• 만화애니메이션 연구
• /
• 통권17호
• /
• pp.53-67
• /
• 2009

최근 미디어법의 변화에 따라, 방송의 규제 환경이 시장의 힘에 의해 점차 완화되고, 방송과 통신이 융합된 새로운 테크놀러지의 개발로 방송 산업이 무한 경쟁 시대로 접어들었다. 이러한 변화와 문제점을 해결하고자 최근 방송사에서는 차별화된 자사의 채널을 홍보하기 위해 새로운 채널 브랜드 아이덴티티 작업을 시도 하고 있다. 본 연구의 목적은 채널 브랜드 아이덴티티의 다양한 구성 요소(브랜드네임, 로고와 심벌, 캐릭터, 슬로건, 네트워크 디자인, 스테이션 ID)들 중에 가장 많이 제작되어 활용되고, 특히 시청자들에게 쉽게 노출되어, 접근성이 빠른 Spot Animation에 대해 분석하고, Spot Animation에 사용되는 캐릭터에 대한 확장성과 그 유용성을 검토하여 시청자의 채널인지도와 채널 충성도를 높일 수 있는 캐릭터를 기획하고 관리 하는데 있다. 구체적으로 KBS와 MBC 각 방송사를 대표하는 각각의 캐릭터의 탄생 배경과 제작 및 활용을 알아보고 두 방송사의 Spot animation에 등장하는 각 캐릭터의 형태, 색상, 재질, 표현 등을 비교하여 특성을 정리한다. 결론으로, KBS와 MBC의 세 가지 캐릭터는 전문적이고 체계적인 기획과 관리가 적용되지 못하였고, ID의 Spot animation에서 각 채널이 추구하는 이미지만을 표현했을 뿐, 캐릭터로서의 다양한 확장성과 넓은 유용성을 충분히 관철하지 못했다는 문제점을 가지고 있다. 방송사의 채널 브랜드 가치를 높이는 가장 중요한 요소는 차별화된 아이덴티티를 가지는 것이고, 그 핵심에는 채널의 이미지를 담당하는 스테이션 ID를 효과적으로 만드는데 있다. 따라서 시청자에게 가장 많이 노출되고 쉽게 접근할 수 있는 ID의 Spot animation과 캐릭터는 매우 중요한 요소로서, 방송사를 대표하는 캐릭터는 초기 기획과 제작에 이르기까지 전문적인 연구와 체계적인 관리가 필요하다.

• 전자공학회논문지B
• /
• 제30B권1호
• /
• pp.29-37
• /
• 1993

The purpose of this paper is to estimate the attitude and the position of SPOT satellite which are needed in producing DEM(Digital Elevation Model) using SPOT satellite image pairs. DEM extraction is consists of three parts. First part is the modeling of satellite position and atitude, second part is the matching of two images to find corresponding point of them and third part is to calculate the elevation of each point by using the result of the first and second part. For modeling inaccessible area, extended modeling algorithm which removes the GCP(Ground Control Point) most errorneous from the GCPs extracted from map iteratively is proposed According to the experiments using a collinearity equation, the second order polynomials are shown to the optimal for .omega.(pitch), and Zs parameters while the first order ones for .kappa.(yaw) .PHI.(roll), Xs, and Ys parameters. The input images used in this paper are 6000*6000 level 1A panchromatic digital SPOT images of Chungchong-do, Korea. With 30 GCPs, experiments on SPOT images show that the planimetric and altimetric RMS errors are 7.11m and 7.10m, respectively, for test points.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 추계학술대회 논문집 학회본부
• /
• pp.115-118
• /
• 1991

The temperature distribution on the superconducting thin-film is analyzed as moving constant field is applied above upper critical field. The distribution of magnetic field is derived in the normal spot. Governing equation is obtained with the help of the equation of conservation of energy. The temperature distribution and the heat dissipation are obtained through computer simulation by the method of numerical analysis. Maximum temperature is occured in the most right side inside normal spot. The temperature is increased abruptly inside the normal spot, and decreased more gradually outside normal spot in the direction of moving field as velocity is increased. Increasing the velocity rather than increasing magnitude of the normal spot and the applied field makes maximum temperature larger. Heat dissipation is affected by the velocity rather than the magnitude of normal spot and the applied field.

