• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.21 no.1
• /
• pp.61-69
• /
• 2003

There is various kinds cause that influence to created DEM and orthoimage using stereo satellite images. Specialty, research about effect that GCP number gives to accuracy of DEM, orthoimage and modeling may have to be gone ahead. Therefore, this research increases GCP number by 5 to 30 and created each modeling, DEM and orthoimage using SPOT panchromatic images that resolution is 10m by digital image processing method. Accuracy assessment did by orthoimage using 20 check point. As a result, GCP number between 10∼30 modeling RMSE is 1 pixel low appear. Horizontal·vertical error that use orthoimage looked tendency that decrease GCP number increases, and confirmed by the most economical in GCP number 10∼15. Also, analyze correlation of GCP number and orthoimage position accuracy and presented improvement plan and research task hereafter.

• Journal of Ocean Engineering and Technology
• /
• v.29 no.1
• /
• pp.45-55
• /
• 2015

Because of the high stress concentration near the toe of a welded joint, the calculation of local stress using the finite element method which is relevant to the fatigue strength of the weld toe crack, is a challenging task. This is mainly caused by the sensitivity of finite element analysis, which usually occurs near the area of a dramatically changing stress field. This paper presents a novel numerical method through which a less mesh-sensitive local stress calculation can be achieved based on the 3D solid finite element, strictly sticking to the original definition of hot spot stress. In order to achieve the goal, a traction stress, defined at 0.5t and 1.5t away from the weld toe, was calculated using either a force-equivalent or work-equivalent approach, both of which are based on the internal nodal forces on the imaginary cut planes. In the force-equivalent approach, the traction stress on the imaginary cut plane was calculated using the simple force and moment equilibrium, whereas the equivalence of the work done by both the nodal forces and linearized traction stress was employed in the work-equivalent approach. In order to confirm the validity of the proposed method, five typical welded joints widely used in ships and offshore structures were analyzed using five different solid element types and four different mesh sizes. Finally, the performance of the proposed method was compared with that of the traditionally used surface stress extrapolation method. It turned out that the sensitivity of the hot spot stress for the analyzed typical welded joints obtained from the proposed method outperformed the traditional extrapolation method by far.

• Asian Journal of Turfgrass Science
• /
• v.13 no.1
• /
• pp.55-66
• /
• 1999

Effect of an antagonistic bacterium AF-2001, Pseudomonas cepacia, on control of turfgrass diseases as brown patch, Pythium blight, dollar spot, and large patch were evaluated in vitro and in vivo. Results obtained in this study are summarized as follows. 1. Pseudomonas cepacia AF-2001 showed antagonism against to the pathogens causing brown patch, Pythium blighe, dollar spot and large patch. Especially, the biological agent showed strong antagonistic effect on the causal pathogens of brown patch, dollar spot, and anthracnose, but weak on Pythium blight 2. Populotion density of P. cepacia AR-2001 decreased ra;idly in turfgrass soils. Initial population of the agent was 2.4$\times$107 cfu/g soil, however, decreased to 1.4$\times$103, 6$\times$102 and 0 cfu/g soil on 10, 20, and 30 days after application, respectively. 3. Under the controlled controlled conditions of $27^{\circ}C$ and 95% RH, P. cepacia AR-2001 showed 100% control efficacy on brown patch either by pre-treatment or post-treatment of infection. However, Pythium blight was controlled about 94% by pre-treatment and only 29% by post-treatment 4. In field trials, P. cepacia AF-2001 did not suppress large patch and the control efficacy on other turfgrass diseases was lower than agro-chemicals such as tebuconazole and metalaxyl. Control efficacy of brown patch, Pythium and dollar spot by the biological agent was 57.4%, 40.4%, 61.5~87%, respectively. 5. Growth, color and texture of creeping bentgrass were not differ significantly between AF-2001 treatment and untreated control.

