• Nuclear Engineering and Technology
• /
• v.18 no.3
• /
• pp.200-208
• /
• 1986

The loss of coolant accident based on a double-ended cold leg break is analyzed with the discharge coefficient (Ca) of 0.4. This analysis covers the whole transient period from the start of depressurization to the complete refilling of the core by using RELAP4/MOD6-EM and RELAP4/ MOD6-HOT CHANNEL for the system thermal-hydraulics and the fuel performance during the blowdown phase respectively, and RELAP4/MOD6-FLOOD and TOODEE2 during the reflood phase. A simple analytical method has been developed to account for the lower plenum filling by approximating steam-water countercurrent flows and superheated wall effects at the downcomer during the refill period. Based on the informations. at the time of EOB (end-of-bypass), the refill duration time and the initial reflooding temperature were estimated and compared with the results from the RELAP4/MOD6, resulting in a good agreement. In addition, some parametric studies on the EOB were performed. The form loss coefficient between upper head and upper downcomer was found to be sensitive to the occurrence of the spurious EOB. Appropriate form loss coefficients should be taken into account to avoid the flow oscillations at the downcomer. The analyses with the six and three volume core nodalizations, respectively, show much similar trends in the system thermal-hydraulic performance, but the former case is recommended to obtain good results.

• Journal of Korea Water Resources Association
• /
• v.42 no.12
• /
• pp.1079-1089
• /
• 2009

The objective of this study is to develop the accurate, robust and high resolution two-dimensional numerical model that solves the computationally difficult hydraulic problems, including the wave front propagation over dry bed and abrupt change in bathymetry. The developed model in this study solves the conservative form of the two-dimensional shallow water equations using an unsplit finite volume scheme and HLLC approximate Riemann solvers to compute the interface fluxes. Bed-slope term is discretized by the divergence theorem in the framework of FVM for application of unsplit scheme. Accurate and stable SGM, in conjunction with the MUSCL which is second-order-accurate both in space and time, is adopted to balance with fluxes and source terms. The exact C-property is shown to be satisfied for balancing the fluxes and the source terms. Since the spurious oscillations in second-order schemes are inherent, an efficient slope limiting technique is used to supply TVD property. The accuracy, conservation property and application of developed model are verified by comparing numerical solution with analytical solution and experimental data through the simulations of one-dimensional dam break flow without bed slope, steady transcritical flow over a hump and two-dimensional dam break flow with a constriction.

• Journal of Korean Society of Transportation
• /
• v.34 no.1
• /
• pp.95-106
• /
• 2016

Air transportation demand is consistently increasing in Korea due to economic growth and low cost carriers. For this reason, airport expansion plans are being discussed in Korea. Therefore, it is essential to forecast reliable air transportation demand with adequate methods. However, most of the air transportation demand models in Korea has been developed by simple regression analysis with several dummy variables. Simple regression analysis without considering stationarity of time-series data can bring spurious outputs when a direct causal relationship between explanatory variables and dependent variable does not exist. In this paper, econometric model were developed for air transportation demand based on stationarity in time-series data. Unit root test and co-integration test are used for testing hypothesis of stationarity.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.12 s.354
• /
• pp.47-54
• /
• 2006

This work proposes a dual-channel 6b 1GS/s ADC for ultra wide-band communication system applications. The proposed ADC based on a 6b interpolated flash architecture employs wide-band open-loop track-and-hold amplifiers, comparators with a wide-range differential difference pre-amplifier, latches with reduced kickback noise, on-chip CMOS references, and digital bubble-code correction circuits to optimize power, chip area, and accuracy at 1GS/s. The ADC implemented in a 0.18um 1P6M CMOS technology shows a signal-to-noise-and-distortion ratio of 30dB and a spurious-free dynamic range of 39dB at 1GS/s. The measured differential and integral non-linearities of the prototype ADC are within 1.0LSB and 1.3LSB, respectively. The dual-channel ADC has an active area of $4.0mm^2$ and consumes 594mW at 1GS/s and 1.8V.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.12 no.1
• /
• pp.1-11
• /
• 2009

Rapid visualization of flood area of downstream according to the dam effluent in flood season is very important in dam management works. Overlay zone of river bight should be removed to represent flood area efficiently based on flood stage which was modeled in river channels. This study applied drainage enforcement algorithm to visualize flood area considering river bight by coupling Coordinate Operation System for Flood control In Multi-reservoir (COSFIM) and Flood Wave routing model (FLDWAV). The drainage enforcement algorithm is a kind of interpolation which gives to advantage into hydrological process studies by removing spurious sinks of terrain in automatic drainage algorithm. This study presented mapping technique of flood area layer considering river bight in Namgang-Dam downstream, and developed system based on Arcobject component to execute this process automatically. Automatic extraction system of flood area layer could save time-consuming efficiently in flood inundation visualization work which was propelled based on large volume data. Also, flood area layer by coupling with IKONOS satellite image presented real information in flood disaster works.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.6 s.109
• /
• pp.519-528
• /
• 2006

