic heterogeneity of the lithospheric mantle probably reflects its long-term stability. The spinel peridotite xenolith data of Jeju Island, Baekryeong Island and Boeun display mixing hyperbolas between DMM and EM II end members. Since Jeju basalts have EM II-like isotopic signature, the mixing relationship shown by the isotopic data of the Jeju xenoliths can be interpreted as the result of infiltration of metasomatic fluid or melt derived from basaltic magma into DMM-like lithospheric mantle. In contrast to other xenolith sites, the Ganseong xenoliths are dominantly clinopyroxene megacryst and pyroxenite. Clinopyroxene megacrysts have different isotopic ratios from their host basalt, reflecting its exotic origin. Two Ganseong xenoliths (wherlite and clinopyroxenite) have much enriched Sr and Nd isotopic ratios and Nd model ages of 2.5-2.9 Ga, and plot in an array away from the MORB-OIB field. The mantle xenoliths from Korean Peninsula have similar $\^$87/Sr/$\^$86/Sr,$\^$143/Nd/$\^$144/Nd and $\^$207/Pb/$\^$204/Pb ratios to, but higher $\^$208/Pb/$\^$204/Pb ratios than, those from eastern China, indicating that Korean xenoliths are derived from the lithospheric mantle with higher Th/U ratio compared with Chinese ones. The isotopic data of xenolith-bearing basalts of Baekryeong Island and Ganseong, along with Ulreung and Dok Islands, show a mixing trend betlveen DMM and EM I in Sr-Nd-Pb isotopic correlation diagrams, which is also observed in tile northeastern Chinese basalts. However, the Jeju volcanic rocks show an EM II signature that is observed in southeastern Chinese basalts. The isotopic variations in volcanic rocks from the northern and southern portions of the East Asia reflect a large-scale isotopic heterogeneity in their source mantle.

• 전기학회논문지
• /
• 제58권3호
• /
• pp.486-495
• /
• 2009

This paper proposes a new methodology on reliability evaluation of a power system including solar cell generators (SCG). The SCGs using renewable energy resource such as solar radiation(SR) should be modeled as multi-state operational model because the uncertainty of the resource supply may occur an effect as same as the forced outage of generator in viewpoint of adequacy reliability of system. While a two-state model is well suited for modeling conventional generators, a multi-state model is needed to model the SCGs due to the random variation of solar radiation. This makes the method of calculating reliability evaluation indices of the SCG different from the conventional generator. After identifying the typical pattern of the SR probability distribution function(pdf) from SR actual data, this paper describes modelling, methodology and details process for reliability evaluation of the solar cell generators integrated with power system. Two test results indicate the viability of the proposed method.

• 한국세라믹학회지
• /
• 제25권6호
• /
• pp.639-644
• /
• 1988

The physical and dielectric properties of complex perovskite compound Sr(Mg1/3Nb1/3)O3-Ba(Mg1/3Nb2/3)O3-Ba(Mg1/3Ta2/3)O3(BMT) system were investigated as a function of composition. As the mole ratio of BMN was increased, lattice parameter ratio c/a was slightly increased, and density was increased in SMN-BMN system. However, in BMN-BMT system, lattice parameter ratio c/a and density were decreased with increasing the mole ratio of BMN. Dielectric constant, dielectric loss at $25^{\circ}C$ and 100kHz, and temperature coefficient of resonant frequency, the dependence of temperature in capacitance were increased with increasing the mole ratio of BMN in SMN-BMN-BMT system. These result can be explained according to the degree of order=disorder and dielectric constant.

• Nuclear Engineering and Technology
• /
• 제51권7호
• /
• pp.1828-1834
• /
• 2019

The performance of a plastic scintillator for use in an in situ measurement system was analyzed using simulation and experimental methods. The experimental results of four major pure beta-emitting radionuclides, namely $^3H$, $^{14}C$, $^{32}P$, and $^{90}Sr/^{90}Y$, were compared with those obtained using a Monte Carlo N-particle (MCNP) code simulation. The MCNP simulation and experimental results demonstrated good agreement for $^{32}P$ and $^{90}Sr/^{90}Y$, with a relative difference of 1.95% and 0.43% between experimental and simulation efficiencies for $^{32}P$ and $^{90}Sr/^{90}Y$, respectively. However, owing to the short range of beta particles in water, the efficiency for $^{14}C$ was extremely low, and $^3H$ could not be detected. To directly measure the low-energy beta radionuclides considering their short range, a system where the source could flow directly to the scintillator was developed. The optimal thickness of the plastic scintillator was determined based on the suggested diameter. Results showed that the detection efficiency decreases with an increase in the depth of the water. The detection efficiency decreased drastically to approximately 10 cm, and the tendency was gradually constant.