• Korean Journal of Agricultural Science
• /
• v.42 no.3
• /
• pp.231-235
• /
• 2015

This study was performed to investigate the change of the body surface temperature during socialization of weaning pigs. A total of 108 piglets (Landrace 60 and Yorkshire 48) aged 31 (${\pm}1.1$) day was used for this study. Experiment was designed as follows; familiar group (T1), randomly mixed with unfamiliar piglets (T2), mixed based on weight of unfamiliar piglet (T3). The transport and mixing of pigs were performed at 10:00, and then body surface temperature was taken by thermo-graphic camera after 4 hours (14:00). Average surface temperature and hot-spot-temperature, which is the hottest spot of the body surface, were analyzed using Testo IRsoft 3.1 software. Average temperature of body surface were 36.0, 38.2, and 37.5 in T1, T2, and T3, respectively. Average of body surface temperature in T2 and T3 were higher (p<0.001) than T1, and average temperature of body surface of T3 was greater (p<0.001) than that of T2. The hot-spot-temperature of T1, T2, and T3 were 38.7, 39.5, and 39.6, respectively. The hot-spot-temperature of T2 (p<0.01) and T3 (p<0.001) were significantly higher than that of T1. Above results demonstrate that grouping unfamiliar pigs leads to increase in the body temperature possibly by pigs aggressive behavior during social conflict. By the result on average body temperature, this study suggests that the mixing with similar body weight would increase the struggle time and frequency.

• Journal of Welding and Joining
• /
• v.32 no.5
• /
• pp.44-49
• /
• 2014

The effect of weldbond hybrid joining process on the mechanical behavior of single lap and L-tensile joints was investigated for the newly developed 1.2GPa grade ultra high strength TRIP(transformation induced plasticity) steel. In the case of single lap shear behavior, the weldbond joint of 1.2GPa TRIP steel showed lower maximum tensile load and elongation than that of the adhesive bonding only. It was considered to be due to the reduction of real adhesion area, which was caused by the degradation of adhesive near the spot weld, and the brittle fracture behavior of the spot weld joint. In the case of L-tensile behavior, however, the maximum tensile load of the weldbond joint of 1.2GPa TRIP steel was dramatically increased and the fracture mode was change to the base metal fracture which is desirable for the spot weld joint. These synergic effect of the weldbond hybrid joining process in 1.2GPa TRIP steel was considered to be due to the stress dissipation around the spot weld joint by the presence of adhesive which resulted in the change of crack propagation path.

• Journal of the Korean Society of Safety
• /
• v.32 no.5
• /
• pp.141-148
• /
• 2017

Over the past 30 years, the business effects of the improvement project at black spot have been decreasing since 2010, with a reduction in the amount of government spending, coupled with proposing a uniform improvement plan. In order to promote more efficient improvement projects, it is necessary to evaluate the efficiency of local governments and improve the business methods of local governments with low efficiency. However, more sophisticated efficiency analysis methods are needed. Because in previous studies have been limited to the analysis of effects before and after the project through the simple before-after analysis. For this purpose, this study analyzed the efficiency of improvement project at black spot by local governments in Gyeonggi-do using DEA to compare and analyze efficiency in various fields. As a result, Goyang, Seongnam, Paju, Hanam and Yangju showed high efficiency local governments. For local governmetns with low efficiency, the improvement projets to improve efficiency were divided into civil engineering work, structure work, pavement work, additional work and transportation work, and the appropriate construction ratios of each local government were analyzed and presented.

• Korean journal of applied entomology
• /
• v.23 no.1 s.58
• /
• pp.7-14
• /
• 1984

Recently, a symptom similiar to black spot caused by Alternaria kikuchiana on the pear leaves is prevailing in Naju, Chonnam Province. This experiment was conducted in order to clarify causal agent and to survey present status on it. Disease lesions on the leaves were brown or black brown in color, circle or irregular circle in shape, $2\~6mm$ in diameter, and faintly zonal. Central part of lesions was gradually changed to greyish-white. The causal fungus was identified as Alternaria kikuchiana Tanaka causing black spot of pear reported previously on variety I-sib-se-gi (Nijisseki) of pear. However, this disease differed from that of typical black spot reported already in some aspects; It occurred more highly on matured leaves than on young ones. And it occurred severely in varieties Shin-heung, Shin-ko, Man-sam-gil(Okusankichi) etc. which have been reported as resistant varieties, while slightly in varieties Cho-ok(Hayadama), Park-da-cheung (Hakadahare) etc. which have been known as susceptible ones. From the results described above, it is considered that this disease is due to the differentiation in pathogenicity of Alternaria kikuchiana Tanaka in that area.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.20 no.6
• /
• pp.1-10
• /
• 2016