This thesis is regarding of fabricating wibro PAM. First of all, we need to set specification based on link budget for wibro communication circumstance in order to develop PAM, then we decided specification concerning of wibro PAM by considering TTAS_Ko_06_0082R1 which is standarded in Korea, and IEEE Std. 802. 16d/e which is international standard. We selected the Doherty structure to increase efficiency, and pre-distorter structure to increase linearity. The fabricated PAM has not only a result of $26.5dB{\pm}1.0dB$ gain characteristics and maximum of -14 dB return loss characteristics in full frequency bands and full output ranges, but also a result of 37 dBc at 4 tone IMD characteristics which is improved result of 843 and a result of 31 dBc spurious characteristics which is improved result of 5 dB at 4.77 MHz offset point in status of having 27 % efficiency in the 26 dBm high power amplifier output signal. We confirmed the suggested structure is better than others by comparing with normal structure, balanced structure and Doherty structure without predistorter.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.10
• /
• pp.1031-1041
• /
• 2009

A small microstrip monopole antenna for macro-micro frequency tuning over multiple bands is presented. The meander-shape antenna is fabricated on a conventional printed circuit board(FR-4, $\varepsilon_r=4.4$ and tan $\delta=0.02$). The antenna operates over WiBro(2.3~2.4 GHz) and WLAN a/b(2.4~2.5 GHz/5.15~5.35 GHz) service bands with an essentially constant antenna gain within each service band. Two diodes, a PIN diode and a varactor, are embedded into the antenna for frequency reconfiguration. The PIN diode is used for frequency switching(macro-tuning) between 2 GHz and 5 GHz bands while the varactor is used for frequency tuning(micro-tuning) within the service bands, 2.3~2.5 GHz and 5.15~5.35 GHz. Unwanted resonances between the two frequency bands(2 GHz and 5 GHz) are suppressed by filling up the gaps between the meander lines. The antenna gain is essentially constant and higher than 2 dBi within each service band. The measured performance of the proposed antenna system suggests the macro-micro frequency tuning techniques be useful in reconfigurable wireless communication systems.

• International Commerce and Information Review
• /
• v.13 no.3
• /
• pp.77-95
• /
• 2011

This paper investigates the relationship between export and economic variables such as trade insurance, world economy activity, relative price, unemployment rate, exchange rate volatility, using monthly data. I employ Johansen cointegration methodology since the model must be stationary to avoid the spurious results. The results indicate that there is a long-run relationship between export and variables. Also, the empirical analysis of cointegrating vector using the CCR, DOLS, FMOLS reveals that the increases of trade insurance has positive relations and the increases of exchange rate volatility have negative relations with export. Especially, DOLS based on Monte Carlo simulations, of this estimator being superior in small samples compared to a number of alternative estimators, as well as being able not only to accommodate higher orders of integration but also to account for possible simultaneity within regressors of a potential system. This paper also applies impulse-response functions to get the additional information regarding the responses of the export to the shocks of the variables. The result indicates that export positively to trade insurance and then decay fast compare with exchange rate volatility. Consequently, trade insurance plays the role of trade policy for export promotion in Korea. Whereas, increase of exchange risk result in reduction of export. Therefore, the support of trade insurance should be expanded and the stabilization of the foreign exchange market must be done for the export promotion.

• Journal of Biomedical Engineering Research
• /
• v.19 no.5
• /
• pp.511-518
• /
• 1998

In order to develop the aerosol bolus technique which is thought to be a potential tool for probing geometries or abnormalities of small airways, an experimental system of measuring fast time variations of particle concentration in the inhaled and exhaled breathing air was developed. The system generates monodisperse sebacic acrid particles of 1 micron size and 1.2 of geometric standard deviation in high concentration of $10^8$ particles/cc, delivers a short pulse of particles at the controlled instant during inhalation using a solenoid valve, and measures the fast change of particle concentration in using the laser light scattering. Successful operation of the generator and the measuring system was confirmed by smooth concentration profiles in inhalation. It was also confirmed that maintaining a constant breathing rate is essential to stable outputs and any disturbance in flow rate near the mode (maximum concentration) induces a large number of spurious peaks in the exhalation. Experimental data without strict control of breathing flow rate showed a substantial amount of scatter. The measured results showed an improvement in scatter over the existing results. When compared with theoretical predictions from 1-D convective diffusion equation and other experiments, general characteristics of dispersion for several penetration depths showed a good agreement, but there exists some difference in absolute values, which is attributed to the difference in body conditions. Improvements are needed in the theory, especially in relation to correcting for the effect of breathing flow rate.

• The KIPS Transactions:PartB
• /
• v.17B no.4
• /
• pp.295-302
• /
• 2010

Example-based super resolution(EBSR) is a method to reconstruct high-resolution images by learning patch-wise correspondence between high-resolution and low-resolution images. It can reconstruct a high-resolution from just a single low-resolution image. However, when it is applied to a text image whose font type and size are different from those of training images, it often produces lots of noise. The primary reason is that, in the patch matching step of the reconstruction process, input patches can be inappropriately matched to the high-resolution patches in the patch dictionary. In this paper, we propose a new patch matching method to overcome this problem. Using an image observation model, it preserves the correlation between the input and the output images. Therefore, it effectively suppresses spurious noise caused by inappropriately matched patches. This does not only improve the quality of the output image but also allows the system to use a huge dictionary containing a variety of font types and sizes, which significantly improves the adaptability to variation in font type and size. In experiments, the proposed method outperformed conventional methods in reconstruction of multi-font and multi-size images. Moreover, it improved recognition performance from 88.58% to 93.54%, which confirms the practical effect of the proposed method on recognition performance.