• Journal of Acupuncture Research
• /
• 제21권4호
• /
• pp.149-157
• /
• 2004

Objective : The purpose of this study is to research whether Inyeong Chon spot pulse(人迎氣口脈) could be used on application of Ohaeng-acupuncture(五行鍼法). Methods : I research ${\ll}$Naegyeong${\gg}$(內經) and annotations were excerpted and record that notied the Inyeong Chon spot pulse(人迎氣口脈). Results : Comparison of Inyeong Chon spot pulse and Deficiency Excess syndrome of meridian system is useful to use Zheng Ge(正格) and Sheng Ge(勝格) of Ohaeng-acupuncture(五行鍼法) but in application of Han Ge(寒格) and Re Ge(熱格), Inyeong Chon spot pulse(人迎氣口脈) is not useful.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1997년도 추계학술대회 논문집
• /
• pp.127-131
• /
• 1997

In systematic and orderly estimation of fatigue strength of the spot welded lap joints, because the influence of residual stress of fatigue crach initiation and growth is not negligible, there need to estimate fatigue strength considered residual stress at near spot weld part of the lap joints. Therefore, in this thesis, peformed stress distribution and residual stress analysis at near the spot weld part by F.E.M and X-ray diffraction method, and obtained the maximum principal stress considered residual stress at nugget edge by superposing residual stress at nugget edge by superposing their results. From the results obtained above, we could find that fatigue strength of the IB-type spot welded lap joints was rearranged by the maximum principal stress considered residual stress at nugget edge and was entirely low about 13 percents compare with that neglected residual stress.

• International Journal of Automotive Technology
• /
• 제6권3호
• /
• pp.285-291
• /
• 2005

In this paper, the author proposes a fatigue damage parameter of spot welded joints under proportional loading. The proposed fatigue damage parameter is developed based on von Mises' equivalent stress and local structural stress at the edge of spot weld nugget. The structural stress at the edges of the weld nugget in each sheet is calculated using the forces and moments that are determined by finite element analysis. A structural equivalent stress is then calculated by von Mises' equivalent stress equation. The structural equivalent stresses are correlated to experimental fatigue life of the spot welded joints. The proposed parameter is evaluated with fatigue test data of spot welds subjected to multi axial and tensile-shear loads. Sheppard's parameter and Rupp and co-workers' parameter are also evaluated with the same test data to compare with the author's parameter. This proposed parameter presents a better correlation with experimental fatigue data than those of Sheppard's and Rupp and co-workers' parameter. The proposed parameter should be very effective for durability calculations during the early design phase since coarsely meshed finite element models can be employed.

• Journal of Welding and Joining
• /
• 제21권1호
• /
• pp.42-47
• /
• 2003

Stainless rolling stocks are usually fabricated by spot welding process without painting. Indentation on the surface of the car body after spot welding injures the beauty of the stainless rolling stocks. In this study, insulated electrode tips to reduce the indentation are developed and applied to the actual spot welding works. The developed tips are composed of head, neck, hole for cooling water, body and resistance material. They provide large surface contact area with the base materials during spot welding and enhance the current density by necking. Experimental results using the developed tips show that small indentation and sufficient tensile shear strength is produced due to large contact area and enhanced current density.

• 한국자동차공학회논문집
• /
• 제7권6호
• /
• pp.279-286
• /
• 1999

Failure of spot-weld joints in car body may cause noise, vibration and safety problems. Systematic procedures for estimating fatigue strength of general spot-weld joints are developed in this paper. Fatigue test results for various spot-welded specimens are analysed using the finite element method. It is found that the maximum principal strain at the nugget boundary on the inner surface governs the fatigue failure of spot-welded joints.

• 대한방사선기술학회지:방사선기술과학
• /
• 제10권1호
• /
• pp.37-41
• /
• 1987

Authors could recognize surrounding areas induding target area by the observable film density with spot radiography using Cu mask and also, radiographic images maintained high quality. Spot radiography has been utilized for a long time for the purpose of observing detail image by the control of scattered radiation. But it has been difficult to know body part in general spot radiography. Therefore it is thought that attempt to use Cu mask in spot radiography is very advantageous in a clinical examinations.

• Journal of Welding and Joining
• /
• 제21권2호
• /
• pp.70-75
• /
• 2003

Spot welding is a process that sheet metals are joined in one or more spot by heating at the faying interface. In this process, the spatter is dispersed from melted area. It has been reported that spatter generation has adverse effects on weld quality. However, no systematic study has been carried out to find out its effect on weld quality in resistance spot welding processes. In this study, specially designed specimen are used to perform experimental investigation of spatter generation and its effect. Major finding of this study show trends in tensile-shear strength for various amounts of spatter generated during spot welding process. Thus, optimum welding conditions are proposed in view of spatter generation and tensile-shear strength. (Received December 11, 2002)