For the active control of a combustion instability, a change should be made in pressure fluctuation or heat release fluctuation using an acoustic driver or a secondary fuel injection. Also, to determine the location and timing of a secondary fuel injection, one needs to know the distribution of heat release fluctuation under combustion instability. In the present research, the distribution of heat release fluctuation has been experimentally measured by changing hydrocarbon fuel, inlet velocity, equivalence ratio, and acoustic forcing condition. It was confirmed that heat release fluctuation with regards to vortex shedding was significantly affected by the $Damk{\ddot{o}}hler$ number. Under the cases of the $Damk{\ddot{o}}hler$ number above approximately 4 - 5, hot spot region was generated in the leading edge of vortex and cold spot region was in the trailing edge. On the contrary, the cases of the $Damk{\ddot{o}}hler$ number below 3 showed the opposite trend.

• Journal of Ginseng Research
• /
• v.27 no.4
• /
• pp.188-194
• /
• 2003

Rust-spot on North American ginseng roots (Panax quinquefolius L.) is considered a physiological, not a pathological disorder. Ginseng rust-spot starts as an orange spot on the surface of the root and may spread forming a sunken, round to irregular lesion. 5 mm in diameter. Pieces of root, 7 mm in length and containing a rust-spotted lesion, were embedded in agar and sectioned using a vibratome. These sections and hand sections, cut with a two-sided razor blade, were examined using fluorescence microscopy. The 4-5 cell layers of the periderm were destroyed in the area of the lesion and orange substance:, were deposited in and around the lesion. Sections stained with vanillin-HCI and viewed using bright field microscopy confirmed that the orange substances were phenolic compounds. Scanning electron micros-copy showed that the periderm had pulled away from the root, or was completely destroyed, in the area of the lesion. The smooth surface of the lesion indicates the deposition of phenolic compounds in surrounding cells as a wound response. Roots sprayed or dipped in ethephon (1500 mgㆍL$^{-1}$ ) developed rust-spots, more so at 21$\pm$2$^{\circ}C$ than at 3$\pm$0.2$^{\circ}C$. Roots held at 21$\pm$2$^{\circ}C$ were yellowish and developed white cell proliferations. Comparable control roots also developed rust-spots likely due to the high undecomposed organic matter content of the incubation soilless mix.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.12 no.1
• /
• pp.21-28
• /
• 2006

Peroxidase activity was measured in brown leaf spot pathogen (Myrothecium roridum) inoculated potted mulberry (Morus alba) during pre-symptomatic to various symptom development stages and compared with corresponding healthy leaf tissues. The enzyme showed a pH optimum of 7.0 and the activity was linearly increased up to 15 min of incubation. The peroxidase had a broad substrate specificity and the rates of oxidation were in the rank of pyrogallol> guaiacol> ascorbate at pH 7.0. Catechol at 10 mM inhibited 89% of guaiacol-peroxidase and 76% pyrogallol-peroxidase activities, indicated higher non-specific peroxidation in pyrogallol dependent assay system in mulberry than guaiacol. The optimum requirement for the guaiacol dependent assay was 0.2 ml (${\approx}40-60{\mu}g$ equivalent of protein) of crude enzyme source. Excepting the 8th leaf from the apex, the peroxidase activity did not vary appreciably in different leaf positions. In pre-symptomatic phases, an initial (1 to 5 min) rise of peroxidase activity was noticed in inoculated leaves, and then maintained a plateau up to 300 min. In contrary, non-infected tissue showed a slightly increased trend of enzyme level up to 420 min. In infected tissue, a sharp transient increase (3.1 fold) of peroxidase activity appeared between 300 - 420 min post infections. Afterwards, significantly different but steady maintenance of enzyme levels were observed in two treatments. On the other hand, during symptom development, a sharp increase in peroxidase activity was noticed up to 4th grade of lesion appearance (25.1 % to 50% of leaf area infection), and then declined slightly. However, in non-infected but same age healthy leaves, such huge fluctuations of enzyme level did not apparent. A high positive correlation $(R^2=0.92)$ between peroxidase activity and leaf spot development grades was also marked. The result implies that pre-symptomatic burst (between 1 - 5 and 300 - 420 min) and subsequent increased trend of guaiacol peroxidase activity may require for the symptomatic manifestation of Myrothecium leaf spot in mulberry.