• 한국분말재료학회지
• /
• 제15권5호
• /
• pp.399-404
• /
• 2008

Spray pyrolysis was applied to prepare $M_{3}MgSi_{2}O_{8}:Eu^{2+}$ (M=Ca, Sr, Ba) blue phosphor powder. The library of a Ca-Sr-Ba ternary system was obtained by a combinatorial method combined with the spray pyrolysis in order to optimize the luminescent property under vacuum ultraviolet (VUV) excitation. 10 potential compositions were chosen from the first screening. The emission shifted to longer wavelength as Ca became a dominant element and the emission intensity was greatly reduced in the composition region at which Ba is dominant element. On the base of the first screening result, the second fine tuning was carried out in order to optimize the luminescence intensity under VUV excitation. The optimal composition for the highest luminescence intensity was $(Ca_{1.7},\;Sr_{0.3},\;Ba_{1.0})Si_{2}O_{8}:Eu^{2+}$ which had the color coordinate of (0.152, 0.072) and about 64% emission intensity of $BaMgAl_{10}O_{17}$ (BAM) phosphor.

• 한국환경과학회지
• /
• 제24권3호
• /
• pp.267-274
• /
• 2015

The feasibility of PS-D2EHPA/TBP beads prepared by immobilizing two extractants D2EHPA and TBP in polysulfone to remove Sr(II) from aqueous solution was investigated in batch system. Batch experiments were carried out to study equilibrium isotherms, kinetics, and thermodynamics. Equilibrium data were fitted using Langmuir, Freundlich, Redlich-Peterson, and Dubinin-Radushkevich equation models at temperatures of 298 K, 313 K, and 328 K. The removal capacity of Sr(II) by PS-D2EHPA/TBP beads obtained from Langmuir model was 2.41 mg/g at 298 K. The experimental data were well represented by pseudo-second-order model. The removal process of Sr(II) by PS-D2EHPA/TBP beads prepared in this study was found to be feasible, endothermic, and spontaneous.

• Safety and Health at Work
• /
• 제4권3호
• /
• pp.149-155
• /
• 2013

Background: Stochastic resonance whole-body vibration training (SR-WBV) was tested to reduce work-related musculoskeletal complaints. Methods: Participants were 54 white-collar employees of a Swiss organization. The controlled crossover design comprised two groups each given 4 weeks of exercise and no training during a second 4-week period. Outcome was daily musculoskeletal well-being, musculoskeletal pain, and surefootedness. In addition, participants performed a behavioral test on body balance prior to when SR-WBV started and after 4 weeks of SR-WBV. Results: Across the 4-week training period, musculoskeletal well-being and surefootedness were significantly increased (p < 0.05), whereas musculoskeletal pain was significantly reduced only in those who reported low back pain during the last 4 weeks prior to the study (p < 0.05). Body balance was significantly increased by SR-WBV (p < 0.05). Conclusion: SR-WBV seems to be an efficient option in primary prevention of musculoskeletal complaints and falls at work.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.337-340
• /
• 1999

Since the first reports of CMR(colossal magnetoresistance) effects in some single crystal R-P Phase Ln$_{1-x}$ Sr$_{2-x}$Mn$_{2}$O$_{7}$ 1996. many researches have been carried out to find optimum compositions and processing conditions in this system. In this study, layered perovskite R-P Phase Ln$_{1-x}$ Sr$_{2-x}$Mn$_{2}$O$_{7}$ (x=0.4, Ln=-La, Eu, Gd, Nd, Pr, Sm) phases were synthesized by solid state reaction and their structures were refined by Rietveld method. Electrical and magnetic properties were measured drown to 20K and compare with those of R-P Phase Ln$_{1-x}$ Sr$_{2-x}$Mn$_{2}$O$_{7}$ Phases.es.es.es.es.es.